• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.2
• /
• pp.91-97
• /
• 2006

For efficient removal of nitrogenous compounds produced in recirculating aquaculture system, the N removal characteristics of immobilized mixed microorganisms were investigated at various mixing ratios of photosynthetic bacteria (PSB) immobilized in PVA beads or CTA cubes and ammonium utilizing bacteria (AUB) immobilized in PVA beads. On the optimal medium of AUB, the maxium gas production rate was obtained at the mixing ratio of 10:40 (PSB:AUB), and the gas production rate increased as the portion of AUB beads in the mixed beads increased. When the mixing ratios of PSB:AUB beads were 50:0, 40:10, 25:25 and 10:40, the final pHs were measured to be 6.29, 6.01, 5.69 and 5.13, respectively. On the optimal medium of PSB, however, the volume and the rate of gas production decreased remarkably as the portion of AUB beads in the mixed beads increased. The final pH was measured to be approximately 6.5, regardless of the mixing ratio. In the reactions by the mixed culture of PSB cubes and AUB beads, all results showed the same tendency of those by the mixed culture of PSB and AUB beads, but the volume and the rate of gas production decreased remarkably, even with 0.2ml of gas production in control. From all the results, the use of mixed PSB and AUB beads at the ratio of 10:40 seems to be efficient to remove nitrogenous compounds in wastewater from recirculating aquaculture system.

• Korean journal of food and cookery science
• /
• v.22 no.1 s.91
• /
• pp.88-95
• /
• 2006

To enhance the acceptance of hondonbyung ddeuksal, the optimal conditions for the addition of the leaf and root of Angelicae powder were evaluated with the central composite design and response surface methodology. With variations in the mixing ratio of the leaf and root of Angelicae powder, the smell and overall quality of hondonbyung differed significantly, but the color, taste and texture did not. The optimal conditions for the leaf and root content of Angelicae powder, predicted on the basis of each corresponding sensory parameters of hondonbyung ddeuksal, were $2.25\sim3.00%\;and\;0.50\sim0.63%$ for color, 1.55% and 0.85% for smell, 1.95% and 0.80% for taste, $1.00\sim1.22%\;and\;0.58\sim0.99%$ for texture and $2.79\sim3.00%\;and\;0.50\sim0.56%$ for overall quality, respectively. As for hondonbyung komul, there were no significant differences in color, smell, taste, texture or overall quality among the traditional group, and 10% and 20% reduced sweetener' groups.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.25-36
• /
• 2017

This research was conducted to investigate the removal characteristics of heavy metals and sulfate ion from acid mine drainage (AMD) by multi-functional zeolite-slag ceramics (ZS ceramics), in which natural zeolite and converter slag were mixed and calcined at high temperature. The batch test showed that the removal efficiency of heavy metals by pellet-type ZS ceramics increased as the mixing weight ratio of converter slag to natural zeolite increased. The optimal mixing ratio of natural zeolite to converter slag for the removal of heavy metals and sulfate ion from AMD was observed to be 1:2~1:3. The adequate calcination temperature and time of ZS ceramics for the treatment of AMD were found to be $600{\sim}800^{\circ}C$ and 2 hours, respectively. The removal test of heavy metals and sulfate ion from AMD by the ZS ceramics prepared in optimal condition exhibited very high removal efficiencies close to 100% for all heavy metals (Al, As, Cd, Cu, Fe, Mn, Pb, Zn) and 77.1% for sulfate ion. The experimental results in this study revealed that the ZS ceramics could function as an effective agent for the treatment of AMD.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.666-680
• /
• 2006

To obtain basic data for the utilization of saltwort (Salicornia herbacea L.) as a functional ingredient in steamed foam cake, the optimum component ratios for major raw ingredients (saltwort, salt, and wheat flour) as independent variables that affect the product quality were scientifically determined using RSM (response surface methodology) technique. A three-factor and five-level rotational central composite design was used for treatment arrangement. The complete design consisted of 16 experimental points. The three independent variables selected for the RSM experiment were amounts of saltwort (X$_1$, 5${\sim}$25 g), salt (X$_2$, 0${\sim}$10 g), and wheat flour (X$_3$, 470${\sim}$530 g). The optimum responses in specific gravity of the batter and volume, color, texture, and sensory evaluation result of the cake were obtained. The specific gravity and viscosity of the batter at p<0.01 was verified from the regression curve. The characteristic of the batter was influenced by all independent variables, but was extremely dependent on the amount of saltwort ordinary points of the surface responses from the batter formed the minimum points for specific gravities of the batter while viscosities of the batter appeared with the saddle points. Analysis of the response indicated that the amount of saltwort was the most influential factor over the physical properties of the cake, among the dependent variables. Ordinary points of the surface responses from the cake formed the maximum points for loaf volume, hardness gumminess, and chewiness, while Hunter colorimetric parameters appeared with the saddle points. The result indicated that level of the saltwort deviating more or less from the optimal amount decreased the volume and increased the specific gravity with less tender product. Ordinary points of the surface responses of the sensory evaluation scores from the cake formed the maximum points for appearance, flavor, softness, and overall acceptability, while color values appeared with the saddle points. The result also indicated that the level of the saltwort deviating more or less from the optimal amount reduced the preference for the product. Integration of the optimum responses common to all dependent variables that overlapped all the contour maps finally indicated that the combination of 8.3${\sim}$13.8 g saltwort, 2.5${\sim}$6.6 g salt, and 486.5${\sim}$511.5 g wheat flour under the selected preparation recipe optimized the physical and sensory properties in the teamed foam cakes. Practical preparation of the product with median amounts of the ingredients, i.e., 11.0 g saltwort, 4.6 g salt, and 499.0 g wheat flour resulted in similar qualities to the predicted responses. In conclusion, these study results indicated that preparation of steamed foam cake with added saltwort ingredient could potentially produce a more nutritious product with less salt. Further research is required to acquire the optimum levels for sub-ingredients to improve the product quality.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.289-298
• /
• 2023

In this study, the development of a self-healing concrete waterproofing agent was examined, focusing on its manufacturing and waterproofing properties. The optimal ratio using microcapsules for the concrete waterproofing agent was determined through assessments of flow, compressive strength, and permeability conducted during the mortar stage. These findings aimed to provide fundamental data for evaluating the self-healing properties of the concrete waterproofing agent designed for use in concrete structures. The self-healing concrete waterproofing agent was comprised of three types of inorganic materials commonly used for repair purposes. From experimental results, a composition ratio with a high potassium silicate content, referred to as SIM-2, was found suitable. A surfactant mixing ratio of 0.03 % was identified to enhance the dispersibility of the concrete waterproofing agent, while a mixing ratio of 0.2 % distilled water was deemed suitable for viscosity adjustment. For the magnetic self-healing concrete waterproofing agent's healing agent, using microcapsules in the range of 0.5 % to 0.7 % met the KS F 4949 and KS F 4926 standards.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.97-104
• /
• 2003

Hydrogen fermentation of food waste and sewage sludge was performed in serum bottles under various volatile solids(VS) concentrations(0.5~5.0%) and mixing ratios of two substrates(0:100-100:0, VS basis). Full quadratic equations, optimal conditions, and 90% acceptable conditions for hydrogen production potential and rate were obtained using cumulative methane production data and response surface methodology. The specific hydrogen production potential of food waste was higher than that of sewage sludge. However, hydrogen production potential increased as sewage sludge composition increased up to 13~19% at all the VS concentrations. The maximum specific hydrogen production potential of 122.9 mL/g $carbohydrate_{added}-COD$ was found at the waste composition of 87:13(food waste:sewage sludge) and the VS concentration of 3.0%. The relationship between carbohydrate concentration, protein concentration, and hydrogen production potential indicated that enriched protein by adding sewage sludge might enhance hydrogen production potential. The maximum specific hydrogen production rate was 111.2 mL $H_2/g$ VSS/h. Food waste and sewage sludge were, therefore, considered as a suitable main substrate and a useful auxiliary substrate, respectively, for hydrogen production.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.114-118
• /
• 2009

With the advance of industrialization and urbanization, a lot of waste has been discharged and treated by incineration. But fly and bottom ashes are generated in this process. In addition, the treatment method to recycle sewage sludge and melting slag is required to manage these wastes. The objective of this research was to prepare of multi-functional brick which were made from MSWI (Municipal solid wastes incinerator) fly ash, sewage sludge and slag. The bricks were made by mixing raw materials and then drying for 24 hours. Next, they were dried for 24 hours at $160^{\circ}C$ and fired for 2 hours. Calcination temperature was changed to discuss the effect of temperature from $1,080^{\circ}C$ to $1,130^{\circ}C$. Compressive strength of a brick was creased with the increase of temperature. To increase mixing ratio of fly ash and slag reduce the compressive strength the optimal condition was the mixing ratio of fly ash : melting slag : sewage sludge : clay as 10 : 20 : 5 : 65 and $1,150^{\circ}C$ of calcination temperature. Compressive strength was obtained as about 41 MPa at this condition.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.167-173
• /
• 2017

Purple-fleshed potato powder (PFPP) was investigated to determine optimal mixing ratio with milk powder and dextrin to produce a ready-to-eat mashed potato powder. The rheological characteristics, color, and anthocyanin contents were studied at a different concentration of ingredients. The power-law model was applied to explain the mechanical spectra of mashed potatoes which represented the change in structure induced by different mixing ratios. Mixture design was used to obtain the experimental points used to establish the empirical models to describe the effects of each ingredient on the characteristic of the mashed potato. The results of mechanical spectra showed that both storage and loss moduli (G' and G'') were significantly influenced by PFPP and milk powder concentration. The power law parameters n' and n'' showed higher values for the mashed potato with a lower concentration of PFPP and a higher concentration of milk powder, which showed that the gel networks involved in the mashed potato were weaker. The optimum mixing ratio with the highest redness and anthocyanin content, while maintaining the rheological properties similar to the commercial mashed potato, was determined as PFPP:milk powder:dextrin = 90.49:4.86:4.65 (w/w). The proportions of PFPP and milk powder in the formulation significantly changed the characteristics of mashed potato, whereas no significant effect of dextrin was observed in this formulation.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.4
• /
• pp.583-594
• /
• 2016

The purpose of this study was to determine the optimal mixing ratio of olive oil, parmesan cheese, and nuts for preparation of pesto with spinach. Based on a surface response methodology (RSM), the independent variables were olive oil (100~300 g), parmesan cheese (25~75 g) and nuts (12~36 g). The dependent variables were physico-chemical properties as pH, color values (L, a, and b values), viscosity and sensory evaluation. pH decreased with increasing parmesan cheese levels. The L value decreased and the a and b values increased with increasing olive oil levels. Viscosity was negatively correlated with olive oil levels but positively correlated with the amounts of parmesan cheese and nuts. The addition of oil exerted a positive effect on gloss, and oily taste. In the sensory evaluation, the values of appearance, color, flavor, taste and overall acceptance were in the range of 4.4~7.2, 3.7~7.4, 4.4~7.1, 3.9~7.3 and 3.5~7.6, respectively. The sensory evaluation results showed significant values in appearance (p<0.01), flavor (p<0.01), taste (p<0.01) and overall acceptance (p<0.05). The optimal amounts of spinach pesto with olive oil, parmesan cheese, and nuts were determined by numerical optimization of a canonical model and graphical optimization. The optimal amounts were 175.29 g of olive oil, 49.51 g parmesan cheese, and 27.37 g of nuts per 100 g of spinach.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.5
• /
• pp.512-524
• /
• 2013

The purpose of this study was to investigate the antioxidative effects of Mori Cortex Radicis powder and to determine the optimal mixing ratio of Mori Cortex Radicis powder and water in the preparation of bread. The optimal sensory composite recipe was determined by producing bread with different levels of Mori Cortex Radicis powder and water. The analysis was performed using response surface methodology and a sensory evaluation was performed with the data. Ten experimental recipes, including two with reference points in the composition, were selected. In terms of the antioxidative effects of Mori Cortex Radicis powder, the $IC_{50}$ for total phenolic content and DPPH free radical scavenging activity were 149.56 GAE/g dry powder and 137.77 /mL respectively. Measurement results of the mechanical properties showed differences in volume (p<0.05), baking loss (p<0.05), yellowness (p<0.01), lightness (p<0.01), redness (p<0.01), hardness (p<0.01) and springiness (p<0.05). The sensory measurements showed significant values for color (p<0.05), appearance (p<0.05), flavor (p<0.01), taste (p<0.01), and overall quality (p<0.01). Overall, based on numerical and graphical methods, the optimal formulation was determined to be 21.16 g of Mori Cortex Radicis powder and 372.47 g of water.