• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.911-921
• /
• 2012

The objective of this study was to determine the optimum mixing ratio of Opuntia humifusa powder and sugar in the preparation of muffin. The optimal sensory composite recipe was determined by following the central composites for muffin with different levels of Opuntia humifusa powder (A) and sugar (B). The analysis was performed using the response surface methodology, and the sensory evaluation was performed with the data. Ten experimental recipes, including two with reference points in the composition, were selected. The compositional and functional properties were measured, and the physical and sensory values were applied to the mathematical models. Perturbation plots showed the effects of each ingredient on the final product. Measurements showed significant values in lightness (p<0.05), sweetness (p<0.05), hardness (p<0.05), gumminess (p<0.05) and cohesiveness (p<0.01). The sensory measurements showed significant values in color (p<0.05), flavor (p<0.05), appearance (p<0.05), softness (p<0.05) and overall quality (p<0.05). Based on the numerical and graphical methods, the optimal formulation was determined to be 6.10 g of Opuntia humifusa powder and 82.61 g of sugar.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.1053-1060
• /
• 2015

In this study, the optimal operation factors for struvite crystallization for removing and recovering nitrogen and phosphorus from anaerobic digestive fluid of swine manure containing highly concentrated nitrogen was determined. Every experiment for the struvite crystallization reaction was conducted by placing 1,000 mL of digestion fluid in a 2,000 mL Erlenmeyer flask at various temperatures, pH, and mixing speed. Except for special circumstances, the digestion fluid was centrifuged (10,000 rpm, 10 min) and then the supernatant was used for the experiment at room temperature and 100 rpm. The optimal mole ratio of $PO_4{^{3-}}:Mg^{2+}$ was 1:1.5, and the pH effect ranging from 9 to 11 was similar, when mixed for 1 hour. Under this condition, the removal efficiency of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ was 40% and 88.6%, respectively. X-shaped crystal was observed by light and scanning electron microscopy. In addition, struvite crystal structure was confirmed through X-ray diffraction analysis.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.2
• /
• pp.97-104
• /
• 2013

The objective of this study is to investigate the optimal condition for macerating enzymatic extraction process that leads to the highest yield and the largest extracted amount of bio-active contents from Rubus coreanus Miq. fruit. The optimal extraction conditions were found as the following: The initial amount of the water added to the fruit was 20 ~ 30% by weight. The mixing ratio used for the macerating enzyme was 4 : 1 : 2 (w : w : w) for cellulase:pectinase:amylogucosidase, and the amount of the macerating enzyme added was 2% by weight. The extraction process was done at a temperature of $45{\sim}50^{\circ}C$ for 10 hours. The extraction yields on Rubus coreanus Miq. fruit by macerating enzymatic extraction process was increased by 84.3% compared to that of hot-water extraction process. The amounts of organic acids and vitamin found in the extract were also higher. The amount of polyphenol and anthocyanin contents in the extract were 185% and 257% of those from hot-water extraction, respectively. These results suggest that macerating enzymatic extraction is an effective method to boost extraction yield and to increase the amount of extraction of bio-active contents from Rubus coreanus Miq. fruit.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.186-199
• /
• 2016

The purpose of this study was to determine the optimal composite recipe of rice muffins with 3 concentrations of Spergularia marina L. Griseb, sugar and grape seed oil, using central composite design. In addition, the mixing condition of rice muffins was optimized by subjecting it to sensory evaluation and mechanical and physicochemical analysis using response surface methodology (RSM). In regard to its antioxidant effects, Spergularia marina L. Griseb had a total phenol and flavonoid contents and DPPH free radical scavenging activity of 17.03 mg/g, 5.13 mg/g and 17.21%, respectively. The results of mechanical and physicochemical analysis showed significant values for lightness, redness, yellowness, hardness, springiness, chewiness, gumminess, cohesiveness, height, volume, weight, specific volume, loss rate, pH, moisture, sweetness and saltiness (p<0.05), and the results of sensory evaluation showed significant values for color, flavor, taste, softness, appearance and overall quality (p<0.05). As results, optimal sensory ratio was found to be 6.69 g of Spergularia marina L. Griseb, 41.89 g of sugar and 30.48 g of grape seed oil.

• Journal of the Korean Dietetic Association
• /
• v.23 no.1
• /
• pp.14-26
• /
• 2017

The purpose of this study was to determine the optimal recipe of rice cookies with two different amounts of Stevia rebaudiana leaf and grape seed oil, using a central composite design (CCD). In addition, mixing conditions of rice cookies were optimized by sensory evaluation and mechanical and physicochemical analysis using response surface methodology (RSM). RSM was used to obtain 10 experimental points (including two replicates of Stevia rebaudiana leaf and Grape seed oil), and the formulation of Stevia rebaudiana leaf added rice cookies was optimized using rheology. The results of mechanical and physicochemical analysis showed significant values for lightness, redness, yellowness, hardness, spread factor, loss rate, leavening rate, sweetness, moisture, pH, and density (P<0.001), results of the sensory evaluation showed significant values for color, flavor, taste, texture, appearance, and overall quality (P<0.05). As a results, optimal sensory ratio was found to be 1.98 g of Stevia rebaudiana leaf and 37.94 g of Grape seed oil.

• Korean journal of food and cookery science
• /
• v.32 no.3
• /
• pp.279-289
• /
• 2016

Purpose: This study was to determine the optimal composite recipe of rice cookie with 3 concentrations of Spergularia Marina L. Griseb, sugar and grape seed oil, using central composite design (CCD). Methods: The mixing condition of rice cookie was optimized by subjecting it to sensory evaluation and mechanical and physicochemical analysis using response surface methodology (RSM). Results: The results of mechanical and physicochemical analysis showed significant values for lightness, redness, yellowness, hardness, spread factor, loss rate, leavening rate, density, pH, moisture, sweetness and saltiness (p<0.05), and the results of sensory evaluation showed significant values for color, flavor, taste, texture, appearance and overall quality (p<0.05). As a result, the optimal sensory ratio was found to be 6.40 g of Spergularia Marina L. Griseb, 63.49 g of sugar and 106.19 g of grape seed oil. Conclusion: In conclusion, Spergularia Marina L. Griseb is a good source in natural antioxidant aimed at replacing salt, and it is possible to use in cookie or other food products to substitute salt.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.96-101
• /
• 2002

This research was conducted to find the optimal condition in codigestion of food waste and sewage sludge with various mixing ratios. The analysis of degradation characteristics were based on the variations of methane production as well as methane production rate (MPR). BMP values were getting higher as the addition of foodwaste increased. But the lag-phase were prolonged when the foodwaste was over 40%, Nonlinear regression was conducted with the cumulative methane production data. Not only thermophilic but mesophilic condition, 40% of foodwaste addition showed maximum MPR. Higher mixing ratio which is over 50% were unprofitable in gaining higher MPR values. The most important factor in thermophilic co-digestion was substrate concentration. But in mesophilic co-digestion, both substrate concentration the mixing ratio had major effects on MPR. The most probable reasons of the synergetic effects in co-digestion of foodwaste and sewage sludge were the balanced nutrient expressed as C/N ratio and increased kinetic constants of hydrolysis by the mixed co-substrates.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2020

This study was carried out to get the optimum conditions for manufacturing high refractive glass beads from waste fluorescent lamp glass. Chemical composition, X-ray diffraction pattern, particle size distribution, refractive index of glass beads, and the effect of air mixing ratio and ejection rate were investigated. The obtained results are as follows. The X-ray diffraction pattern and chemical composition of glass beads made of waste fluorescent glass are similar to common glass except ReO₂ 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% and CaO 7.8 wt% but 11.7 wt% of common glass. The glass beads made of waste fluorescent lamp glass have the narrower particle size distribution of and the higher refractive index than the glass beads made of common glass. The optimal conditions of kiln operation for manufacturing glass beads from waste fluorescent lamp glass are 20 m/sec of ejection rate, 1.7 of air mixing ratio, and 940℃ of temperature.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.299-306
• /
• 2023

In this study, the O/W emulsification processes with the natural surfactants that were extracted from Medicago sativa L. and Sapindus saponaria L. as emulsifiers were optimized using the central composite design-response surface methodology (CCD-RSM). Herein, independent parameters were the amounts of mixed emulsifiers, the mixing ratio of natural emulsifiers (soapberry saponin/alfalfa saponin), and the emulsification time, whereas the reaction parameters were the emulsion stability index (ESI), mean droplet size (MDS), and antioxidant activity (DPPH radical scanvenging activity). Through basic experiments, the ranges of operation variables for the amount of mixed emulsifiers, the mixing ratio of natural emulsifiers, and the emulsification time were 12~14 wt%, 30~70%, and 20~30 min, respectively. The optimum operation variables deduced from CCD-RSM for the amount of mixed emulsifiers, the mixing ratio of natural emulsifiers, and the emulsification time were 13.2 wt%, 44.2%, and 25.8 min, respectively. Under these optimal conditions, the expected values of the ESI, MDS, and antioxidant activity were 88.7%, 815.5 nm, and 38.7%, respectively. And, the measured values of the ESI, MDS, and antioxidant activity were 90.6%, 830.2 nm, and 39.6%, respectively, and the average experimental error for validating the accuracy was about 2.1%. Therefore, it was possible to design an optimization process for evaluating the O/W emulsion process using CCD-RSM.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)