• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.695-702
• /
• 2012

본 연구에서는 개념설계 단계에서의 해석 결과의 정확도를 높이기 위한 다정밀도 해석과 모든 분야의 요구도를 만족하기 위한 다분야통합 설계 최적화 기법을 적용하였다. 무인항공기의 해석을 위하여 경험식 기반의 저정밀도 해석도구들이 초기 사이징, 공력, 추진, 임무, 중량, 성능, 안정성 도구들로 모듈화되어 개발 및 검증되었다. 개발된 해석도구를 이용하여 설계통합 프로그램을 구성하고, 설계의 정확도를 증가시키기 위하여 다정밀도 해석에 와류 격자법을 이용하였다. 다분야통합 설계 최적화를 위하여 MDF 기법이 적용되었다. 또한 최적화 도구로는 구배기반 최적화 기법을 적용하였다. 제시한 방법의 타당성을 밝히기 위하여, 저정밀도 해석만을 적용한 방법과 다정밀도 해석을 적용한 두 가지 방법의 최적화 결과를 비교하여 본 연구에서 제안된 다정밀도 해석이 개념설계 단계에서 적용 가능함을 보였다.

• 농업과학연구
• /
• 제43권4호
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.

• 대한조선학회논문집
• /
• 제58권5호
• /
• pp.294-302
• /
• 2021

In this study, the 3D printing technique called design for additive manufacturing (DfAM) that is widely used in various industries was applied to marine leisure ships of equipment. The DfAM for the stanchion for crew safety was applied to the equipment used in an actual recreational craft. As design constraints, the design alternatives were not to exceed the safety and weight of the existing stainless steel material, which were reviewed, and the production of a low-cost FFF-type 3D printing method that can be used even in small shipyards was considered. Until now, additive manufacturing has been used for manufacturing only prototypes owing to its limitations of high manufacturing cost and low strength; however, in this study, it was applied to the mass production process to replace existing products. Thus, a design was developed with low manufacturing cost, adequate performance maintenance, and increased design freedom, and the optimal design was derived via structural analysis comparisons for each design alternative. In addition, a life-cycle assessment based on the ISO 1404X was conducted to develop sustainable products. Through this study, the effectiveness of additive manufacturing was examined for future applications in the shipbuilding industry.

• 한국광학회지
• /
• 제14권4호
• /
• pp.443-448
• /
• 2003

인공위성 카메라에 장착되는 반사경의 경량화 설계를 위해 최적설계법을 적용하였다. 최적설계 과정에서 목적함수로는 카메라가 탑재된 인공위성의 발사비용을 줄이기 위해 반사경의 무게를 최소화하는 것으로 설정하였다. 반사경의 자중에 의한 변형(피크-밸리값) 및 고유진동수의 크기를 제한조건으로 두었다. 최적화 프로그램은 DOT(Design Optimization Tools)를 이용하여 유한차분법으로 설계변수에 따른 목적함수와 제한조건의 민감도를 구하였고 구성한 최적설계 프로그램의 검증을 위해 검증예제를 다루었다. 또한 최적설계로 부터 얻은 결과값으로 부터 반사경의 유한요소모델을 구성하고 유한요소해석 및 광학적 물성치 해석프로그램을 연계한 통합프로그램을 통하여 최적설계 결과 검증을 수행하였다. 최종적으로 위의 최적설계 프로그램을 이용하여 유효직경이 600mm인 반사경을 설계하였다.

• 한국강구조학회 논문집
• /
• 제10권3호통권36호
• /
• pp.553-564
• /
• 1998

최근도심지의 극심한 교통체증의 해소를 위한 방안으로 2층도로 강구조 덱 시스템의 채택이 증가하고 있다. 그 주된 이유는 신속한 시공과 콘크리트덱에 비하여 자중의 감소효과가 크고 보다 큰 강도와 효율적인 가설이 가능하기 때문이다. 본 연구의 목적은 강구조 덱 시스템의 최적설계프로그램을 이용한 2층도로용 강구조 덱 시스템의 가장 합리적인 형식 결정에 관한 연구이다. 최적화의 목적함수는 최소 초기비용으로 정식화하였다. 설계 제약조건은 도로교시방서의 ASD설계기준에 맞추어 정식화하였으며 최적설계과정은 두 단계로 이루어져 있다. 첫 번째 단계는 박스 또는 플레이트주형에 대한 강구조 덱 시스템의 최적설계가 수행된다. 그리고 두 번째 단계에서 개단면 또는 폐단면리브를 갖는 강상판에 대하여 최적설계를 한다. 최적설계 프로그램의 구조해석은 주형에 대하여 격자해석 모델링을 이용하였고 강상판에 대해서는 Pelican-Esslinger법을 사용하였다. 최적화 기법은 SQP를 이용하였다. 적용 예의 각 형식별 강구조 덱 시스템의 최적설계 결과의 비교를 통하여 비용의 효율성을 검토하였고 폐단면리브를 가지는 직선 형상의 박스거더 형식이 가장 효율적이고 경제적으로 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.354-357
• /
• 2008

In this study, the casting process using forged insert was applied to manufacturing a knuckle, in order to prove that application of casting process using forged insert is likely to get the effect of light weight and superior mechanical characteristic compared with existing casting products. Firstly, in the forging experiment, it was confirmed that the optimal configuration of the forged insert could be predicted by FE analysis. And by using FVM (Finite Volume Method) software, it was verified that a proposed casting design was available. To identify the mechanical characteristic of the final casting product, the microstructual observation and hardness test were performed at the boundary zone between forging and casting part.

• Steel and Composite Structures
• /
• 제37권4호
• /
• pp.493-501
• /
• 2020

The paper describes an optimization method based on the mathematical model of interaction within multibody 'bridge-track-cars" dynamic system. The interaction is connected with considerable dynamic phenomena influenced by high traffic speed (up to 400 km/h) on high-speed railroads. The trend analysis of a structure is necessary to determine the direction and resource of optimizing the system. Thus, scientific methods of decision-making process are necessary. The process requires a great amount of information analysis dealing with behavior and changes of the "bridge-track-cars system" that consists of mechanisms and structures, including transitions. The paper shows the algorithm of multi-criteria optimization that can essentially reduce weight of a bridge superstructure using big data analysis. This reduction is carried out in accordance with the constraints that have to be satisfied in any case. Optimization of real steel-concrete beam is exemplified. It demonstrates possibility of measures that are offered by the algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.261-264
• /
• 1997

A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.36-44
• /
• 1993

In the development of a high speed and light weight manipulator, it is necessary to consider the flexibility of a robotic arm. The infinite dynamics must be analyzed to obtain the finite mode modeling to achieve the feasible controller design of the robotic arm. The modeling procedures of the flexible robot arm, and natural frequencies and mode shapes by the constrained and unconstrained mode method are illustrated. The transfer function of the robot arm with a payload is also shown. The controller is designed by the pole assignment and optimal control theory to compensate for the unmodelled dynamic effects to the low order system. Also, the pole assignment method involving the harmonic vibration mode is presented through computer simulation.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.1047-1054
• /
• 2000

A numerical simulation was made to delineate the re-distribution of tonal noise generated from the equally-spaced blade passing frequency (BPF). A pressure-wave model was employed to analyze the tonal noise. An optimal solution for diversifying the tonal peak noise was obtained by rearranging the unequally-spaced blade angles. This was based on the fact that the noise energy is transferred from BPF to the neighboring frequency band. A limit condition for the minimum blade angle spacing was imposed. The unbalancing problem was also considered to avoid the weight bias.