• 설비공학논문집
• /
• 제18권8호
• /
• pp.635-640
• /
• 2006

An optimizer has been applied for the optimal design of pipe diameters in the pipe flow network problems. Pipe network flow analysis, which is developed separately, is performed within the interface for the optimization algorithm. A pipe network is chosen for the test, and optimizer GenOpt is applied with Holder-Mead-O'Niell's simplex algorithm after solving the network flow problem by the Newton-Raphson method. As a result, optimally do-signed pipe diameters are successfully obtained which minimize the total design cost. Design cost of pipe flow network can be considered as the sum of pipe installation cost and pump operation cost. In this study, a practical and efficient solution method for the pipe network optimization is presented. Test system is solved for the demonstration of the present optimization technique.

• 한국항공운항학회지
• /
• 제23권2호
• /
• pp.15-20
• /
• 2015

This paper introduces a new airspace design method for continuous climb operation (CCO). The optimization problem is formulated as Mixed-Integer Linear Program (MILP) to maximize the upper limits of altitude on the waypoints to facilitate continuous climb for aircraft. In the proposed method, the interactions with other flight procedures are considered as well as various aircraft flight performances. The proposed method is applied to one of the departure procedures of Incheon International Airport (ICN) to demonstrate its performances.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.116-129
• /
• 1997

The objective of this study is to predict the minimization effect of the noise and vibration during the construction and the train operation regarding to the design modification of the Taegu Subway Line No. 1. It was suggested optimal control blasting methods to reduce the causing vibration Nuance to the resident in City Taegu and also proposed the better governing method to decrease the environmental hazard to the near buildings and residents during the train operation. When the high-density gaseous reaction of explosion products exerts a high pressure in motion outward, a dynamic stress field will be created in the surrounding buildings. Therefore, in the region close to the charge, permanent damage begins to occur at a great critical level of partial velocity, that is difficult from different structure as working conditions. It is reliable to predict that the damages could be reduced if we know the peak velocity and the exact reasons through the conducting of detail studies of structural analysis of the related buildings with the optimal blasting designs. A blasting technique should be deemed to take advantage of the reduction of damage of the surrounding rocks and structures to improve the in-city blasting. This is a typical in-city blasting operation where success depends on closely controlling the ground vibrations in case of better designed blasting methods. There are techniques that can be applied to prevent large vibrations from damaging the important buildings through the Route Modification of the Taegu Subway Line No. 1.

• 소성∙가공
• /
• 제6권5호
• /
• pp.446-455
• /
• 1997

A Combined extrusion operation consists of forward and backward extrusion forming and it is possible to make the process be simple by employing it. But the metal flow pattern induced by the operation is hard to analyze accurately because the flows are non-steady, which have at least two directions dependent upon each other. So engineers in the industrial factories had conducted the two extrusion operations separately. A new process was designed by the industrial expert for forming of an alu-minum preform using the combined extrusion operation. In this study, experiments and finite element analysis was carried out to determine the process parameters. Through the preliminary experiment, it was shown that warm forming condition was more desirable than cold or hot ones. And optimal shape of initial billet could be also determined. From the compatibility test, bonde-lube was chosen as the optimal lubricant and 20$0^{\circ}C$ as the material temperature by the inspection of micro-structure. The operation was simulated by the rigid-plastic finite element method to examine the metal flow. Disap-pearing of dead metal zone was observed as the punch fell down and desirable shape was obtained from the one operation. As a result of this study, 7 operations could be reduced and 225% of material saved.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.612-618
• /
• 2007

본 연구에서는 KT-1 계열 항공기 전륜착륙장치의 동적거동을 분석하고 충격흡수효율을 향상시키기 위한 완충기의 최적설계가 수행되었다. 전륜착륙장치는 ADAMS를 이용하여 2자유도계로 모델링하였으며 운영/환경 조건을 고려한 해석결과는 낙하실험결과와 잘 일치하였다. 또한 최적설계변수를 선정하기 위해 오일밀도, 오리피스 단면적과 같은 완충기 파라미터를 변화시켜 동적거동 및 충격흡수효율에 미치는 영향을 분석하였으며, 해석 결과 완충기 파라미터가 다른 파라미터들보다 큰 영향을 미쳤다. 유용방향탐색법을 사용하여 최적설계를 진행하였고, 최대효율을 나타낼 때 설계변수의 값을 산출하였다. 이러한 방법으로 전륜착륙장치의 최적설계를 통해 충격흡수효율과 동적거동능력을 향상시킬 수 있었다.

• 정보처리학회논문지B
• /
• 제11B권1호
• /
• pp.63-70
• /
• 2004

항만 운영은 크게 게이트부문, 야드 부문, 선석 부문으로 구분되며, 이들 부문에 대한 운영전략과 효율적인 자원할당이 항만의 생산성향상에 중요한 역할을 한다. 특히, 선석 부문에서의 자원할당 계획은 선석 계획으로서 선박의 작업시간과 직결되기 때문에 최적화를 필요로 한다. 선석 계획은 독립적인 자원할당이 아니라 야드 부문의 장치 공간 할당과 상호 관련성을 가지고 있다. 따라서 기존 연구들이 선석 계획에 대해 독립적인 자원할당을 연구한 것과 달리 야드의 장치 공간 할당과 상호 관련성에 중점을 두고 선석 계획의 최적화 모듈을 설계하였다. 선석 계획 최적화 모듈의 설계는 수리적 기법으로 표현된 기존의 제약조건에 야드의 장치공간 할당과 관련된 제약조건을 제안하여, 해를 탐색하고, 찾은 해를 최적화하는데, 타부탐색을 사용하여 선석 계획 최적화 모듈을 설계하였다. 그리고 선석 계획 최적화 모듈의 성능 실험에서는 야드의 장치공간 할당계획을 적용한 선석 계획이 그렇지 않은 경우에 비해 작업시간이 단축됨을 알 수 있었다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.239-245
• /
• 2013

Modern electric controlled valves are demanded that its solenoid actuator should be smaller size, lighter weight, lower consumption power, and higher response time. For achieving these purposes, the major design factors of solenoid actuator such as magnetic flux density, coil turn numbers, plunger size, bobbin dimension, and etc. are must be optimized. In this study, for optimal design of high speed solenoid actuator for hydraulic servo valve operation, we draw up governing equations which are composed by combination of electromagnetic theories and empirical knowledge, and deduct the values of major design factors by use of them. For more increase the operating speed, voice coil are used as main armature in manufacturing of prototype actuator. And, we have proven the propriety of the governing equations and speed increasing method by experiments using the hydraulic valve assembly adopted the prototype of solenoid actuator.

• 물과 미래
• /
• 제27권4호
• /
• pp.161-171
• /
• 1994

관수로시스템 최적설계는 수리학적 및 시스템 운영제약조건 아래서 시스템의 전체비용을 최소비용으로 구하는 것이다. 본 연구에서는 논관개용 수지상배관 시스템설계에 관해 상술하였다. 이는 선형계획론을 이론적 배경으로 하여 관로의 비용과 에너지비용을 함께 고려함으로서 시스템 전체비용으로 구하는 것을 시도하였으며 논 관개용 관수로시스템 설계에 있어서 두 개의 수요양상과 가압펌프를 고려함으로서 전체 시스템의 최소비용을 구하였다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.275-278
• /
• 2000

This paper focuses on a performance analysis model for optimizing the freight terminal design and layout using AutoMod simulator and numerical analysis. We developed a model to analyze the freiht terminal performance per unit time and the material handling cost based on both throughput and waiting due to conjestion. We developed computer program for this model and some sample results by both numerical method and AutoMod simulator are compared.

• Journal of Mechanical Science and Technology
• /
• 제18권1호
• /
• pp.37-44
• /
• 2004

This paper presents an approach to optimally design the air bearing surface (ABS) of the head slider by using the approximation methods. The reduced basis concept is used to reduce the number of design variables. In the numerical calculation, the progressive quadratic response surface modeling (PQRSM) is used to handle the non-smooth and discontinuous cost function. A multi-criteria optimization problem is formulated to enhance the flying performances over the entire recording band during the steady state and track seek operations. The optimal solutions of the sliders, whose target flying heights are 12 nm and 9 nm, are automatically obtained. The flying heights during the steady state operation become closer to the target values and the flying height variations during the track seek operation are smaller than those for the initial one. The pitch and roll angles are also kept within suitable ranges over the recording band.