• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.583-589
• /
• 2004

In a stream of aqueous sample, trace arsenic ions were quantitatively coprecipitated and detected in ICP-AES through hydride generation. In was used as a coprecipitating reagent. The precipitate was collected on a filter and dissolved by HCl. The eluted As was sent into the reaction coil to generate hydrides and analyzed by ICP. With optimal conditions, and with a sample of 0.3 mL, an enrichment of 70 was obtained with the sampling speed of 10/hr. When compared with coprecipitation and hydride generation technique, the sensitivity was increased by 7 and 10 times, respectively. The limit of detection limit$(3{\sigma})$ was 0.020 ${\mu}g\;L^{-1}$ and the precision was 7-10%. Separation of $As^{3+}\;and\;As^{5+}$ were possible using citric acid in hydride generation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.243-250
• /
• 2018

In this paper, design technique using genetic algorithms(GA) for design optimization of composite leaf springs is presented here. After the initial design has been validated by the car plate spring as a finite element model, the genetic algorithm suggests the process of optimizing the number of layers of composite materials and their angles. Through optimization process, the weight reduction process of leaf springs and the number of repetitions are compared to the existing algorithm results. The safety margin is calculated by organizing a finite element model to verify the integrity of the structure by applying an additive sequence optimized through the genetic algorithm to the structure. When GA is applied, layer thickness and layer angle of complex leaf springs have been obtained, which contributes to the achievement of minimum weight with appropriate strength and stiffness. A reduction of 65.6% original weight is reached when a leaf steel spring is replaced with a leaf composite spring under identical requirement of design parameters and optimization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.763-771
• /
• 2011

An optimization procedure for the design of a ventilation axial-flow fan is presented in this paper. Flow analyses of the preliminary fan are performed by solving three-dimensional Reynolds-averaged Navier-Stokes equations via a finite-volume solver with the shear-stress transport turbulence model as a turbulence closure. Three variables, the hub-to-tip ratio and the stagger angles at the mid and tip spans, are selected for the optimization. The Latin-hypercube sampling method as a design-of-experiments technique is used to generate twenty-five design points within the design space. and the weighted average surrogate models, WTA1, WTA2, and WTA3, are applied for find optimal designs. The results show that the efficiency is considerably enhanced.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.268-279
• /
• 2003

The nano capsulation of the ceramide was a technique that capsulated ceramide III and tocopheryl linoleate at the mono-vesicle, so as to act the horny layer in skin. It was used 0.5-5.0 wt% of hydrogenated lecithin and 0.01~2.00 wt% of lysolecithin as the membrane-strengthen agents of the mono-vesicle, 5.0~10 wt% of propylene glycol and 5.0~10.0 wt% of ethyl alcohol made by high-pressure Microfluidizer. To enhance the moisturizing efficacy and treat an atopy skin, used ceramide III and tocopheryl linoleate as the active ingredients, and it was made the nano-capsule that synthetic emulsifiers were free. The optimal condition of capsulation of nano ceramide was as follows. The conditions were 3 times at 1,000bar and 60-7$0^{\circ}C$. The particle size showed 63.1$\pm$7.34 nm such as the transparence water as the results for measuring by the laser light scattering. A zeta potential value was -55.1$\pm$0.84 ㎷. The result of the clinical test, the moisturizing effect (in-vivo, n=8, p-value<0.05) was improved 21.15% compared to control, as well as it was improved 36.31 % before the treatment. Moreover, the effectiveness of atopy skin indicated positive reaction that patients were 10 volunteers.

• Imaging Science in Dentistry
• /
• v.48 no.1
• /
• pp.45-49
• /
• 2018

Purpose: The aim of this study was to evaluate the quantitative strain elastography of tongue carcinoma using intraoral ultrasonography. Materials and Methods: Two patients with squamous cell carcinoma (SCC) who underwent quantitative strain elastography for the diagnosis of tongue lesions using intraoral ultrasonography were included in this prospective study. Strain elastography was performed using a linear 14 MHz transducer (Aplio 300; Canon Medical Systems, Otawara, Japan). Manual light compression and decompression of the tongue by the transducer was performed to achieve optimal and consistent color coding. The variation in tissue strain over time caused by the compression exerted using the probe was displayed as a strain graph. The integrated strain elastography software allowed the operator to place circular regions of interest (ROIs) of various diameters within the elastography window, and automatically displayed quantitative strain (%) for each ROI. Quantitative indices of the strain (%) were measured for normal tissues and lesions in the tongue. Results: The average strain of normal tissue and tongue SCC in a 50-year-old man was 1.468% and 0.000%, respectively. The average strain of normal tissue and tongue SCC in a 59-year-old man was 1.007% and 0.000%, respectively. Conclusion: We investigated the quantitative strain elastography of tongue carcinoma using intraoral ultrasonography. Strain elastography using intraoral ultrasonography is a promising technique for characterizing and differentiating normal tissues and SCC in the tongue.

• Advances in Traditional Medicine
• /
• v.9 no.2
• /
• pp.174-181
• /
• 2009

Pterocarpus marsupium, Clitoria ternatea, and Sanseveiria cylindrica are some of the important and endangered medicinal plant species of India. Despite of medicinal properties, antibacterial potential of the plants have not yet been explored. The present study was designed to optimize the in vitro technique for micropropagation and to screen the extracts from leaves and in vitro raised calli for antibacterial properties. Excised leaf-explants from the parent plants were surface sterilized and cultivated on Murashige & Skoog's (MS) medium containing $N^6$-benzyladenine (BA) in concentrations of 1, 2, 5, and $10{\mu}M$. Optimal growth of calli was noticed at a concentration of $5{\mu}M$, therefore the extracts from calli grown at this concentration were further studied for antibacterial activity. Both alcoholic and aqueous extracts from leaves of respective plants, and their in vitro raised calli were tested for antibacterial activity by agar well diffusion method against a range of Gram-positive and Gram-negative bacteria. Aqueous extracts showed antibacterial activity against limited number of bacterial species; notably the extracts of C. ternatea which showed antibacterial activity against Streptococcus pyogenes, Bacillus subtilis and Bacillus cereus. Alcoholic extracts of all three plants showed antibacterial activity against a wider range of bacteria. Among the Gram-positive bacteria, extracts from C. ternatea showed strong antibacterial activity against Bacillus spp., whereas the extracts of S. cylindrica showed good antibacterial potential for Staphylococcus aureus, S. epidermidis and S. pyogenes. The extracts from all three plants showed antibacterial activity against Gram-negative bacteria, including, Salmonella spp. and Shigella dysenteriae; organisms causing enteric fever and dysentery. In most of the cases, the extracts from respective calli showed comparable, and in some cases better, result in comparison to the extracts from parent leaves. To the best of our knowledge this is the first preliminary report on antibacterial potential, especially through calli extracts, of these plants; and in vitro cultivation of the explants may be used to obtain phytotherapeutic compounds.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.77-87
• /
• 2000

In this paper, we propose a Over-The-Cell channel routing algorithm for the advanced three-layer process. The proposed algorithm makes the channel routing problem to simplified one and makes use of simulated annealing technique to achieve the global optimal solution. And, a new method to remove the cyclic vertical constraints which are known to be the hardest element in the channel routing problem is proposed, and a way to detect the local minimal solution and escape from it successfully is presented. Futhermore, genetic algorithm based channel router is implemented and comparison is performed with the simulated annealing based one. All algorithms are written in C++ and GUI is made using Motif under Linux environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2002

The important issues of facility database management in GIS are to collect up-to-date information and to update information in accordance with new-establishment, repair and replacement of the facilities. Therefore, it is necessary to develop a system which has capability of monitoring facilities as well as managing database efficiently. The purpose of this study is to propose possibility of implementation of mobile GIS solution for the facility management. In order to achieve the goal, to process existing digital maps and to receive on-site information through the wireless communication service are required. In addition, the system is required to process spatial information obtained by GPS and digital photogrammetric technique with real-time updating database in server. The system increases efficiency both in work flow and monitoring for facility management by providing optimal routing information to the sites and real-time two-way communication using VoIP(Voice over Internet Protocol). The system is expected to perform real-time database management effectively. In consequence, the system could appropriately response on-site situations in various practical applications. The proposed technology could contribute to improve nation's leading-edge technology.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.293-301
• /
• 2004

This study analyzes the interrelationship with air pollution quality and land used patterns, and analyzes the history and optimal allocation of TMS using GIS. Seasonal air pollution map are maded of TMS data in study area, and land used patterns based on Land Cover Classification Map are reclassified as residential area, commercial area, industrial area, traffic concentrated area, and non-Polluted area. Pollution sources can be identified through analyzing the correlation of air pollution and land used patterns by GIS spatial overlaying technique. Hence, the result shows that it coincides with the characteristics of conventional air pollution. Air pollution quality measured by TMS shows similar to that of its near stations or the same land used patterns, through the history and allocation analysis of TMS. Therefore, it is need to consider these characteristics in setting TMS positions in the future.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.386-393
• /
• 2012

Portfolio selection methods based on stochastic receding horizon approach, which were recently reported in the field of financial engineering, can explicitly consider the dynamic characteristics of wealth evolution and various constraints in the process of performing optimal portfolio selection. In view of the theoretical value, versatility, and effectiveness that receding horizon approach has achieved in many engineering problems, dynamic portfolio selection methods based on stochastic receding horizon optimization technique have the possibility of becoming an important breakthrough. This paper observes through theoretical investigations that the SDP(semi-definite program)-based portfolio selection procedure can be simplified, and has obtained meaningful performance on returns from simulation studies applying the simplified version to Korean financial markets.