• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 춘계학술대회
• /
• pp.44-44
• /
• 2019

This study aimed to develop a suitable method for inducing the proliferation of prothallus and producing sporophytes of rock polypody (Polypodium vulgare L.). The prothalli used in all experiments were obtained from spore germination and sub-cultured for 8-week intervals. The most appropriate media for prothallus propagation were investigated by culturing 300 mg of prothallus in MS ($1/4{\times}$, $1/2{\times}$, $1{\times}$, and $2{\times}$ strength) medium and in Knop medium for 8 weeks. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\pm}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark). Fresh weight of prothalli was 4.8 g on $1{\times}$ MS, 4.5 g on $1/2{\times}$ MS and 4.3 g on 1/4 MS medium. To select a suitable soil combination for sporophyte formation, 1.0 g of prothallus was ground with distilled water, spread in five combinations onto different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and then cultivated for 13 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). The results showed that a mixture containing a 2:1 (v:v) ratio of horticultural substrate and perlite, increased sporophyte formation to 462.5 sporophytes per pot (7.5 cm2). The other soil substrates produced from 314.5 to 405.3 sporophytes per pot. Therefore, our results will provide conditions suitable for mass production of Polypodium vulgare L.

• 한국지반환경공학회 논문집
• /
• 제20권1호
• /
• pp.43-49
• /
• 2019

본 논문에서는 쏘일네일 설계에 위상최적화 기법을 도입하여 비탈면 높이별로 필요로 하는 보강력을 최적화하였다. 최대 비탈면 높이에서의 최적설계 결과를 보강형상밀도화하여 비탈면의 높이 변화에 따라 적용 시 쏘일네일의 수평간격의 위상최적화가 가능하였다. 단계별로 비탈면 높이를 달리하여 한계평형해석을 수행하고 쏘일네일의 수평간격이 고정값일 때 초과되는 안전율을 확인하였다. 비탈면 높이에 따른 필요 보강력을 밀도화 함으로써 최적화의 과정을 효율적으로 수행할 수 있었다. 또한 쏘일네일의 축력을 보강형상밀도에 반영하기 위하여 유한요소법을 이용하여 부재력을 반영하였다. 보강형상밀도를 산정하여 비탈면 높이별로 위상최적기법을 적용 시 비탈면 높이마다 기준안전율을 만족하는 반복적인 재해석과정을 효과적으로 감소시킬 수 있어 수평간격을 위상 최적화하는 방법이 경제적인 설계에 활용도가 높을 것으로 판단된다.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.39-45
• /
• 2022

Normal strategy of structure optimization procedure has been minimum cost or weight design. Minimum weight design satisfying an allowable stress has been used for the ship and offshore structure, but minimum cost design could be used for the case of high human cost. Natural frequency analysis and forced vibration one have been used for the strength estimation of marine structures. For the case of high precision experiment facilities in marine field, the structure has normally enough margin in allowable stress aspect and sometimes needs high natural frequency of structure to obtain very high precise experiment results. It is not easy to obtain a structure design with high natural frequency, since the natural frequency depend on the stiffness to mass ratio of the structure and increase of structural stiffness ordinary accompanies the increase of mass. It is further difficult at the grillage structure design using the profiles, because the properties of profiles are not continuous but discrete, and resource of profiles are limited at the design of grillage structure. In this paper, the grillage structure design system under the constraint of high natural frequency is introduced. The design system adopted genetic algorithm to realize optimization procedure and can be used at the design of the experimental facilities of marine field such as a towing carriage, PMM, test frame, measuring frame and rotating arm.

• 한국식품영양학회지
• /
• 제35권6호
• /
• pp.473-480
• /
• 2022

This study aimed to develop an optimal processing method for the production of apple-mango jelly for domestic suppliers, by analyzing the quality attributes of the jelly. According to the central composite design, a total of 11 experimental points were designed including the content of apple-mango juice (X₁), and the sugar content (X₂). The responses were analyzed including the color values (CIE Lab and color difference), physicochemical properties (water activity, sweetness, pH, and total acidity), and textural properties (hardness and gel strength). Regression analysis was conducted, except for total acidity, and showed no significant difference for all the experimental points (p<0.05). Quadratic model was derived for all responses with an R square value ranging from 0.8590 to 0.9978. Based on regression model, the appropriate mixing ratio of apple-mango jelly was found to be 31.11% of apple mango juice and 14.65% of sugar. Through this study, the possibility for developing jelly product using apple-mango was confirmed, and it is expected that these findings will contribute to the improvement of the agricultural industry.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.673-686
• /
• 2023

Determining the properties of pile from cone penetration test (CPT) is costly, and need several in-situ tests. At the present study, two novel hybrid learning models, namely PSO-RF and HHO-RF, which are an amalgamation of random forest (RF) with particle swarm optimization (PSO) and Harris hawks optimization (HHO) were developed and applied to predict the pile set-up parameter "A" from CPT for the design aim of the projects. To forecast the "A," CPT data along were collected from different sites in Louisiana, where the selected variables as input were plasticity index (PI), undrained shear strength (S_u), and over consolidation ratio (OCR). Results show that both PSO-RF and HHO-RF models have acceptable performance in predicting the set-up parameter "A," with R² larger than 0.9094, representing the admissible correlation between observed and predicted values. HHO-RF has better proficiency than the PSO-RF model, with R² and RMSE equal to 0.9328 and 0.0292 for the training phase and 0.9729 and 0.024 for testing data, respectively. Moreover, PI and OBJ indices are considered, in which the HHO-RF model has lower results which leads to outperforming this hybrid algorithm with respect to PSO-RF for predicting the pile set-up parameter "A," consequently being specified as the proposed model. Therefore, the results demonstrate the ability of the HHO algorithm in determining the optimal value of RF hyperparameters than PSO.

• 한국터널지하공간학회 논문집
• /
• 제12권2호
• /
• pp.165-175
• /
• 2010

최근에 물류비 절감, 교통 편의성 개선, 지역발전 등 정치, 경제, 사회적 요구에 따라 장대 해저터널 건설의 필요성이 증가하고 있다. 또한, 도심지에 건설되는 도로 및 철도터널에서도 터널의 장대화에 따라 공사용 및 환기용 수직구의 설치가 필수적이다. 수직구 굴착 후 설치되는 콘크리트 라이닝의 설계시 결정해야할 요소는 직경, 단면두께, 소요철근량 등이다. 이러한 수직구 직경, 하중조건, 지반조건을 고려하여 최적의 라이닝 단면설계를 위해서는 많은 구조검토가 필요하다. 본 연구에서는 이러한 다양한 조건에 대하여 구조해석을 수행하여 라이닝 단면설계도표를 제시하였다. 제안된 도표를 이용하여 간편하게 규모 및 하중조건에 따른 라이닝 단면두께 및 소요철근량 산정이 가능하다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2021년도 춘계학술대회
• /
• pp.23-23
• /
• 2021

Apple (Malus×domestica Borkh.; Rosaceae) is an important fruit crop grown mainly in temperate regions of the world. Tissue culture in vitro is a biotechnological technique that has been used to genetically improve cultivars (scions) and rootstocks. This could be important in the production of genetically uniform scions and rootstocks for commercial apple production. In nurseries, apple plants are produced by grafting scions onto rootstocks. The Cornell-Geneva (Geneva® series) breeding program has bred several dwarf rootstocks that are resistant to diseases and pests and are also cold hardy. This study was conducted to determine the optimal medium strength to improve sprouting shoot rate of apical meristem of the apple rootstocks of fire blight resistance. The apple rootstocks apical meristem at size (0.2 mm to 0.3 mm) with axillary buds were cultured on the MS(Murashige & Skoog) medium supplemented with plant growth regulators. The sprouting ratio and growth characteristics was evaluated after eight weeks in vitro culture. The highest rate of bud differentiation and shoot formation were 23.8% and 55.6%, respectively. After 6 weeks, shoots were regenerated from apical meristem, and their growth characteristics was significantly varied on the respective basal medium with different plant growth regulators. Our studies showed that the apple rootstocks the apple rootstocks of fire blight resistance plantlets could be successfully produced from apical meristem differentiated out of young twigs via organogenic regeneration.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.258-264
• /
• 2018

본 연구에서는 급경사면서의 식생기반재 부착 및 녹화성능 확보를 위해 혼입한 기능성 첨가재의 성능 평가를 수행하였다. 기능성 첨가재의 혼입조건에 따른 평가 결과, 급경사면의 부착이 가능하면서 식물의 생육에 원활히 수분 공급을 위한 기능성 첨가재로서 증점제 및 고흡수성 폴리머의 적정 혼입율은 각각 5%, 1% 인 것으로 판단된다. 시멘트 계열의 경화재로 인하여 높아진 pH에 대한 대책으로서 킬레이트 수지 10% 이상 혼입시 pH가 약알칼리에서 중성으로 회복되었다. 토양 전도도 평가 결과, 모든 배합조건에서 254~340mS/m으로 측정되어 기준인 1,000mS/m이하인 기준을 만족하였다. 기능성 첨가재의 최적 배합조건으로 도로비탈면 녹화공사의 설계 및 시공 지침에서 제시하는 경도를 측정한 결과 1bar의 압력으로 시공할 때, 18~23mm의 기준을 만족하였다. 급경사면에 대한 부착강도 평가를 위해 경사면 각도조건에 따라 분사 후 리바운드량과 산중식 경도계를 이용한 경도를 측정한 결과, 75도 각도에서도 리바운드율 15%미만, 경도 18mm이상의 성능 확보가 가능하였다.

• Animal Bioscience
• /
• 제35권12호
• /
• pp.1940-1947
• /
• 2022

Objective: This study examined the effects of dietary calcium (Ca) and non-phytate phosphorus (NPP) on performance, tibial characteristics, meat quality and plasma biochemical variables in yellow-feathered broilers during 85 to 105 d of age. Methods: A total of 720 heads of 85-d broilers were allocated into 9 groups and provided with three levels of Ca (0.65%, 0.75%, 0.85%), and NPP (0.25%, 0.30%, 0.35%) in diets for 21 d. Results: The final body weight (FW), average daily gain (ADG), average daily feed intake (ADFI), and feed to gain ratio (F:G) were affected (p<0.05) by dietary Ca. From the quadratic regressions, the optimal level of Ca in diet were 0.71% for FW and ADG, and 0.67% for ADFI. Dietary Ca and NPP both significantly affected tibial breaking strength and density. From the quadratic regressions, the optimal level of Ca and NPP in diet were 0.81% and 0.37% for tibial density. The shear force of breast muscle of broilers given 0.75% or 0.85% Ca were lower than that in birds with 0.65% Ca and drip loss of birds given 0.65% or 0.75% Ca was lower than that in birds with 0.85% Ca (p<0.05). The drip loss of birds given 0.25% NPP was lowest among all NPP treatments (p<0.05). Calcium affected (p<0.05) the plasmal contents of phosphorus, osteocalcin (OC), parathyroid hormone (PTH) and calcitonin and the contents of OC and PTH were also influenced by dietary NPP. Conclusion: Dietary Ca and NPP level affected tibial characteristics, meat quality and biochemical variables in plasma of finisher-phase yellow-feathered broilers (85 to 105 d) and Ca also affected growth performance. Dietary 0.71% Ca and 0.30% NPP were enough for growth performance, while considering the growth performance, tibial characteristics, meat quality and biochemical variables together, 0.75% Ca and 0.37% NPP were recommended.