• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.71-81
• /
• 2009

Die steel for plastic molding were used as mold material of automobile parts and electronic component industry. The material of this paper has superior to mechanical properties, such as repair weldability, corrosion resistance and high temperature strength, required mold parts for semitransparent. Laser-induced surface hardening technology is widely adopted to improver fatigue life and wear resistance via localized hardening at the surface of mold parts. The objective of this research work is to investigate on the characteristics of surface hardening of the laser process parameters, such as beam travel speed, laser power and defocsued spot position, for the case of die steel for plastic molding. Lens for surface hardening of large area is plano-convex type with elliptical profile to maintain uniform laser irradiation. According to the experimental results, large size of hardened layer at the surface of die steel for plastic molding was achieved, and microstructure of this layer was lath martensite. Optimal surface status and mechanical property of hardened layer could be obtained at 1095Watt, $0.25{\sim}0.3m/min$, 0mm (focal length: 232mm) for laser power, beam travel speed, and focal position. Where, heat input was $0.793{\times}10^{3}J/cm^2$, and width of hardened layer was 27.58mm.

• 한국콘텐츠학회논문지
• /
• 제15권3호
• /
• pp.477-487
• /
• 2015

학교장에게 학교 운영의 권한이 대폭 위임된 제주형 자율학교 운영에 대한 관심이 높아지는 가운데, 학교운영의 효율성을 높이기 위한 노력이 진행되고 있다. 본 연구는 자료포락분석(DEA)을 활용하여 제주형 초등자율학교의 상대적 효율성을 분석하는 데 목적을 두고 수행되었다. 중요한 결론은 다음과 같다. 첫째, 제주형 자율학교의 상대적 효율성에 큰 차이가 있었으나, 이러한 효율성의 차이는 규모 요인보다는 운영상의 문제로 나타났다. 둘째, 제주형 자율학교의 상대적 비효율성을 개선하기 위해서는 학생 및 학부모의 만족도를 높여야 하며, 특히 학무모 변인의 특성을 분석하고 그들의 요구를 반영하여 교육 프로그램의 질적 수준을 향상시켜야 한다. 셋째, 제주형 자율학교 운영의 효율성을 높이기 위해서는 학교평가에 가용한 자원을 충분히 활용하였는가를 판단하는 효율성 관점을 도입할 필요가 있다.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.451-456
• /
• 2023

Transparent conducting films having a three layered structure of ZnO/Cu/ZnO (ZCZ) were deposited onto the glass substrates by using RF and DC magnetron sputtering at room temperature. The emissivity and opto-electrical properties of the films were investigated with a varying thickness(5, 10, 15 nm) of the Cu interlayer. With increasing the Cu thickness to 15 nm, the films showed a enhanced electrical properties. Although ZnO 30/Cu 15/ZnO 30 nm film shows a lower resistivity of 5.2×10^-5 Ωcm, it's visible transmittance is deteriorated by increased optical absorbtion of the films. In addition, X-ray diffraction patterns indicated that the insertion of Cu interlayer improve the grain size of ZnO films, which is favor for the electrical and optical properties of transparent conducting films. From the observed low emissivity of the films, it is concluded that the ZCZ thin films with optimal thickness of Cu interlayer can be applied effectively for the car's window coating materials.

• Journal of Chest Surgery
• /
• 제49권sup1호
• /
• pp.28-36
• /
• 2016

Background: This study aimed to develop the models for regional cardiac surgery centers, which take regional characteristics into consideration, as a policy measure that could alleviate the concentration of cardiac surgery in the metropolitan area and enhance the accessibility for patients who reside in the regions. Methods: To develop the models and set standards for the necessary personnel and facilities for the initial management plan, we held workshops, debates, and conference meetings with various experts. Results: After partitioning the plan into two parts (the operational autonomy and the functional comprehensiveness), three models were developed: the 'independent regional cardiac surgery center' model, the 'satellite cardiac surgery center within hospitals' model, and the 'extended cardiac surgery department within hospitals' model. Proposals on personnel and facility management for each of the models were also presented. A regional cardiac surgery center model that could be applied to each treatment area was proposed, which was developed based on the anticipated demand for cardiac surgery. The independent model or the satellite model was proposed for Chungcheong, Jeolla, North Gyeongsang, and South Gyeongsang area, where more than 500 cardiac surgeries are performed annually. The extended model was proposed as most effective for the Gangwon and Jeju area, where more than 200 cardiac surgeries are performed annually. Conclusion: The operation of regional cardiac surgery centers with high caliber professionals and quality resources such as optimal equipment and facility size, should enhance regional healthcare accessibility and the quality of cardiac surgery in South Korea.

• Archives of Plastic Surgery
• /
• 제40권1호
• /
• pp.36-43
• /
• 2013

Background Because there are numerous methods for reconstruction of the lower lip, it is not easy to choose the optimal method. In choosing the surgical method for lower lip reconstruction, we obtained acceptable outcomes based on our treatment strategy, which included either a barrel-shaped excision or the Webster modification of the Bernard operation. We report on the surgical outcomes based on our treatment strategy. Methods This study included 26 patients who underwent lower lip reconstructive surgery from September 1996 to September 2010. The operation was done using either a barrel-shaped excision or the Webster modification, considering the location of the defect, the size of the defect, and the amount of residual tissue on the lateral side of the vermilion after excision. Results In our series, 3 patients underwent a single barrel-shaped excision, and nine patients underwent a double barrel-shaped excision. In addition, the unilateral Webster modification was performed on in 6 patients, and there were eight cases of bilateral Webster modification. All of the patients except one were satisfied with the postoperative shape of the lip. In one case both recurrence and dehiscence occurred. One patient had a good postoperative lip shape, but had difficulty wearing a denture, and also underwent commissuroplasty. Furthermore, there were two patients who complained of drooling, and 4 with paresthesia. Conclusions A soft tissue defect resulting from wide excision of a lower lip malignancy can be successfully reconstructed using only one of two surgical methods: the barrel-shaped excision or the Webster modification of the Bernard operation.

• 한국수자원학회논문집
• /
• 제45권3호
• /
• pp.275-290
• /
• 2012

본 연구에서는 극치강우의 시간분포 연구를 위하여 서울지점 우량관측소의 자기기록지를 1분단위로 독취한 MMR(minutely data using the magnetic recording)자료와 최근 들어 관측을 시작한 AWS (automatic weather system) 분단위기상관측 자료를 이용하여 연최대치 계열의 중앙값을 기준으로 한 POT(peaks over threshold) 계열 추출을 통하여 강우의 최적 시간분포 모형을 개발하였다. 기존 Huff 방법에서의 최대 단점인 지속기간별 시간분포 변화 특성을 고려하지 못하는 점과 강우사상별 강우총량에 대한 기준강우량의 일괄적용 등의 문제를 개선하였으며, 분단위 관측자료의 가중치 적용을 통한 순위결정으로 최빈분위를 선택하고 IQR (interquartile range) matrix의 적용을 통한 Quartile별 호우사상을 추출하는 방법을 제안하였다. 마지막으로 추출된 분단위 무차원 단위우량주상도에 핵밀도함수를 적용하여 자료의 크기와 분포 특성을 고려한 지속기간별 최적 시간분포형을 유도하였다.

• 한국해안·해양공학회논문집
• /
• 제23권5호
• /
• pp.345-357
• /
• 2011

최근 지구환경문제와 에너지원의 다각화를 위한 일환으로 파랑에너지를 이용하는 신재생에너지의 기술개발이 유럽과 일본 등을 중심으로 활발히 추진 및 실용화되고 있다. 특히, 케이슨 내의 공기실에서 파랑에 의한 수면의 상하운동으로 유도되는 공기흐름을 이용하는 진동수주형 파력발전시스템은 가장 효율적인 파랑에너지흡수장치로 알려져 있고, 따라서 상업화에 가장 근접한 파력발전장치 중에 하나이다. 본 연구에서는 진동수주형 파력발전구조물에서 터빈(Wells터빈)에 직접 작용하는 공기흐름속도를 2차원 및 3차원수치실험으로부터 검토하며, 이 때 형상의 변화에 따른 공기의 최대흐름속도를 추정하여 진동수주형 파력발전구조물의 최적형상을 논의한다. 수치해석에서는 기체와 액체의 혼상동적현상을 동일한 지배방정식으로 해석하는 혼상류(2상류)수치모델에 기초한 3차원수치파동수로를 적용하였다. 이로부터 입사주기대에 따라 최적형상의 크기가 상이하게 나타나는 것을 확인할 수 있었고, 최소의 반사율이 발생하는 주기 대에서 공기흐름이 최대로 된다는 것을 알 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제17권8호
• /
• pp.1-10
• /
• 2012

본 논문에서는 휴대용 초음파 영상의 고성능 및 저전력 처리를 위해 멀티미디어 전용 명령어를 내장한 매니코어의 디자인 공간 탐색 방법론을 제안한다. 이를 위해서 멀티미디어 확장 명령어로 인한 서브워드 병렬처리 방식을 적용한 프로그램과 적용하지 않은 프로그램의 성능을 비교하여 에너지 효율 및 면적효율을 측정하였다. 모의실험 결과, MMX 형태 명령어를 사용한 프로그램은 베이스라인 프로그램 보다 $256{\times}256$ 해상도에서 실행시간은 평균 3.16배, 에너지 효율은 평균 8.13배, 면적 효율은 평균 3.16배의 향상을 보였다. $240{\times}320$ 해상도와 $240{\times}400$ 해상도에서는 각각 실행시간 평균 2.16배, 2.25배, 에너지 효율은 4.04배 4.34배, 면적 효율은 2.16배, 2.25배 향상되었다. 더불어 이러한 MMX 형태 명령어를 포함한 매니코어의 프로세싱 엘리먼트 (Processing Element: PE) 개수 및 메모리 사이즈를 변화시키면서 각 초음파 영상의 해상도별로 최적의 시스템 면적 및 에너지 효율을 보이는 PE 구조를 탐색하였다.