• 소성∙가공
• /
• 제11권3호
• /
• pp.246-254
• /
• 2002

A simple method to derive an optimal pressure curve, characterized by initial pressure, final pressure and pressure path, has been proposed. The initial pressure has been determined from the condition to prevent recoiling phenomenon in the early stage, while the final pressure is from the FE analysis and pressure path is from the punch penetration volume. In order to realize the pressure curve, an open loop control system based on a proportional relief valve has been developed for the renovated CNC hydroforming press. Through the comparison of experiment and analysis, the predicted pressure curve has been verified optimal curve since no defect has been observed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.143-148
• /
• 2001

In this study, to investigate the effect of the generalized performance curve on the performance prediction and to find the optimal ones, a systematic study is performed. For this purpose, we compared the influence of the stage performance curves with experimental data in multi-stage axial compressors. As a result, it is discovered that the optimal generalized performance curves vary according to the number of the stages in compressors. And we found that for a low-stage compressors, Muir's pressure coefficient curve gives the best prediction results at design rotational frequency regardless of the efficiency curve. On the other hand, for high-stage compressors, Stone's pressure coefficient curve gives the optimistic results about the performance prediction at design rotational frequency.

• 대한물리의학회지
• /
• 제9권3호
• /
• pp.301-305
• /
• 2014

PURPOSE: The purpose of this study was to determine the optimal thresholds of serum lipid level related to hypertension according to age in Korean adults. METHODS: In total, 564 adults who visited the health examine center in general hospital were included. The blood pressure and lipid profiles of low density lipoprotein cholesterol(LDL), high density lipoprotein cholesterol (HDL), triglyceride(TG) were measured. Receiver operating characteristic (ROC) curve were used to establish optimal thresholds between blood pressure and lipid profiles. RESULTS: The optimal TG cutoff value were 110.50(mg/dl) in the 18-39 and 81.50(mg/dl) in the 40-59 age group, and optimal cutoff value of LDL were 126.50(mg/dl) in the 40-59 age group and 111.00(mg/dl) in the 60 and over age group. There was a negative correlation between HDL and hypertension, a higher HDL decreased hypertension. The optimal cutoff value of HDL was 49.50(mg/dl) in the 18-39 age group. CONCLUSION: The thresholds of hypertension were lower in LDL and TG with aging. This result indicated that elderly people needs to concern more about their lipid profiles to maintain healthy cardiovascular function.

• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2015

Rifling Force can be described with projectile velocity, gas pressure and rifling angle, etc. Under the same conditions, the character of the rifling angle decisively influences the rifling force. To reduce the harmful effect, locally distinct maximum of rifling force has to be avoided. The optimal design methodology of rifling angle curve had been developed by combined Fourier series and polynomial function. When it was tried newly to design the rifling angle curve, this design trial caused not to produce the lower rifling force than the existing design. Normally, the curve of the rifling angle is designed first, then the rifling force is set according to the rifling angle curve. However during the cause analysis, new design methodology was established to design the ideal rifling force curve before the rifling angle design. With this new methodology, the above optimal design method was analyzed and its limitation was confirmed.

• 대한간호학회지
• /
• 제42권5호
• /
• pp.730-737
• /
• 2012

Purpose: This study was done to identify the time interval to pressure ulcer and to determine the optimal time interval for position change depending on pressure ulcer risk in patients using foam mattress in intensive care units. Methods: The Braden scale score, occurrence of pressure ulcers and position change intervals were assessed with 56 patients admitted to an intensive care unit from April to November, 2011. The time to pressure ulcer occurrence by Braden scale risk group was analyzed with Kaplan-Meier survival analysis and log rank test. Then, the optimal time interval for position change was calculated with ROC curve. Results: The median time to pressure ulcer occurrence was 5 hours at mild or moderate risk, 3.5 hours at high risk and 3 hours at very high risk on the Braden scale. The optimal time interval for position change was 3 hours at mild and moderate risk, 2 hours at high and very high risk of Braden scale. Conclusion: When foam mattresses are used a slight extension of the time interval for position change can be considered for the patients with mild or moderate pressure ulcer risk but not for patients with high or very high pressure ulcer risk by Braden scale.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.998-1005
• /
• 2010

Rifling force has a torsion impulse effect on the gun tube and thus generates undesirable vibration of the gun tube about its bore axis, putting additional stress on the projectile. High rifling force at the muzzle of the gun tube may adversely influence the trajectory of the projectile. And, the service life of rifled gun barrels is known to depend on the rifling force. Rifling force along the path of the projectile in the longitudinal direction of the gun tube can be described with projectile mass, projectile velocity, gas pressure curve and rifling angle. Under the same conditions, the character of the rifling of the gun barrel decisively influences the rifling force curve. To reduce the above mentioned harmful effect, locally distinct maximum of rifling force has to be avoided and maximum rifling force needs to be minimized. The best way to minimize the maximum rifling force is to design a rifling angle function so that the rifling force curve has a near trapezoidal shape. In this paper a new approach to make the optimal rifling force curve is described. The rifling angle determining the rifling force is developed by combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.58-66
• /
• 2016

저온진공건조 조건에 따른 곶감의 건조특성 및 품질적 변화를 분석하였다. 곶감의 건조 특성은 전형적인 항율건조기간과 감율건조기간이 존재함을 확인 할 수 있었다. 진공압력이 높을수록 가열온도가 높을수록 곶감의 당도, 당 함량, 경도 값은 높게 나타났으며 이에 비해 명도 값은 낮게 나타남을 알 수 있었다. 기존 천일 및 열풍건조를 대처할 수 있는 진공건조의 최적 조건은 진공압력이 40~50kPa abs., 가열온도 $30^{\circ}C$, 건조시간은 3~4일 이었다.

• 중환자간호학회지
• /
• 제16권3호
• /
• pp.24-33
• /
• 2023

Purpose : This study aims to establish an optimal cut-off score on the Braden scale for the assessment of pressure injury to detect pressure injury risks among inpatients in a South Korean tertiary hospital. Methods : This retrospective study used electronic medical records, from January to December 2022. A total of 654 patients were included in the study. Of these, 218 inpatients with pressure injuries and 436 without pressure injuries were classified and analyzed using 1:2 Propensity Score Matching (PSM), and the generalized estimating equation was performed using SPSS Version 26 and the R Machlt package program. Results : The cut-off value on the Braden scale for distinguishing pressure injury was 17 points, and the AUC (area under the ROC curve) was 0.531 (0.484-0.579). The sensitivity was 56.6% (45.5-67.7%) and the specificity was 69.7% (66.0-73.4%). With 17 points, the Braden scale cut-off distinguished those who had pressure injuries from those who did not at the time of admission (p < .03). In the pressure injury group, the Braden score on the day of the pressure injury was 14, with significant results in all subcategories except the moisture category. Conclusion : Our findings revealed that a cut-off value of 17 was optimal for predicting the risk of pressure injuries among tertiary hospital inpatients. Future studies should evaluate the optimal cut-off values in different clinical environments. Additionally, it is necessary to conduct multicenter large sample studies to verify the effectiveness of a 17 value in PI risk assessments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.241-243
• /
• 1991

The LB technique is one of the most, powerful fabricating methods of organic ultra thin film, which deposits a monolayer film in molecular level onto the surface of the substrate. In order to fabricate the LB film with optimal condition, we have to deposite monolayer film at optimum depositing pressure. which is dependent on the kind of deposit materials. ${\pi}-A$ curve is one of the most important, criteria to determine the optimum pressure. In this paper, we obtained that the optimum pressure is $20{\sim}50(mN/m)$ from ${\pi}-A$ curve of the stearic acid. In our experiments, it was known that LB ultra thin film is deposited beat at 30(mN/m) by checking the characteristics of LB film.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.157-160
• /
• 1990

A dot matrix type DC Plasma Display Panel was fabricated and it's characteristics was investigated. Paschen curve and I-V curve of various gas mixture was given. Optimal gas mixing ratio, pressure and operating point was determined. The priming effect was observed and discharge delay time was measured with varing applied voltage, priming current, priming distance, duty ratio.