• Ecology and Resilient Infrastructure
• /
• 제9권3호
• /
• pp.131-140
• /
• 2022

기후변화의 영향으로 최근 하천에서 극한 홍수 발생 크기와 빈도가 증가하고 있으며, 따라서 기존의 관측 기록에 의존한 홍수관리 및 하천설계 방식의 한계를 개선하기 위해 자연성 기반의 기술을 접목한 다목적 홍수 관리 기법이 도입되는 추세이다. 이러한 극한 홍수에 대비하기 위한 자연성 기반 해법 중에는 제방을 후퇴하여 홍수터를 확장하고 극한 홍수 발생시에 홍수피해를 저감 시키는 방법이 있다. 이러한 기술을 적용하기 위해서는 홍수피해 저감 효과, 지속가능한 생태환경, 하천 연결성 및 하도의 물리적 구조 개선 등의 다양한 평가항목에 기초한 적합한 입지 선정 방법을 채택하는 것이 우선되어야 한다. 따라서 본 연구에서는 대청댐 상류부터 용담댐 하류 지역내 하천 수변구역을 대상으로 객관성이 확보된 입지 선정 방법을 적용하여 다기능 홍수터 조성 사업을 위한 후보지의 적정성을 판단하였다. 최종 입지 판정 결과, 홍수피해 저감과 수환경 개선을 모두 고려한 최적의 입지 우선순위에 동대제 구간과 저곡제 구간이 포함되는 것으로 나타났다.

• 경영과학
• /
• 제29권2호
• /
• pp.79-90
• /
• 2012

Focusing on the rapid market penetration of smart phones, the importance of LBS (Location Based Service) is drastically increased. However, traditional GPS method has critical weakness caused by limited availability, such as indoor environment. WPS is newly attractive method as a widely applicable positioning method. In WPS, RSSI (Received Signal Strength Indication) data of all Wi-Fi APs (Access Point) are measured and stored into a huge database. The stored RSSI data in database make single radio fingerprint map. By the radio fingerprint map, we can estimate the actual position of target point. The essential factor of radio fingerprint database is data integrity of RSSI. Because of millions of APs in urban area, RSSI measurement data are seriously contaminated. Therefore, we present the unified filtering method for RSSI measurement data. As the results of filtering, we can show the effectiveness of suggested method in practical positioning system of mobile operator.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.600-612
• /
• 2014

In this paper, we consider the problem of spectrum sensing for advanced television systems committee (ATSC) digital television (DTV) signal detection. To exploit the cyclostationarity of the ATSC DTV signals, we employ spectral correlation density (SCD) as the decision statistic and propose an optimal detection algorithm. The major difficulty is in obtaining the probability distribution functions of the SCD. To overcome the difficulty, we probabilistically model the pilot frequency location and employ Gaussian approximation for the SCD distribution. Then, we obtain a practically implementable detection algorithm that outperforms the industry leading systems by 2-3 dB. We also propose various techniques that greatly reduce the system complexity with performance degradation by only a few tenths of decibels. Finally, we show how robust the system is to the estimation errors of the noise power spectral density level and the probability distribution of the pilot frequency location.

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.292-303
• /
• 2003

An efficient mobility management for mobile stations plays an important role in mobile communication network. Two basic operations of mobility management are location registration and paging. A zone-based registration (ZBR) is implemented in most of mobile communication systems and we consider the mobility management scheme that combines a zone-based registration and a selective paging (SP). We propose new analytical model that can reflect on the characteristics of the ZBR based on 2-dimensional random walk mobility model and more efficient paging schemes considering the proposed model. We evaluate the performance of the mobility management scheme with our mobility model to determine the optimal size of location area that will result in the minimum signaling traffic on radio channels. Numerical results are provided to demonstrate that our mobility model is useful to evaluate the ZBR more exactly.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권1호
• /
• pp.61-67
• /
• 1999

There has been an ever increasing interest in mobile robot for home services. However, issues currently being investigated for path planning of the mobile robot is concentrated to solving the problem of finding the optimal path from the initial location to the final location under the given performance index. In this study, we newly present a sweeping algorithm for autonomous mobile robot to cover the whole closed area under the unknown environment. And we verify the validity the validity of the formalized algorithm by computer simulation with the changing environment conditions. In addition to this, we analyse the effect of real system implementation of the proposed algorithm to a experimental miniature mobile robit(Khepera).

• 상하수도학회지
• /
• 제31권6호
• /
• pp.587-597
• /
• 2017

This study aimed to develop a method to optimize residual chlorine concentrations in the process of providing water supply. To this end, this study developed a model capable of optimizing the chlorine input into the clearwell in the purification plant and the optimal installation location of rechlorination facilities, and chlorine input. This study applied genetic algorithms finding the optimal point with appropriate residual chlorine concentrations and deriving a cost-optimal solution. The developed model was applied to SN purification plant supply area. As a result, it was possible to meet the target residual chlorine concentration with the minimum cost. Also, the optimal operation method in target area according to the water temperature and volume of supply was suggested. On the basis of the results, this study derived the most economical operational method of coping with water pollution in the process of providing water supply and satisfying the service level required by consumers in the aspects of cost effectiveness. It is considered possible to appropriately respond to increasing service level required by consumers in the future and to use the study results to establish an operational management plan in a short-term perspective.

• 대한산업공학회지
• /
• 제41권3호
• /
• pp.296-304
• /
• 2015

Vessel Traffic Service (VTS) is the service that provides ships navigating on a sea transportation route with guidance and advice about geographical environment and other attentive information for their safety. In this study we point out that currently, constructing additional VTSs is required to prevent ships from unexpected accident on their navigation. We first select several candidate locations for constructing VTSs, based on the amount of marine transportation and its potential development possibility. Then, we present an optimization model in which the maximum area coverage is achieved by determining new locations of VTS subject to budget limitation. The problem can be modeled as a binary integer program and it provides an optimal solution for new VTS locations to be constructed under the consideration of the currently located VTSs in Korea.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1649-1654
• /
• 2017

GAODV는 목적지의 위치 정보를 이용하여 경로 요청 패킷이 유니캐스트 방식으로 전달되도록 할 수 있지만, GAODV는 목적지의 위치 정보를 알 수 있는 경우에만 활용 가능하다는 제약이 따른다. 본 논문에서는 목적지의 이동에 따른 위치의 불확실성을 완화시킬 수 있는 가상 목적지 도움 GAODV(Virtual Destination Aided GAODV(VDA-GAODV))를 제안한다. 제안하는 VDA-GAODV는, 알려진 목적지 위치를 이용하지 않고, 소스와 목적지를 연결하는 선상에 위치하는 가상의 위치로 경로 요청 패킷이 전달되도록 한다. 경로 요청 패킷 재방송이 목적지가 이동 가능한 영역을 되도록 많이 커버할 수 있도록 하는 최적 가상 위치를 도출한다. VDA-GAODV는, 알려진 목적지 위치를 중심으로 하는 1-hop 통신 영역의 95 % 영역을 경로 요청 패킷 전달 과정에서 커버 가능하며, 이것은 기존 GAODV보다 23 % 향상된 것이다.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.1-9
• /
• 2013

노즐 목 및 출구 면적이 동시에 조절되는 축소-확대 형상의 가변노즐을 수치해석적으로 연구하였다. 최적 팽창 및 후기 연소기 구동시의 최적 노즐 형상 구현을 위해 가변 노즐이 요구된다. 후기연소기 작동유무와 노즐 플랩 위치에 따른 각 조건에 대한 정상상태 계산 및 이동격자 기법을 적용한 과도해석을 수행하였다. 노즐 가변에 의해 내부 유동장의 변화가 유발되었고, 추력이 주기적으로 변화하였다. 탈설계점에서 과대팽창으로 인해 노즐 출구 끝단에서 유동 박리 현상이 발생하였으며, 과소팽창에 의해 충격파가 발생하였다. 이러한 현상은 가변 노즐의 제어를 통해 해결할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1549-1552
• /
• 1997

In this paper, a optimal algorithm that can produce the FOV is proposed in terms of using the Kohonen's Self-Organizing Map(KSOM). A FOV, that stands for "Field Of View", means maximum area where a camera could be wholly seen and influences the total time of inspection of vision system. Therefore, we draw algorithm with a KSOM which aims to map an input space of N-dimensions into a one-or two-dimensional lattice of output layer neurons in order to optimize the number and location of FOV, instead of former sequentila method. Then, we show demonstratin through computer simulation using the real PCB data. PCB data.