• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.144-149
• /
• 2011

A study to determine the optimal jet conditions for maximizing altitude of the sounding rocket is conducted. The behavior of a simplified linear momentum equation including aerodynamic drag is investigated. The analytic solutions are obtained and compared with numerical solutions. It is shown that there are the optimal jet conditions for maximizing altitude of a sounding rocket according to the rocket mass ratio.

• 한국추진공학회지
• /
• 제16권3호
• /
• pp.41-48
• /
• 2012

사운딩로켓의 고도 극대화를 위한 최적의 분사조건을 결정하기 위한 연구를 수행하였다. 공력저항을 고려한 단순화된 1차원 모멘텀 방정식의 거동을 조사하였다. 해석적 해가 존재하는 경우와 분사 유량이 일정한 경우에 대해 계산을 수행하였으며, 해는 수치 해와 비교하였다. 사운딩로켓의 고도를 최대로 하는 최적의 분사조건이 존재하며, 최적조건은 로켓의 질량비의 함수임을 보였다.

• 한국화재소방학회논문지
• /
• 제22권1호
• /
• pp.16-23
• /
• 2008

본 연구에서는 도로터널에서의 화재발생 시 최적의 방재시스템을 구축하기 위하여 실제 터널의 축소모형을 대상으로 제트팬의 위치 및 운전방식에 따른 연기의 유동 및 교란을 가시화함으로서 연기의 전파특성을 고찰하여 제트팬 운전방식의 타당성을 연기의 농도 분포에 의하여 검토하였다. 실험 결과로 화원으로부터 상류방향으로 근접한 제트팬 운전 시에는 연기의 역류를 방지하기위하여 화원과 제트팬의 거리는 최소 50 m이상 이격시켜야 한다. 반면에 화원으로부터 하류방향으로 근접한 제트팬 운전 시에는 모든 조건에 대하여 연기의 편류가 발생하지 않으나 하류방향으로 흐르는 연기의 성층화에 영향을 주기 때문에 사용이 불가능하다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.100-103
• /
• 2011

In the present work, a numerical study of fluid flow and heat transfer on the concave surface with impinging jet has been performed by solving three-dimensional Reynods-averaged Naver-Stokes(RANS) equations. The constant temperature condition was applied to the concave impingement surface. The inclination angle of jet nozzle and the distance between jet nozzles are chosen as design variables under equivalent mass flow rate of working fluid into cooling channel, and area averaged Nusselt number on concave impingement surface is set as the objective function. Thirteen training points are obtained by Latin Hypercube sampling method, and the PEA model is constructed by using the objective function values at the trainging points. And, the sequential quadratic programming is used to search for the optimal paint from the PBA model. Through the optimization, the optimal shape shows improved heat transfer rate as compared to the reference geometry.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.61-67
• /
• 2016

In this study, STAR-CD-based CFD techniques was used to analyze velocity distribution and pressure distribution according to the variation of angels at $45^{\circ}$, $60^{\circ}$ and $90^{\circ}$ a suction pipe when inlet velocity condition is 1 m/s. SIMPLE maritime law used for analytical algorithm and the results of CFD analysis evaluated by particle image velocimetry (PIV). The results of CFD analysis in this study have revealed that the optimal angle of a suction pipe for a jet pump is $90^{\circ}$ and the PIV test has showed the same results. Therefore, it is thought that when CFD is used to analyze the flow characteristics of a jet pump it would be possible to produce optimal designs of its devices.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.26-34
• /
• 2013

사운딩로켓의 고도 극대화를 위한 최적의 분사조건을 결정하기 위한 해석적 접근법을 구축하기 위한 연구를 수행하였다. 로켓의 추력, 중력 및 공력저항을 고려한 1차원 모멘텀 방정식의 거동을 조사하였다. 해석적 해가 존재하는 경우에 대해, 분사 종료 단계에서의 최고 높이를 구할 수 있는 특성 방정식과 최고정점에 도달했을 때의 최고 높이를 구할 수 있는 특성방정식을 구하였으며, 이를 수치적 해와 비교하여 타당성을 검증하였다.

• 설비공학논문집
• /
• 제23권1호
• /
• pp.80-86
• /
• 2011

Vertical open display cabinets are widely used in shopping mall, supermarkets, retail stores. Maintaining the temperature of foods in the display cabinet is vitally important to retailers to ensure optimal food quality and safety. The purpose of this study is to reduce the infiltration of air and heat loss from ambient space to display cabinet. The three-dimensional Computational Fluid Dynamics(CFD) simulation is used for the analysis of air flow patterns and temperature distribution in refrigerated display cabinets. Under several operating conditions which vary both the inner and outer jet velocities in the range from 0.3 to 1.1 m/s, simulations were carried out. This paper presents a performance of display cabinets with single jet and double jet. The energy consumption due to thermal entrainment ratio is plotted with varying Re. It was found that the double jet system is better than single jet system in terms of temperature distribution and energy saving.

• 한국분무공학회지
• /
• 제25권2호
• /
• pp.81-88
• /
• 2020

Electrospray is used in various industries because it can produce continuous and uniform droplets. However, it is difficult to find optimal spraying condition due to lack of data in various conditions. In this study, various conditions were divided into electric parameters and fluid property. The electric parameters set Nozzle to Substrate(NTS), nozzle diameters and the fluid property set viscosity and conductivity as conditions. In this study, it observes spray patterns, Sauter Mean Diameter(SMD) according to conditions. As a result, fluid properties had a greater effect on the cone-Jet mode than on the nozzle diameter, NTS, and flowrate. All of solutions have Stable cone-jet mode at voltage of 8.5 kV, NTS of 20 mm and nozzle diameter of 0.2 mm. SMD has 27% different depending on viscosity and conductivity. The increased flowrate and viscosity are rising break-up length and thickening jet also jet is thinned by increased conductivity. Experiments have confirmed that the jet is thickened by increased flowrate and viscosity, and that the jet is thinned by conductivity.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.910-917
• /
• 2020

In fire suppression, continuous delivery of water or foam to the fire source is essential. The present study concerns fire suppression in a ship under sea condition, by introducing reinforcement learning technique to aiming of fire extinguishing nozzle, which works in a ship compartment with six degrees of freedom movement by irregular waves. The physical modeling of the water jet and compartment motion was provided using Unity 3D engine. In the reinforcement learning, the change of the nozzle angle during the scenario was set as the action, while the reward is proportional to the ratio of the water particle delivered to the fire source area. The optimal control of nozzle aiming for continuous delivery of water jet could be derived. Various algorithms of reinforcement learning were tested to select the optimal one, the proximal policy optimization.

• 대한환경공학회지
• /
• 제28권9호
• /
• pp.949-954
• /
• 2006

본 연구는 Water jet 플라즈마 반응기를 개발하고 탄화수소 연료의 개질을 통한 합성가스 생산의 최적 조건을 연구하였다. 연료는 프로판을 사용하였다. 그리고 수표면에 아크 방전을 가하여 플라즈마를 발생하였다. 수표면의 방전은 short-wave, UV radiation 등을 발생시키는 이점을 가지고 있어 물의 생물학적 기리고 화학적 처리에 이용할 수 있다. 전력, Water jet의 유량, 전극간격 뿐만 아니라 처리시간에 따른 영향에 대해 연구하였다. 변수별 연구는 전력을 $0.18{\sim}0.74$ kW, Water jet의 유량을 $38.4{\sim}65.6$ mL/min, 전극간격을 $5{\sim}15$ mm 그리고 처리시간을 $2{\sim}20$ min에 따라 수행하였다. 상기 변수별 연구에서 0.4 kW, 53.9 mL/min, 10 mm and 20 min일 때 수소는 최대 61.6%를 나타냈으며 이 때 중간생성물의 농도는 6.1% 그리고 프로판 전환율은 99.8%를 나타냈다.