• Title/Summary/Keyword: Optimal Control Technology

Search Result 1,631, Processing Time 0.048 seconds

Effects of the Energy Level of the Finisher Diet on Growth Efficiency and Carcass Traits of 'High'-Market Weight Pigs (비육후기 사료의 에너지 수준이 '고체중' 출하돈의 성장효율 및 도체특성에 미치는 영향)

  • Lee, C.Y.;Kim, M.H.;Ha, D.M.;Park, J.W.;Oh, G.Y.;Lee, J.R.;Ha, Y.J.;Park, B.C.
    • Journal of Animal Science and Technology
    • /
    • v.49 no.4
    • /
    • pp.471-480
    • /
    • 2007
  • The aim of the present study was to determine the effects of a low-energy finisher diet on feed and growth efficiencies and carcass traits of ‘high’-market weight (MW) finishing pigs and thereby to extrapolate optimal dietary energy level for the high-MW swine. A total of 160 (Yorkshire × Landrace) × Duroc-crossbred finishing gilts and barrows weighing approximately 90 kg were fed a low-energy (3,200 kcal DE/kg) diet (LE) or control (3,400 kcal) diet (CON) ad libitum in 16 pens up to 135- and 125-kg live weights, respectively, at which the animals were slaughtered and their carcasses were analyzed [2 (sex) × 2 (diet) factorial experimental design]. Average daily gain, average daily feed intake and feed efficiency did not differ between the two sex or diet groups. Backfat thickness was less (P<0.05) in LE (22.4 mm) than in CON group (24.3 mm) in gilts, but not in barrows (24.4 ± 0.4 mm). The percentage of C- & D-grade carcasses was over 90% because of the ‘over-weight’ problem in gilts, whereas in barrows, percentages of A plus B grades and C plus D grades were 79% and 21%, respectively. The yield percentage of each trimmed primal cut per total trimmed cuts (w/w) did not differ between the two sex or diet groups. Physicochemical characteristics of longissimus muscle including color (lightness and redness), pH, drip loss and chemical composition, which overally were within the range of normal carcass, also did not differ between the two sex or diet groups. In conclusion, both LE and CON are judged to be adequate for the high-MW swine during the latter finishing period. If fat deposition of a given herd of high-MW pigs needs to be suppressed by a dietary treatment, the energy content of the diet will have to be reduced to a level lower than 3,200 kcal DE/kg.

Personalized Recommendation System for IPTV using Ontology and K-medoids (IPTV환경에서 온톨로지와 k-medoids기법을 이용한 개인화 시스템)

  • Yun, Byeong-Dae;Kim, Jong-Woo;Cho, Yong-Seok;Kang, Sang-Gil
    • Journal of Intelligence and Information Systems
    • /
    • v.16 no.3
    • /
    • pp.147-161
    • /
    • 2010
  • As broadcasting and communication are converged recently, communication is jointed to TV. TV viewing has brought about many changes. The IPTV (Internet Protocol Television) provides information service, movie contents, broadcast, etc. through internet with live programs + VOD (Video on demand) jointed. Using communication network, it becomes an issue of new business. In addition, new technical issues have been created by imaging technology for the service, networking technology without video cuts, security technologies to protect copyright, etc. Through this IPTV network, users can watch their desired programs when they want. However, IPTV has difficulties in search approach, menu approach, or finding programs. Menu approach spends a lot of time in approaching programs desired. Search approach can't be found when title, genre, name of actors, etc. are not known. In addition, inserting letters through remote control have problems. However, the bigger problem is that many times users are not usually ware of the services they use. Thus, to resolve difficulties when selecting VOD service in IPTV, a personalized service is recommended, which enhance users' satisfaction and use your time, efficiently. This paper provides appropriate programs which are fit to individuals not to save time in order to solve IPTV's shortcomings through filtering and recommendation-related system. The proposed recommendation system collects TV program information, the user's preferred program genres and detailed genre, channel, watching program, and information on viewing time based on individual records of watching IPTV. To look for these kinds of similarities, similarities can be compared by using ontology for TV programs. The reason to use these is because the distance of program can be measured by the similarity comparison. TV program ontology we are using is one extracted from TV-Anytime metadata which represents semantic nature. Also, ontology expresses the contents and features in figures. Through world net, vocabulary similarity is determined. All the words described on the programs are expanded into upper and lower classes for word similarity decision. The average of described key words was measured. The criterion of distance calculated ties similar programs through K-medoids dividing method. K-medoids dividing method is a dividing way to divide classified groups into ones with similar characteristics. This K-medoids method sets K-unit representative objects. Here, distance from representative object sets temporary distance and colonize it. Through algorithm, when the initial n-unit objects are tried to be divided into K-units. The optimal object must be found through repeated trials after selecting representative object temporarily. Through this course, similar programs must be colonized. Selecting programs through group analysis, weight should be given to the recommendation. The way to provide weight with recommendation is as the follows. When each group recommends programs, similar programs near representative objects will be recommended to users. The formula to calculate the distance is same as measure similar distance. It will be a basic figure which determines the rankings of recommended programs. Weight is used to calculate the number of watching lists. As the more programs are, the higher weight will be loaded. This is defined as cluster weight. Through this, sub-TV programs which are representative of the groups must be selected. The final TV programs ranks must be determined. However, the group-representative TV programs include errors. Therefore, weights must be added to TV program viewing preference. They must determine the finalranks.Based on this, our customers prefer proposed to recommend contents. So, based on the proposed method this paper suggested, experiment was carried out in controlled environment. Through experiment, the superiority of the proposed method is shown, compared to existing ways.

Production and physicochemical properties of black bean yogurt made with lactic acid bacteria isolated from vinegar and kimchi (식초와 김치 유래 젖산균으로 제조한 서리태 발효우유 제조 및 물리화학적 품질 특성 연구)

  • Jeong, Seong-Yeop;Kang, Suna;Lee, Na Ra;Ryu, Myeong Seon;Wu, Xuangao;Kim, Da Sol;Park, Sunmin
    • Korean Journal of Food Science and Technology
    • /
    • v.50 no.1
    • /
    • pp.76-82
    • /
    • 2018
  • This study evaluated the physicochemical properties of a novel black bean milk yogurt made by lactic acid producing bacteria isolated from vinegar (Bacillus acidiproducens, BA) and kimchi (Lactobacillus plantarum, LP). Commercially available Lactobacilli mixture for yogurt (YF) were regarded as control bacteria. To investigate optimal conditions to make black bean yogurt, different types of bacteria (BA and LP) and dilution ratios of black bean milk and water (1:1, 1:1.5, and 1:2) were used. Titratable acidity and pH were affected by these dilution ratios, but not by the different types of Lactobacilli used. Titratable acidity and pH were lowest in the 1:1 diluted sample. The visible cell count, sugar content, and viscosity were significantly higher in the sample containing the black bean milk: water ratio of 1:1 than the rest of the samples. In the sensory test, black bean yogurt made with BA showed a higher overall acceptability score, similar to yogurt made with YF. In conclusion, black bean yogurt made by fermentation with BA and with 1:1 black bean milk:water dilution ratio was better than ones made with LP and at other dilution ratios.

Quality Changes as Affected by Storage Temperature and Polyamide Film Packaging in Paprika (Capsicum annuum L.) (파프리카 저장 온도 변화와 폴리아미드 필름 포장 적용에 따른 품질 변화)

  • Erdene, Byambaa Bayar;Lee, Jung-Soo;Park, Me Hea;Choi, Ji Won;Eum, Hyang Lan;Malka, Siva Kumar;Yun, Yeoeun;Kim, Chae-Hee;Kim, Ho Cheol;Lee, Jinwook;Park, Ki Young;Bae, Jong Hyang;Lee, YounSuk;Jeong, Cheon Soon;Park, Jong-Suk
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.28 no.2
    • /
    • pp.115-125
    • /
    • 2022
  • The purpose of this study was to examine the effect of packaging on quality maintenance of paprika (Capsicum annuum L. cv. Nagano RZ) stored at three different temperatures. In Korea, paprika is stored and distributed under ambient conditions. To ensure the freshness maintenance, determining optimal storage temperature is necessary. Paprika were unpacked (control) or packed with polyamide film and stored at 5℃, 10℃ and 20℃ for 35 days. Quality characteristics such as weight loss and appearance were examined. Paprika packed with polyamide film showed less quality changes compared to unpacked paprika under all the storage temperatures. The commercial properties tended to decrease rapidly during storage at 20℃ regardless of packing. The degree of weight loss was significantly lower in packed paprika compared to unpacked paprika. It was found that soluble solids, pigments, hardness, etc. were complexly affected by storage temperature and film packaging. For paprika, the storage temperature of 5℃ or 10℃ was effective in maintaining freshness; paprika packed in polyamide film packing maintained greater freshness than unpacked paprika. Our results showed that, packaging is required to preserve the freshness and to improve the marketability of paprika in the domestic market. It seems that it is necessary to continuously search for an effective packaging method.

SANET-CC : Zone IP Allocation Protocol for Offshore Networks (SANET-CC : 해상 네트워크를 위한 구역 IP 할당 프로토콜)

  • Bae, Kyoung Yul;Cho, Moon Ki
    • Journal of Intelligence and Information Systems
    • /
    • v.26 no.4
    • /
    • pp.87-109
    • /
    • 2020
  • Currently, thanks to the major stride made in developing wired and wireless communication technology, a variety of IT services are available on land. This trend is leading to an increasing demand for IT services to vessels on the water as well. And it is expected that the request for various IT services such as two-way digital data transmission, Web, APP, etc. is on the rise to the extent that they are available on land. However, while a high-speed information communication network is easily accessible on land because it is based upon a fixed infrastructure like an AP and a base station, it is not the case on the water. As a result, a radio communication network-based voice communication service is usually used at sea. To solve this problem, an additional frequency for digital data exchange was allocated, and a ship ad-hoc network (SANET) was proposed that can be utilized by using this frequency. Instead of satellite communication that costs a lot in installation and usage, SANET was developed to provide various IT services to ships based on IP in the sea. Connectivity between land base stations and ships is important in the SANET. To have this connection, a ship must be a member of the network with its IP address assigned. This paper proposes a SANET-CC protocol that allows ships to be assigned their own IP address. SANET-CC propagates several non-overlapping IP addresses through the entire network from land base stations to ships in the form of the tree. Ships allocate their own IP addresses through the exchange of simple requests and response messages with land base stations or M-ships that can allocate IP addresses. Therefore, SANET-CC can eliminate the IP collision prevention (Duplicate Address Detection) process and the process of network separation or integration caused by the movement of the ship. Various simulations were performed to verify the applicability of this protocol to SANET. The outcome of such simulations shows us the following. First, using SANET-CC, about 91% of the ships in the network were able to receive IP addresses under any circumstances. It is 6% higher than the existing studies. And it suggests that if variables are adjusted to each port's environment, it may show further improved results. Second, this work shows us that it takes all vessels an average of 10 seconds to receive IP addresses regardless of conditions. It represents a 50% decrease in time compared to the average of 20 seconds in the previous study. Also Besides, taking it into account that when existing studies were on 50 to 200 vessels, this study on 100 to 400 vessels, the efficiency can be much higher. Third, existing studies have not been able to derive optimal values according to variables. This is because it does not have a consistent pattern depending on the variable. This means that optimal variables values cannot be set for each port under diverse environments. This paper, however, shows us that the result values from the variables exhibit a consistent pattern. This is significant in that it can be applied to each port by adjusting the variable values. It was also confirmed that regardless of the number of ships, the IP allocation ratio was the most efficient at about 96 percent if the waiting time after the IP request was 75ms, and that the tree structure could maintain a stable network configuration when the number of IPs was over 30000. Fourth, this study can be used to design a network for supporting intelligent maritime control systems and services offshore, instead of satellite communication. And if LTE-M is set up, it is possible to use it for various intelligent services.

Growth and Physiological Characteristics of Five Common Foliage Plant Species Grown under the Influence of Static Magnetic Field (정자기장 처리에 따른 실내 관엽식물의 생육 및 생리적 특성 변화)

  • Lee, Seong Han;Woo, Su Young;Kwak, Myung Ja
    • Horticultural Science & Technology
    • /
    • v.30 no.5
    • /
    • pp.484-492
    • /
    • 2012
  • The present study aimed to investigate the effect of static magnetic field (SMF) on the growth and physiological characteristics of common indoor plant species. Five foliage plant species, Spathiphyllum spp., Ardisia pusilla DC., Syngonium podophyllum, Peperomia pereskiifolia, and Pilea cadierei were potted into plastic pot equipped with round type anisotropic sintered NdFeB permanent magnet inside the pot. The surface magnetic flux density of each magnet was 3,500 G. After 6 months of growth period, the biomass accumulations of Spathiphyllum, A. pusilla, and P. cadierei under SMF were statistically higher than those of controls. Tissue water content also increased under the influence of SMF in most species. The photosynthetic rate of Spathiphyllum under SMF significantly increased but other species showed no significant difference compared with control. Although there was no significant increase in the photosynthetic rates of A. pusilla, and P. cadierei, they showed remarkable increase in total fresh weight under SMF. This suggests that the demand of assimilates for normal metabolism could be decreased under magnetic influence and thereby biomass accumulation could be more favored. But this is not always true for all plant species because P. pereskiifolia in this experiment, showed no changes in both photosynthetic rate and biomass accumulation. Leaf nitrogen and chlorophyll contents were enhanced significantly in most plant species under influence of SMF. Chlorophyll a/b ratio also increased by SMF. Although there might be a limitation depending on plant species, these results suggest that long-term exposure to SMF might allow plant to have an enhanced acclimation capacity against environmental fluctuations and optimal application of SMF could increase the practical use of indoor plants such as an attempt to improve indoor air quality.

Effect of Ethylene Glycol(EG) and Propylene Glycol(PG) on the Viability of Frozen-thawed Primordial Germ Cells(PGCs) on Korean Native Chicken(Ogye) by Vitrification (한국재래닭(오계)의 유리화 동결 시 생존율에 미치는 Ethylene Glycol(EG)과 Propylene Glycol(PG)의 영향)

  • Kim, Hyun;Kim, Dong Hun;Han, Jae Yong;Choi, Sung Bok;Ko, Yeoung Gyu;Do, Yoon Jung;Seong, Hwan-Hoo;Kim, Sung Woo
    • Korean Journal of Poultry Science
    • /
    • v.40 no.3
    • /
    • pp.197-205
    • /
    • 2013
  • This study established a method for preserving chicken primordial germ cells (PGCs) that enables long-term storage in liquid nitrogen ($LN_2$) for preservation of the species. The purpose of this study was to compare the effects of Ethylene Glycol (EG) and Propylene Glycol (PG) on viability of cryopreserved PGCs with vitrification in Korean Native Chicken (Ogye), and to fine should be find or to the optimal protocol for PGCs freezing. One of the important components of cryopreservation process is cryopreservation medium that plays a vital role in preventing cellular injury during freeze-thawing. Cryoprotective agents have been known to improve cell viability after freeze-thawing. PGCs obtained from the germinal gonade of 5.5~6 day (stage 28) chick embryos, using the MACS method were suspended in a freezing medium containing a freezing and protecting agents. Gonads were harvested from stage 28 chick embryos and pooled in groups of 10E embryos, contributing gonads to the cell suspension. The gonadal cells, including PGCs, were then frozen in 1 of the following cryoprotectant treatments: 2.5% EG, 5% EG, 10% EG, 2.5% PG, 5% PG, 10% PG, and 0% cryoprotectant as a control. Effects of exposure to vitrification solution and vitrification, with different concentrations of the cryoprotectant solution, were examined. After freezing and thawing, survival rates of the frozen-thawed PGCs from the 0, 2.5, 5, 10 and 15% EG plus FBS treatment were 44.24%, 64.51%, 85.63%, 80.51% and 73.52% (p<0.05), respectively. The viability of PGCs after freeze-thawing was significantly higher for 10% EG plus FBS treatment than for 10% PG + FBS treatment (p<0.05)(85.63% vs 66.81%). Therefore, these systems may contribute in the improvement of cryopreservation for a scarce species in birds preservation. This study established a method for preserving chicken PGC that enables systematic storage and labeling of cryopreserved PGCs in liquid N at a germplasm repository and ease of entry into a database. In the future, the importance for this new technology is that poultry lines can be conserved while work is being conducted on improving the production of germline chimeras.

Soil Management Techniques for High Quality Cucumber Cultivation in Plastic Film Greenhouse (고품질 시설하우스 오이재배를 위한 토양 종합관리 기술)

  • Hyun, Byung-Keun;Jung, Sug-Jae;Jung, Yeon-Jae;Lee, Ju-Young;Lee, Jae-Kook;Jang, Byoung-Choon;Chio, Nag-Doo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.44 no.5
    • /
    • pp.717-721
    • /
    • 2011
  • In case of plastic film greenhouses cultivating fresh vegetables on paddy soil, soil characteristics must be considered as more important factor than any other factors. Generally after the four years of cultivation, soils tend to increase electrical conductivity value, nutrient unbalance and soil pests. As a result, degradation of agricultural products occurred, therefore it is necessary to improve soil conditions. In this study, yield and economic cost of cucumber were analyzed. The best soil conditions for cucumber cultivation were alluvial or valley in soil topology, moderately or poorly drainage in soil drainage classes, coarse loamy soil in texture. In addition, rich-sunlight and-deep groundwater would be proper for the cucumber cultivation. Good environmental managements of plastic film greenhouse were as follows. The temperature needed to be adjusted three times. The optimal daytime temperature could be $22{\sim}28^{\circ}C$, the one from 12 until night could be $14{\sim}15^{\circ}C$, and the temperature from 24 to sunrise could be $10{\sim}12^{\circ}C$. During plant growth period, soil moisture content was as low as 10~15%, and it needed to be maintained as 15~20% during reproductive growth period. To control pests, catch crop cultivation and solar treatment were carried out, after those EC was reduced and the root-knot nematode was controled too. Cucumber yield from the plot with improved soil managements increased to $158.4Mg\;ha^{-1}$, but plot with successive cropping injury yielded $140.3Mg\;ha^{-1}$. The income from the plot with improved soil managements was 215,676 thousand won $ha^{-1}$, the plot with successive cropping injury was 131,649 thousand won $ha^{-1}$. Income rate of each plot was 51.8% and 38.4%, respectively.

Evaluation of Rapeseed Seedling Quality According to Varieties and Seedling Ages for Spring Cultivation Transplanting (유채 봄 재배 기계이식을 위한 품종별 육묘 일수에 따른 묘소질 평가)

  • An, Da-Hee;Cha, Young-Lok;Kim, Kwang-Soo;Shin, Woon-Chul;Lee, Ji-Eun
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.66 no.3
    • /
    • pp.256-264
    • /
    • 2021
  • Rapeseed (Brassica napus L.) is generally sown in late autumn and harvested in early summer in Korea, however, spring cultivation has also been attempted in some areas because frequent climate changes induce reducing productivity. Therefore, there is a need for a transplanting technology that is relatively easy to control of cropping season according to changes in cultivation conditions. In this study, to find out the optimal characteristics of seedlings for machine transplanting of spring cultivation, seedling morphological characteristics were investigated according to the seedling age of three varieties for 2020 and 2021. The hypocotyl length was less than 2 cm in both years and the 40-day-old seedling was the shortest among all seedling ages. The number and size of leaf were increased with longer seedling age in both years. To evaluate seedling quality, total seedling length, seedling weight, and impact resistance were measured before transplanting. Total seedling length was the longest in 40-day-old seedlings and the shortest in 25-day-old seedlings in both years. In the case of seedling weight, no significant differences were observed depending on the seedling age and the impact resistance increased with increasing seedling age. Finally, 'Jungmo7001', 'Naehan', and 'Tamla' showed a high transplanting rate in seedlings grown for more than 30 days, 35 days, and 40 days, respectively, in the field using a general transplanter. These results suggest that the proper seedling age for transplanting is limited depending on the rapeseed varieties. The suitable seedling cultivation method can be selected for different cultivation environments.

The Concentration of Economic Power in Korea (경제력집중(經濟力集中) : 기본시각(基本視角)과 정책방향(政策方向))

  • Lee, Kyu-uck
    • KDI Journal of Economic Policy
    • /
    • v.12 no.1
    • /
    • pp.31-68
    • /
    • 1990
  • The concentration of economic power takes the form of one or a few firms controlling a substantial portion of the economic resources and means in a certain economic area. At the same time, to the extent that these firms are owned by a few individuals, resource allocation can be manipulated by them rather than by the impersonal market mechanism. This will impair allocative efficiency, run counter to a decentralized market system and hamper the equitable distribution of wealth. Viewed from the historical evolution of Western capitalism in general, the concentration of economic power is a paradox in that it is a product of the free market system itself. The economic principle of natural discrimination works so that a few big firms preempt scarce resources and market opportunities. Prominent historical examples include trusts in America, Konzern in Germany and Zaibatsu in Japan in the early twentieth century. In other words, the concentration of economic power is the outcome as well as the antithesis of free competition. As long as judgment of the economic system at large depends upon the value systems of individuals, therefore, the issue of how to evaluate the concentration of economic power will inevitably be tinged with ideology. We have witnessed several different approaches to this problem such as communism, fascism and revised capitalism, and the last one seems to be the only surviving alternative. The concentration of economic power in Korea can be summarily represented by the "jaebol," namely, the conglomerate business group, the majority of whose member firms are monopolistic or oligopolistic in their respective markets and are owned by particular individuals. The jaebol has many dimensions in its size, but to sketch its magnitude, the share of the jaebol in the manufacturing sector reached 37.3% in shipment and 17.6% in employment as of 1989. The concentration of economic power can be ascribed to a number of causes. In the early stages of economic development, when the market system is immature, entrepreneurship must fill the gap inherent in the market in addition to performing its customary managerial function. Entrepreneurship of this sort is a scarce resource and becomes even more valuable as the target rate of economic growth gets higher. Entrepreneurship can neither be readily obtained in the market nor exhausted despite repeated use. Because of these peculiarities, economic power is bound to be concentrated in the hands of a few entrepreneurs and their business groups. It goes without saying, however, that the issue of whether the full exercise of money-making entrepreneurship is compatible with social mores is a different matter entirely. The rapidity of the concentration of economic power can also be traced to the diversification of business groups. The transplantation of advanced technology oriented toward mass production tends to saturate the small domestic market quite early and allows a firm to expand into new markets by making use of excess capacity and of monopoly profits. One of the reasons why the jaebol issue has become so acute in Korea lies in the nature of the government-business relationship. The Korean government has set economic development as its foremost national goal and, since then, has intervened profoundly in the private sector. Since most strategic industries promoted by the government required a huge capacity in technology, capital and manpower, big firms were favored over smaller firms, and the benefits of industrial policy naturally accrued to large business groups. The concentration of economic power which occured along the way was, therefore, not necessarily a product of the market system. At the same time, the concentration of ownership in business groups has been left largely intact as they have customarily met capital requirements by means of debt. The real advantage enjoyed by large business groups lies in synergy due to multiplant and multiproduct production. Even these effects, however, cannot always be considered socially optimal, as they offer disadvantages to other independent firms-for example, by foreclosing their markets. Moreover their fictitious or artificial advantages only aggravate the popular perception that most business groups have accumulated their wealth at the expense of the general public and under the behest of the government. Since Korea stands now at the threshold of establishing a full-fledged market economy along with political democracy, the phenomenon called the concentration of economic power must be correctly understood and the roles of business groups must be accordingly redefined. In doing so, we would do better to take a closer look at Japan which has experienced a demise of family-controlled Zaibatsu and a success with business groups(Kigyoshudan) whose ownership is dispersed among many firms and ultimately among the general public. The Japanese case cannot be an ideal model, but at least it gives us a good point of departure in that the issue of ownership is at the heart of the matter. In setting the basic direction of public policy aimed at controlling the concentration of economic power, one must harmonize efficiency and equity. Firm size in itself is not a problem, if it is dictated by efficiency considerations and if the firm behaves competitively in the market. As long as entrepreneurship is required for continuous economic growth and there is a discrepancy in entrepreneurial capacity among individuals, a concentration of economic power is bound to take place to some degree. Hence, the most effective way of reducing the inefficiency of business groups may be to impose competitive pressure on their activities. Concurrently, unless the concentration of ownership in business groups is scaled down, the seed of social discontent will still remain. Nevertheless, the dispersion of ownership requires a number of preconditions and, consequently, we must make consistent, long-term efforts on many fronts. We can suggest a long list of policy measures specifically designed to control the concentration of economic power. Whatever the policy may be, however, its intended effects will not be fully realized unless business groups abide by the moral code expected of socially responsible entrepreneurs. This is especially true, since the root of the problem of the excessive concentration of economic power lies outside the issue of efficiency, in problems concerning distribution, equity, and social justice.

  • PDF