• Korean Journal of Weed Science
• /
• v.15 no.1
• /
• pp.85-98
• /
• 1995

Six malformin B's produced by Aspergillus niger van Tiegh. were separated by HPLC. Their structures determined by the methods of amino acid analyses, mass spectrometry, and two-dimensional NMR were revealed as cyclic pentapeptides structurally related to malformin $A_1$. Both the NMR and MS/MS data suggest that the respective structures of separated malformin B's were as follows; cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-allo-Ile for $B_{1a}$, cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Leu for $B_{1b}$, cyclo-D-Cys-D-Cys-L-Val-D-Val-L-Leu for $B_2$, cyclo-D-Cys-D-Cys-L-Val-D-Ile-L-Leu for $B_3$, cyclo-D-Cys-D-Cys-L-Val-D-Ile-L-Ile for $B_4$, and cyclo-D-Cys-D-Cys-L-Val-D-Val-L-Ile for $B_5$. Among the malformin B's, the structure of $B_{1b}$ was the same as that of malformin $A_3$ or C. All the malformin B's showed physiological activities in the two assay systems using corn(Zea mays L.) roots and mung bean(Phaseolus aureus Roxb.) hypercotyl segments. The malformin B's with molecular weight 529 were more effective for inducing corn root curvature than those with molecular weight 515. The difference in molecular weight of malformin B's, i.e., the retention time on HPLC, results in the polarity change of the whole malformin molecule which affects the revealation of the malformin activities. In addition, the disulfide form of the malformin B's gives the rigidity of the molecule, whereas the combination of the fourth and the fifth amino acid residues provides the optimal three-dimensional configuration to the malformin receptor of plants. Presumably, these two factors are appeared to be essential for the greatest physiological activity of malformin B's. malformin $B_{1a}$ caused the corn root curvature by 90% at a concentration of $0.25{\mu}M$. However, such differential activities with molecular weight of 529 or 515 of malformin B's were not found in the mung bean hypercotyl segment test. Maximum stimulation of mung bean hypercotyl growth was observed at $0.1{\mu}M$ concentration of malformin B's. The growth of the segments treated with $B_5$ was 154% greater than that of the control.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.258-264
• /
• 1998

This study was conducted to establish mass propagation system from seeds of Lavandula angustiolia Mill. Only 4% of dry seeds were germinated when they were incubated in $4^{\circ}C$. Germination rate of stratified seeds for 9 weeks was 15% higher in light than darkness. Soaking with 1000mg/l of $GA_3$ was helpful to overcome the effect of darkness. The optimal temperature for germination was $25^{\circ}C$ for the seeds that were treated with$GA_3$, solution. For the improvement of germination rates, pretreatment of $GA_3$ at 500-2000mg/l showed about 75% of germination, and in the combination treatment of $GA_3$, and BA, germination rate increased by about 10% in the treatment of 1000mg/l $GA_3+10mg/l$ BA compared with the 1000mg/l $GA_3$ treatment. Cold stratification treatment was very effective for seed germination, and over 70% of seeds were germinated when they were incubated in $4^{\circ}C$ for 9-12 weeks. In addition, there was synergic effect on the seed germination subject to stratification and 1000mg/l $GA_3$, treatment for 6 months. In the mixture of vermiculite: peatmoss (1 : 1, v/v), emergence rate was 6.7% in control and 65% in 1000mg/l $GA_3$ treatment, respectively.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.190-201
• /
• 1980

This experiment was designed to optimize the process of manufacturing the soybean cheeses and to elucidate the chemical changes during ripening when the chemical changes during ripening when the milk components and enzyme preparations were added to the raw materials. Conditions for extracting soybean protein such as temperature, duration and amount of water added were determined; various coagulaters were compared by checking the curd texture and yield; starters from S. thermophilus, S. lactis MLB and S. cremoris EB-9 were tested as single- or multi-stain combinations; and the effects of skim milk and/or rennins-both microbial and calf origin-addition upon the process of manufacturing and ripening were studied. The results obtained were as follows. 1. optimal conditions for soybean extraction were found to be: temperature $100^{\circ}C$, duration 10 minutes, and amount of water added 9-fold, as considered the extraction rate of solids and proteins, and curd yield. 2. Sodium gluconate was the most effective among the coagulators tested, and 5% of single-strain starter from S. thermophilus was appered to be adequate inoculum for curd formation. 3. The effects of skim milk and/or rennins addition on the process of manufacturing and ripening of soybean cheeses were: 1) The addition of rennins resulted in fast formation of curd, especially with skim milk it was so. And Hansen rennet extracts brought better results in curd formation than Meito rennet extracts did. 2) No significant effect was observed on the changes in moisture content during ripening, however the levels of moisture contents in the products were higher in case of using Meito rennet extracts. 3) Effect on pH changes during ripening was also not significant in general, while levels of pH were decrease markedly during manufacturing and the initial stage of ripening. 4) The levels of bacterial counts were much higher in case of skim milk addition throughtout the ripening period. In general the numbers were reached to approximately $10^8cells/g$ during manufacturing, then decreased gradually to below $10^2cells/g$ in 8 weeks of ripening. 5) The addition of skim milk and/or rennin resulted in higher ripening index, and skim milk plus Meito rennet extracts was appeared to be best combination for the ripening index.

• Advances in pediatric surgery
• /
• v.9 no.1
• /
• pp.45-51
• /
• 2003

A nationwide survey on choledochal cyst was undertaken among 39 members of the Korean Association of Pediatric Surgeons. The members were required to complete a questionnaire and the case registration form for each patient during the five year period of 1997 to 2001. Three hundred and forty eight patients were registered from 32 institutions. The average number of patients per surgeon was one to two every year. The male to female ratio was 1:3.4. The age of patients on diagnosis was $49.0{\pm}44.4$ months. The geographic distribution was 34.8% in Seoul and Kyoungki-do, 33.3% in Kyoungsang-do, 17.9% in Cholla-do, and 8.5% in Choongchung-do, in order of frequency. The three common clinical presentations were abdominal pain (63.8%), vomiting (35.3%), and jaundice (29.1%). Only seven patients (2%) presented with classic triad, and 25 patients were diagnosed by antenatal ultrasonographic examination. According to the Todani Classification, 238 patients (7l.3%) were type 1, 3 (0.9%) type 11, and 93 (27.8%) type IV. At the time of the operation, three important associated conditions were choledocholithiasis in 45 patients (15.1%), liver fibrosis (Grade 1-4) in 35, and previous operative procedure for biliary diseases in 10. Associated anomalies were observed in 13 patients (3.8%). Three hundred thirty nine (98.8%) of 343 lesions were treated by Cyst excision and Roux-Y hepaticoiejunostomy. One hundred seventy-six patients had an anomalous arrangement of the pancreatobiliary ductal system (APBD): APBD was not in 92 patients, biliary duct joined to the pancreatic duct in 51, and pancreatic duct joined to the biliary duct in 26. There were 8.5% early, and 7.7% late phase operative complications. The major complications were bleeding, anastomotic leakage, and acute pancreatitis. The combination of acute abdomen and choledochal cyst may suggest spontaneous rupture. Because of the development of late intrahepatic bile duct stones, long term follow up after cyst excision and hepaticojejunostomy is required. The optimal time of surgical intervention should also be considered in the situation of routine use of antenatal ultrasonographic examination. This is the first review of the choledochal cyst in Korea and provides baseline data for future comparisons.

• The Journal of Natural Sciences
• /
• v.4
• /
• pp.143-159
• /
• 1991

In order to investigate the micropropagation of Pelargonium, 2 cultivars of P. peltatum 'Pouletta' and P. zonale 'Pinto Red' were cultured in vitro on the MS basal medium supplemented with various concentrations of growth regulators. It attempted to study the induction of callus and the differentiation of organs from leaf disc, petiole segments, stem segments. hypocotyle segments and flower stalk segments. The results are summarized as follows; A. As for the initiation of callus, stem explant was proved to be the most suitable one among various explants of P. zonale 'Pinto Red'. The medium was supplemented with 1.0mg/1 BAP and 1.0mg/1 NAA. As NAA concentration increased, callus formation was enhanced, but higher concentration of NAA inhibited callus fromation. Leaf and hypocotyle explants showed less callus formation than stem and petiole explants. B. In P. zonale 'Pinto Red' petiole culture, the condition of cullus culture such as hormone concentration resulted in affecting shoots differentiation. The best result of shoots formation from the callus reculture were obtained from the combination of 0.5-1.0mg/1 BAP and 0.1-1.0mg/1 NAA when the callus was cultured in 1.0mg/1 BAP and 0.05mg/1 NAA. When the callus was cultured in medium without BAP, the shoot was not differentiated in subculture regardless to BAP and NAA concentration. and only callus was formed. C. Poly-phenol substance was observed in MS medium supplemented without PVP, in which callus was not formed from the leaf of P. peltatum 'Rouletta'. Polyphenol substance was not observed in MS medium supplemented with PVP, in which callus formation was increased. D. The callus formation of P. peltatum 'Rouletta' showed the stem explant being best result. The best result particularly in the stem explant among others. The optimal hormonal concentration was 0.1mg/1 NAA and 5.0mg/1 BAP. The shoot formation was observed at 0.05mg/1 NAA and 1.0mg/1 BAP, 0.1mg/1 NAA and 5.0mg/1 BAP. The shoot was malformed and the tissue recultured turned necrotic.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Radiation Oncology Journal
• /
• v.9 no.2
• /
• pp.253-263
• /
• 1991

Twenty-seven patients with unresectable extrahepatic bile duct carcinoma (n=21) or with microscopic evidence of tumor rest after aggressive surgery for extrahepatic bile duct carcinoma (n=6) between 1985 and 1990 were given radiotherapy consisting intentionally external radiotherapy and/or intraluminal therapy using Gamma-Med 12i (192-Ir) high dose rate (HDR) remote control afterloading system following bile drainage procedures and Gianturco stent insertion. The objectives of this study has been to assess the feasibility and effects on survival of a combination of external radiotherapy and brachytherapy with which we hope to achieve optimal loco-regional control for patients with unresectable extrahepatic bile duct tumors. Sixteen patients were men and eleven were women, and the mean age was 58 years (34-70). 10MV X-ray was used for radiation therapy, with the total dose ranging from 45 Gy to 55 Gy, and intraluminal brachytherapy performed after external radiotherapy, with the dose of total 15 Gy. The minimum follow up was 12 months. Failure were predominantly local-regional, without distant failure. Median survival was 10 months; 2-year actuarial survival rates was $21\%$. Median survival for common hepatic duct (CHD) cancer was 9 months; for common bile duct (CBD) cancer, was 16 months. And median survival for incomplete surgery/external radiotherapy group and external/intraluminal radiotherapy group was 10 months; for external radiotherapy alone group, was 6 months. Use of chemotherapy and/or hyperthermia were not affected in survival. Therefore, our result is that the survival rates in the group of external/intraluminal radiotherapy were comparable with ones in the group of incomplete resection/external radiotherapy, and so we believe that the aggressive local and regional radiotherapy can improve the quality of life and the survival length.

• Journal of Plant Biotechnology
• /
• v.40 no.2
• /
• pp.79-87
• /
• 2013

The aim of this study was to establish plant regeneration from leaf explants of Sedum tosaense Makino, which is globally rare and endangered species. The leaf explants of S. tosaense were cultured on the MS medium supplemented with different concentration of BA and NAA for callus induction. Callus induction was showed the highest (100%) on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA. The highest number of shoots were regenerated when callus were cultured on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA for 5 weeks. The axillary bud were cultured on the MS media supplemented with combination of BA and NAA for in vitro propagation. The highest number of adventitious shoot (7.9 per explants) formed at $1.0mg{\cdot}L^{-1}$ NAA and $2.0mg{\cdot}L^{-1}$ BA. For rooting, MS medium supplemented with or without $2.0g{\cdot}L^{-1}$ activated charcoal was tested. The optimal results were observed using MS medium supplemented with $2.0g{\cdot}L^{-1}$ activated charcoal, on which 85.7 (No. of root), 4.6 cm (length of root). 1,200 ppm $CO_2$ and 350 ppm $CO_2$ were supplied for make certain the effects of $CO_2$ on pre-acclimatization by photoautotrophic culture. 1,200 ppm $CO_2$ treatment was established higher than 350 ppm $CO_2$ treatment. Soil acclimatization of in vitro plantlets was the best in mixture soil consisted of peat moss and perlite with 100% survival rate and they showed the maximum growth.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.694-705
• /
• 2017

The aim of this study was to isolate and identify marine bacterium with anti-methicillin-resistant Staphylococcus aureus (MRSA) activity, and to purify the anti-MRSA compound, as well as to determine its activity and synergistic effects. Among the marine bacteria isolated in this study, the YJ-1 isolate had the strongest anti-MRSA activity. The YJ-1 isolate was identified on the basis of its biochemical characteristics and an analysis of 16S rRNA gene sequences. The YJ-1 isolate showed over 99.2% homology with Pseudomonas stutzeri, and was designated as a Pseudomonas sp. YJ-1. The optimal culture conditions were $25^{\circ}C$ and initial pH 7.0. For the purification of the anti-MRSA compounds, the YJ-1 was cultured in Pa PES-II medium, and the culture filtrates were extracted by ethyl acetate, hexane, and 80% MeOH. The 80% MeOH fraction was separated by a $C_{18}$ ODS column, silica gel chromatography and a reverse phase HPLC, to yield three anti-MRSA agents, the MR1, MR2, and MR3 compounds. When the MR1 compound of $250{\mu}g\;mL^{-1}$ concentration was applied to the MRSA cells, over 95% of bacterial cells was killed within 48 hr. Compared with vancomycin and ampicillin, the MR1 compound showed significant anti-MRSA activity. In addition, the anti-MRSA activity was increased by dose and time dependent manners. Furthermore, the combination of an MR1 compound with vancomycin produced a more rapid decrease in the MRSA cells than did the MR1 compound alone. Taken together, our results suggest that the Pseudomonas sp. YJ-1 and its anti-MRSA compounds could be employed as a natural antibacterial agent in MRSA infections.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.447-453
• /
• 2019

In this study, the effect of supplying volume and frequency of a nutrient solution consisted with $NO_3-N$ 4.6, $NH_4-N$ 3.4, $PO_4-P$ 3, K 3, Ca 4.6 and Mg $2.2mmol{\cdot}L^{-1}$ on growth and fruit quality of 'Duke' blueberry was investigated. Three years old 'Duke' blueberry bushes cultivated in containers ($60{\times}80{\times}40cm$) filled with 130L peat moss and 40L pearlite (v/v) were selected for the experiment. The growth containers were mulched with sawdust. Two different volumes (4L and 8L) of nutrient solution was tested at three different supplying frequencies (one time, two times, and three times) per week and the drainage quality of nutrient solution and fruit quality of 'Duke' blueberry was evaluated. The optimal drainage rate for the vegetable cultivation is known to be 20-30%. The results revealed that the average drainage rates of 27% and 29% for the nutrient solution supplied in 'Duke' blueberry growth medium at 4L, 2 times/7 days and 4L, 3 times/7days, respectively. The highest shoot diameter (4.2mm) and shoot length (31cm) of 'Duke' blueberry was recorded with the 8L of nutrient solution supplied at 3 times per 7 days. According to the analysis of inorganic components in the drainage of nutrient solution, there was a tendency of absorbing nitrogen at the early stage of growth. The supplying volume and frequency of nutrient solution was not significantly affected on 'Duke' blueberry fruit weight, soluble solids content, and titratable acidity. The highest yield per bush (2.7kg) was recorded for the nutrient solution supplied with 4L at three times per 7 days, while the 4L nutrient solution supplied at one time per 7 days resulted the lowest yield of 1.4kg per bush. Consequently, the tested nutrient solution can be applied for the 'Duke' blueberry bushes with the volume of 4L at three times per week for the better crop growth.