• 제목/요약/키워드: Optics Glass

검색결과 275건 처리시간 0.021초

안경렌즈(CR-39)에의 DLC Hard 코팅에 관한 연구 (A Study on DLC Hard Coating in Ocular Lens(CR-39))

  • 이원진
    • 한국안광학회지
    • /
    • 제6권1호
    • /
    • pp.87-91
    • /
    • 2001
  • PECVD 방법으로 60 Hz 상용전원을 사용하여 발생한 아세틸렌 플라스마로부터 다이아몬드성 탄소박막을 제작하고 Raman 분광에 의하여 D($sp^3$)와 G($sp^2$) 피크를 관측하여 박막의 다이아몬드성 정도를 확인하였고 $sp^3$$sp^2$의 비율과 FTIR 결과로부터 박막내의 수소함량의 측정을 통하여 아세틸렌 분압비와의 연관성을 확인하였다.

  • PDF

페라이트 도금법에 의한 선글라스 렌즈의 제작과 자외선 차단효과 (Making sung lass lens by using ferrite plating and the effect of cutting off ultraviolet)

  • 하태욱;차정원
    • 한국안광학회지
    • /
    • 제7권1호
    • /
    • pp.35-38
    • /
    • 2002
  • 자외선과 전자파를 동시에 차단하는 선글라스렌즈를 제작하기 위하여 유리기판 위에 자성재료인 페라이트 박막을 페라이트 도금법으로 제작하였다. 이들은 모두 스피넬 구조의 단일상임을 확인할 수 있었으며, 육안으로 관찰할 때 거울면과 같은 광택을 가졌으며, 손톱으로 긁었을 때 흠집이 생기지 않는 경도를 보였다. 페라이트는 400nm 부근에서부터 급격히 투과율이 떨어져 자외선을 차단하는데 효과적인 양상을 보이고 있다. 타사제품과 비교하여 자외선 차단효과는 크게 떨어지지 않으며, 전자파 차단효과가 있는 페라이트를 코팅한 선글라스를 착용함으로서 유해전자파와 자외선을 차단하는 효과를 얻을 수 있을 것이다.

  • PDF

졸-겔법에 의한 SiO2-Tio2계 박막의 내후성 (The Weathering Resistance of Sol-Gel Derived Anti-Reflective SiO2-Tio2 Thin Films)

  • 김상문;임용무;황규석
    • 한국안광학회지
    • /
    • 제3권1호
    • /
    • pp.237-242
    • /
    • 1998
  • $80SiO_2-20TiO_2$(mol%)의 무색투명한 비정질 박막을 현미경용 슬라이드 유리판과 사파이어 위에 tetraethyl orthosilicate와 titanium trichloride의 전구체 용액을 사용하여 스핀코팅방법으로 제조하였다. 코팅 후 $750^{\circ}C$에서 열처리된 박막은 높은 투과율과 낮은 반사율을 보였다. 슬라이드 유리판에 코팅한 $SiO_2-TiO_2$ 박막의 경우에 나트륨이온과 산소 간의 강한 상호작용에 의하여 고온과 높은 습도에서도 안정성이 우수하였다.

  • PDF

시력 보정용 렌즈의 품질 개선방향 (For Improvement in Quality of a Lens for Sight Revision)

  • 정맹식;김홍선
    • 한국안광학회지
    • /
    • 제3권1호
    • /
    • pp.167-179
    • /
    • 1998
  • 현재 렌즈제조업체의 실정은 여러 가지 요인으로 기술이나 기계설비, 투자가 위축되어 있으나 경쟁력 향상을 위해서는 좀더 과감한 투자가 필요하다. 제품의 신임도는 무엇보다 관리기술과 품질검사가 중요한데 외관검사와 내관검사는 육안이 아닌 현미경과 컴퓨터를 이용하여 과학적으로 해야하며, 강도검사는 자동차유리강도검사와 마찬가지로 안경렌즈의 파손시 신체에 부상이 없도록 해야 한다. 또한 안경렌즈의 원재료는 기술수준의 미비로 인해 모두 수입되고 있으므로 이를 극복하기 위해서는 기술개발이 가능한 연구기관을 설립하고 전문인력을 양성해야한다.

  • PDF

스핀코팅으로 금속물질을 도핑한 TiO2박막의 광학적 특성 (Optical properties of metal doped TiO2 thin films prepared by spin coating-pyrolysis process)

  • 황규석;김재민;정주현
    • 한국안광학회지
    • /
    • 제12권1호
    • /
    • pp.17-22
    • /
    • 2007
  • Ti-나프텐산염과 금속을 출발원료로 사용하고, 스핀코팅-열분해법을 이용하여 실리카 유리위에 박막을 제조하였다. 도포된 박막은 $500^{\circ}C$ 공기에서 10min동안 열처리하였다. 이를 5회 코팅한 박막은 마지막으로 공기에서 $600^{\circ}C$에서 30min으로 하였다. 박막의 특성을 분석하기 위하여 X-선 회절 분석, 전자현미경, UV스펙트럼을 이용하여 분석하였다. 밴드갭에서 가장 큰 장파장 쪽으로 이동은 Fe을 도핑한 $TiO_2$ 박막이었다.

  • PDF

안경용 초음파세척기를 이용한 소프트렌즈 세척 실태 조사와 세척용기에 따른 단백질 제거 효과 (The Investigation on Ultrasonic Cleaning of Soft Contact Lenses in Local Optical Shops and the Protein Removal Effect by Lens Containers)

  • 구성봉;조슬비;박미정;김소라
    • 한국안광학회지
    • /
    • 제16권1호
    • /
    • pp.31-40
    • /
    • 2011
  • 목적: 본 연구는 안경원에서의 안경용 초음파세척기를 이용한 소프트렌즈 세척 실태를 조사하고 세척용기를 달리하였을 때의 단백질 제거 효과를 비교하기 위하여 수행되었다. 방법: 서울시 소재 75개 안경원을 대상으로 소프트렌즈 세척 실태에 관한 설문조사를 실시하였다. 또한 인공누액을 사용하여 소프트렌즈에 인위적으로 단백질을 침착시킨 후 세척용기를 달리하여 안경용 초음파세척기로 세척한 후 단백질 잔존량을 측정함으로써 세척효율을 비교하였다. 또한 반복적인 초음파 세척으로 인한 소프트렌즈의 표면과 습윤성 변화를 분석하였다. 결과: 안경원에서 콘택트렌즈 세척에 안경용 초음파세척기를 이용하는 주목적은 신속함 때문임을 확인하였다. 세척용기로 플라스틱 렌즈 용기와 유리병 렌즈용기를 사용하고 안경용 초음파세척기로 소프트렌즈를 세척한 경우 유리병 렌즈용기를 사용하였을 때 세척효율이 높은 경향을 보였으나 유의성 있는 차이는 아니었다. 한편 반복적인 초음파 처리로 인하여 소프트렌즈의 표면과 습윤성의 변화가 나타남을 관찰할 수 있었다. 결론: 안경용 초음파세척기 이용 시 세척용기로 플라스틱 렌즈용기와 유리병 렌즈용기의 사용이 모두 효과적이었지만 반복적인 초음파 세척 시에는 세척용기를 사용하였다 하더라도 초음파로 인한 소프트렌즈의 변성이 우려되므로 주의를 기울여 사용하여야 것이다.

Assessing the Refractive Index of Glass Beads for Use in Road-marking Applications via Retroreflectance Measurement

  • Shin, Sang Yeol;Lee, Ji In;Chung, Woon Jin;Cho, Sung-Hoon;Choi, Yong Gyu
    • Current Optics and Photonics
    • /
    • 제3권5호
    • /
    • pp.415-422
    • /
    • 2019
  • Retroreflection of vehicle headlights, as induced by spherical glass beads, is a key optical phenomenon that provides road-surface markings with greatly enhanced visibility, thus better securing a driver's safety in the nighttime as well as in unclear daytime. Retroreflectance of glass beads is a quite sensitive function of their refractive index, so that measurement of the refractive index of glass specifically in the shape of spherical beads needs to be performed within a reasonable uncertainty that is tolerable for road-marking applications. The Becke line method has been applied in assessing refractive index of such glass beads as e.g. an industrial standard in the Republic of Korea; however, the reference refractive-index liquids are not commercially available these days for refractive index greater than 1.80 due to the toxicity of the constituent materials. As such, high-refractive-index glass beads require an alternate method, and in this regard we propose a practically serviceable technique with uncertainty tantamount to that of the Becke line method: Based on comparison of calculated and measured retroreflectance values of commercial glass beads, we discover that their refractive index can be determined with reasonable precision via the retroreflectance measurement. Specifically, in this study the normalized retroreflectance originating from a single glass sphere is computed as a function of refractive index using the Fresnel equations, which is then validated as coinciding well with retroreflectance values measured from actual specimens, i.e. glass-bead aggregates. The uncertainties involved are delineated in connection with radius and imperfections of the glass beads.

CuCl 미립자가 분산된 비선형 광학유리의 제조와 비선형 광특성: I. 제조와 미세조직 및 광특성 (Preparation and Nonlinear Optical Properties of CuCl-doped Nonlinear Optical Glasses: I. Preparation, Microstructure, and Optical properties)

  • 윤영권;한원택
    • 한국세라믹학회지
    • /
    • 제34권4호
    • /
    • pp.420-428
    • /
    • 1997
  • Alumino-borosilicate glasses containing nano-sized CuCl crystals for nonlinear optical application were prepared by the melting and precipitation process, and structural and optical properties were investigated by using XRD, TEM, SAXS, and optical spectroscopy. the average radius of the precipitated CuCl particles was about 2 nm. The blue shift of Z3 resonance peak with decreasing the precipitated CuCl particles size was found and the radius increased with decreasing the glass transition temperature of the matrix glass and with increasing the temperature and duration time of the precipitation heat treatment.

  • PDF

Athermal and Achromatic Design for a Night Vision Camera Using Tolerable Housing Boundary on an Expanded Athermal Glass Map

  • Ahn, Byoung-In;Kim, Yeong-Sik;Park, Sung-Chan
    • Current Optics and Photonics
    • /
    • 제1권2호
    • /
    • pp.125-131
    • /
    • 2017
  • We propose a new graphical method for selecting a pair of optical and housing materials to simultaneously athermalize and achromatize an LWIR optical system. To have a much better opportunity to select the IR glasses and housing materials, an athermal glass map is expanded by introducing the DOE with negative chromatic power. Additionally, from the depth of focus in an LWIR optical system, the tolerable housing boundary is provided to realize an athermal and achromatic system even for not readily available housing material. Thus, we can effectively determine a pair of optical and housing materials by reducing the thermal shift to be less than the depth of focus. By applying this method to design a night vision camera lens, the chromatic and thermal defocuses are reduced to less than the depth of focus, over the specified waveband and temperature ranges.

Achromatic and Athermal Design of an Optical System with Corrected Petzval Curvature on a Three-dimensional Glass Chart

  • Lim, Tae-Yeon;Kim, Yeong-Sik;Park, Sung-Chan
    • Current Optics and Photonics
    • /
    • 제1권4호
    • /
    • pp.378-388
    • /
    • 2017
  • We present a graphical method for determining a pair of optical materials and powers to design an achromatic and athermal lens system with corrected Petzval curvature. To graphically obtain the solutions, a three-dimensional (3D) glass chart is proposed. Even if a particular material combination is unavailable, we can select an element suitable for a specific lens and continuously change the element powers of an equivalent single lens for aberrations correction. Thus, we can iteratively identify the materials and powers on a 3D glass chart. By designing a fisheye lens using this method, an achromatic and athermal system with flat Petzval curvature is obtained, over the specified waveband and temperature ranges.