• E2M - 전기 전자와 첨단 소재
• /
• 제8권1호
• /
• pp.64-70
• /
• 1995

We discussed the thermal analysis for a recording media with the variation of the laser pulse duration, the laser power and the temperature distribution in order to optimize the Te-based antireflection structure from the computer calculations. In the case that the radial heat diffusion is negligible, we can calculate the maximum temperature of the recording layer at the center of the spot by the Simple Model. The temperature profile of the recording layer is obtained from the Numerical Model by considering the total specific heat and the latent heat. As a result, the effect of the heat sinking acting as a thermal loss for the hole formation could be minimized by introducing the pulse with the hole formation duration(.tau.) below the thermal time constant(.tau.$_{D}$) of a dielectric layer. These requirments can be satisfied by using the dielectric thickness of the 2nd ART(Anti-Reflection Trilayer) condition or the dielectric materials with a low thermal diffusivity.y.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.32-33
• /
• 2000

최근 다른 두께로 조합된 양자 우물 구조를 이용한 연구가 다음과 같이 각각 다른 목적으로 진행되고 있다. 이러한 불균일 양자 우물 구조는 주로 광대역폭 반도체 광 증폭기를 위한 구조$^{l),2)}$ 광대역폭 Superluminescent Diode에 적용하기 위한 구조, $^{3)}$ 광대역폭 및 온도 비의존성 면발광 레이저를 위한 구조$^{4)}$ 로 이용되고 있으며 10여년 전에는 파장 조절 및 파장 스위칭을 위한 구조로 연구되었다.$^{5).6)}$ 이들 소자의 실현을 위해 우선 불균일 양자 우물 구조의 특성을 알아볼 필요가 있다. 본 연구에서 사용한 양자 우물 구조는 그림 1과 같이 각 양자 우물의 두께가 다르게 분포되어 있다. 그리고 이 구조를 CBE로 성장하고 릿지형 반도체 레이저를 제작하여 공진기 길이와 주입전류에 따른 발광 파장 특성으로부터 불균일 양자 우물 구조에서의 캐리어 분포 특성을 유추하였다. (중략)

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.115-120
• /
• 2020

A novel method is proposed for controlling the distance of an image plane in Fourier holograms using varifocal electric-field-driven liquid-crystal (ELC) lenses. Phase Fresnel lenses are employed to reduce the thickness and response time of the ELC lenses. The voltages applied to the electrodes of the ELC Fresnel lens are adjusted so that the lens has the same retardation distribution as an ideal lens. The focal length can be controlled by changing the retardation distribution with the applied voltages. Simulations were conducted for the image reconstruction of Fourier holograms with various focal lengths of the ELC Fresnel lenses. The simulation results indicate that the distance of the image plane can be properly controlled with the varifocal ELC Fresnel lens.

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.6-11
• /
• 2010

Researches for actuator which is appropriate to slim optical disk drive (ODD) have been progressed for a long time. Various types of actuators are suggested to secure high performances with slim thickness. In this paper, the slim actuator with symmetric electromagnetic (EM) circuit is suggested to apply slim ODD. Various EM circuits are proposed to increase EM force in the focusing and the tracking directions. Flexible mode frequencies and driving sensitivities are increased by using stress distribution and design of experiment (DOE). Consequently, final model is suggested to have high flexible mode frequencies and driving sensitivities.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.790-799
• /
• 2005

본 연구에서는 충청남도 공주시에 위치한 공주대학교 자연과학대학 옥상에 설치된 분광복사측정기의 일종인 스카이라디오미터(Sky-radiometer)로 측정된 직달 및 산란 일사량을 이용하여 간접적으로 공주지역의 에어로솔의 광학적 특성을 분석하였다. 분석기간은 2004년 1월부터 12월까지이며 에어로솔의 광학적 특성의 분석에 활용된 알고리즘은 Skyrad.pack.3(Nakajima et al., 1996)이다. 주요 분석요소는 에어로슬의 광학두께(AOT), 단일 산란알베도(SSA), 옹스트롬 지수${\alpha}$ 및 에어로솔의 크기별 분포이며 분석결과의 질을 높이기 위하여 초기 관측 자료의 품질검사를 수행하였다. 공주지역의 연평균 AOT, ${\alpha}$ 및 SSA는 각각 0.46, 1.14, 그리고 0.91이며 계절 및 기상현상에 따라 큰 시간변동을 보이고 있다. 크기별 입자분포에서는 미세입자와 조대입자에서 최대치가 나타나는 쌍봉(bi-modal) 형태를 보이고 있으며 황사(Asian dust) 기간인 봄에는 조대입자의 총 부피가 크게 증가하고 여름에는 반대로 미세입자의 부피가 증가하는 계절변동을 보이고 있다. 이러한 현상은 봄철동안에 AOT와 SSA가 각각 크게 증가하고 감소하는 점에서도 확인되고 있다. 또한 공주지역의 에어로솔의 광학적 특성은 계절에 따라서 변화가 크게 나타나고 있으나 풍향의 영향은 거의 받지 않는 것으로 나타나고 있다.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.225-234
• /
• 2000

The purpose of this study was to investigate the distribution and fluorescene intensity of vasoactive intestinal polypeptide(VIP) immunoreactive cells in rat trigeminal ganglion after inferior alveolar nerve axotomy. The animals were divided into normal and two experimental groups. The experimental animals were sacrificed at 14th and 28th day after inferior alveolar nerve axotomy. The trigeminal ganglion was removed and immersed in the 4% paraformaldehyde-0.2% picric acid in 0.1M phosphate buffer. Serial frozon sections about $16{\mu}m$ in thickness were cut with a cryostat. The immunofluorescence staining was performed. The rabbit anti-VIP(1 : 8,000) was used as primary antibody and fluorescene isothiocynate(FITC)-conjugated anti-rabbit IgG(1 : 80) as secondary antibody. The slides were observed under confocal laser scanning microscope. Three-dimensional images were constructed from 9 serial images(each $1{\mu}m$ in thickness) made by automatic optical sectioning. Unprocessed optical sections were obtained and stored on a optical disk. Color picture were printed by a video copy processor. The results were as follows; 1. The appearance of VIP immunoreactive cells in the mandibular part of trigeminal ganglion was 8.79${\pm}$1.99% in normal group and 39.16${\pm}$5.62% in 14 days, 16.25${\pm}$2.39% in 28 days after inferior alveolar nerve axotomy groups. 2. The relative fluorescence intensity of VIP immunoreactive cell bodies in the mandibular part of trigeminal ganglion was 134.40${\pm}$10.39 in normal group and 192.88${\pm}$14.06 in 14 days, 143.10${\pm}$5.02 in 28 days after nerve axotomy groups. Therefore, the relative fluorescence intensity of 14 days after nerve axotomy group was 43.3% higher than intensity of normal group. 3. In optical single section analysis of VIP immunoreactive cell bodies, white cell bodies(moderate fluorescence intensity) were the most abundant in normal and 28 days after nerve axotomy groups. Whereas, in 14 days after nerve axotomy group, red cell bodies(high fluorescence intensity) were the most abundant. 4. In optical serial section analysis of VIP immunoreactive cell bodies, red cell bodies(high fluorescence intensity) were observed in a part of the 9 sections of normal and 24 days after nerve axotomy groups. Whereas, red cell bodies were observed in all of the 9 sections of 14 days after nerve axotomy group. 5. The results indicates that number and fluorescence intensity of VIP immunoreactive cells were increased in the mandibular part of trigeminal ganglion following inferior alveolar nerve axotomy.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.56.1-56.1
• /
• 2011

The solar and meteorological resources map is calculated using by one-layer solar radiation model (GWNU model), satellites data and numerical model output on the Korean peninsula. The Meteorological input data to perform the GWNU model are retrieved aerosol optical thickness from MODIS (TERA/AQUA), total ozone amount from OMI (AURA), cloud fraction from geostationary satellites (MTSAT-1R) and temperature, pressure and total precipitable water from output of RDAPS (Regional Data Assimilation and Prediction System) and KLAPS (Korea Local Analysis and Prediction System) model operated by KMA (Korea Meteorological Administration). The model is carried out every hour using by the meteorological data (total ozone amount, aerosol optical thickness, temperature, pressure and cloud amount) and the basic data (surface albedo and DEM). And the result is analyzed the distribution in time and space and validated with 22 meteorological solar observations. The solar resources map is used to the solar energy-related industries and assessment of the potential resources for solar plant. The National Institute of Meteorological Research in KMA released $4km{\times}4km$ solar map in 2008 and updated solar map with $1km{\times}1km$ resolution and topological effect in 2010. The meteorological resources map homepage (http://www.greenmap.go.kr) is provided the various information and result for the meteorological-solar resources map.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.705-709
• /
• 2017

The electronic and optical characteristics of molybdenum disulphide ($MoS_2$) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of $MoS_2$ layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the $MoS_2$ layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the $MoS_2$. Optical microscopy works only when $MoS_2$ is on a silicon substrate covered with $SiO_2$ of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of $MoS_2$ layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of $MoS_2$ layers. This method can be used to characterize $MoS_2$ samples at nanometer-level spatial resolution, which is below the limits of other methods.

• 대한원격탐사학회지
• /
• 제24권4호
• /
• pp.289-298
• /
• 2008

본 연구에서는 에어로솔의 간접 효과를 고려한 구름의 광학두께와 유효입자반경을 산출하기 위해 새로운 알고리즘을 개발하였다. 구름의 미세물리적 특성을 산출하기 위해 Nakajima and Nakajima(1995)의 방법을 응용하였다. 다양한 대기상태에서 복사전달모델을 이용하여 미리 계산한 서로 다른 LUT을 적용하여 최종 산출물인 구름광학두께와 유효입자반경을 산출하였다. 러시아지역에 산불이 있었던 2003년 5월 한반도 주변을 사례로 선택하였다. 이 때 발생한 에어로솔은 대기 흐름을 따라 한반도까지 도달하여 한반도 주변의 날씨에 매우 많은 영향을 주었다. 본 연구에서는 이 시기에 러시아 지역의 산불로 인하여 발생한 에어로솔이 한반도 주변의 구름에 어떠한 영향을 주는지 알아보았다. 이 사례의 알고리즘 적용을 위해 Terra위성에 탑재된 분광계인 MODIS자료를 사용하였다. 사례분석 결과, 에어로솔이 있는 시기에는 유효입자반경이 $20{\mu}m$ 이상의 큰 구름은 거의 존재하지 않았음에 비해, 에어로솔이 거의 없는 시기에는 $20{\mu}m$ 이상의 큰 구름도 다수 존재하였다. 즉, 에어로솔의 영향하에 발달한 구름은 구름광학두께는 크고, 유효입자반경은 작은 구름이라는 것을 확인할 수 있었다. 이러한 결과는 에어로솔이 구름의 미세물리적 특성을 변화시킨다는 것을 보여준다.

• 소성∙가공
• /
• 제25권5호
• /
• pp.301-305
• /
• 2016

The manual modification of stamping die has widely been used in order to reduce springback after sheet metal forming. When UHSS (Ultra High Strength Steel) is used in sheet metal forming, the die design considering springback compensation is more difficult because higher strength sheet has more springback. In this study, the optimization method was used in order to design die geometry considering springback compensation after forming of 1.2GPa UHSS. Die geometries were defined as design variables and the springback distance from the die surface was conducted as object function in optimization process. The optimized die geometry considering springback compensation was performed using finite element and optimization analysis. The simulation results such as thickness distribution and springback amount were compared with measured data using 3D optical measurement system (GOM ARGUS, ATOS). And the prediction of springback amount showed a good agreement within test results.