• 대한전자공학회논문지
• /
• 제17권6호
• /
• pp.72-77
• /
• 1980

본 논문에서는 optical feedback prebias control 회로상의 몇가지 일반적인 문제점들을 분석하고 이에 수반되는 회로 조정의 문제를 해결하기 위하여 LD simulation 회로를 제시하였다. 온도 시험에서 LD의 총 light power를 feedback loop에 사용하였을 때 0℃부터 36℃까지의 사이에서 1.5%의 light power 감소를 보였고 star coupler를 beam splitter로 1%정도를 분지, feedback loop에 사용한 결과 transmitter로서 좋은 전송 특성을 가짐을 관찰하였다.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.180-183
• /
• 2014

The surface of semiconductor solar cells, such as a-Si or CIGS (CuInGaSe) solar cells is not flat but textured in the microscopic domain. With textured surfaces, the optical reflectivity of a solar cell is different from that of flat surfaces in the wavelength region. In this paper, the effects of a textured surface on a CIGS solar cell are presented by RCWA (Rigorous Coupled Wave Analysis) method. The effect of incoherent light is also considered by RCWA with a Fourier analysis while conventional optical simulation uses the input light on the solar cell as coherent light. Using experimental results, the author showed that the RCWA method with a Fourier analysis is a proper method to simulate the optical properties of CIGS solar cells.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.13-20
• /
• 2012

The light transmittance of optical device is one of the important conditions to improve the product performance and it has researched through the various methods. One of these methods to improve the optical transmittance is to use a pattern on optical surface. The advantages of this method are to simplify the manufacturing process and to easy mass production. If a surface of glass has with the proper patterns, we can expect a great effect on optical transmittance. The purpose of this research is to derive a pattern to get high transmittance from a theoretical approach and to analyze the transmittance through the simulation. And then, we made a sample with a pattern and compared with the results from simulation and experiment.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 2020

Many types of optical plastic films are essential in optoelectronics display unit fabrication and it is important to develop high precision laser cutting methods of optical films with extremely low level of film surface contamination by fume particles. This study investigates the effects of suction and blowing air motions with air flow misalignment in removing fume particles from laser cut line by employing random particle trajectory simulation and probabilistic particle generation model. The computational results show fume particle dispersion behaviors on optical film under suction and blowing air flow conditions. It is found that suction air flow motion is more advantageous to blowing air motion in reducing film surface contamination outside designated target margin from laser cut line. While air flow misalignment adversely affects particle dispersion in blowing air flows, its effects become much more complicated in suction air flows by showing different particle dispersion patterns around laser cut line. It is required to have more careful air flow alignment in fume particle removal under suction air flow conditions.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.233-238
• /
• 2014

In this paper, in order to achieve slim and light liquid crystal display, we examine the optical conditions that can obtain uniform light with higher optical efficiency over whole light guide plate (LGP) through simulation. Furthermore, to overcome the issues of hot spot in front of red, green, and blue light emitting diodes (RGB LEDs) source and non-uniform color mixing, we propose four shaped color mixing bars tied up with the LGP and check the optical characteristics of the LGP with them by simulation. Consequently, we could know the optical conditions of improving optical efficiency and optical uniformity in the LGP through the optical design. Also we confirmed that the issues of the hot spot and non-uniform color mixing in edge type LED could be solved by using the ${\bigwedge}$-shaped window color mixing bar.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.210-211
• /
• 1999

• 한국광학회:학술대회논문집
• /
• 한국광학회 1996년도 Advance Program of 13th optics andquantum Electronics conference, 1996제13 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.88-88
• /
• 1996

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.145-146
• /
• 2008

• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.60-60
• /
• 1997

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.16-17
• /
• 2002