• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.477-484
• /
• 2014

In this paper, we propose a new optical secret key sharing method based on the Diffie-Hellman key exchange protocol required in cipher system. The proposed method is optically implemented by using a free-space interconnected optical logic gate technique in order to process XOR logic operations in parallel. Also, we present a compact type of optical module which can perform the modified Diffie-Hellman key exchange for a cryptographic system. Schematically, the proposed optical configuration has an advantage of producing an open public key and a shared secret key simultaneously. Another advantage is that our proposed key exchange system uses a similarity to double key encryption techniques to enhance security strength. This can provide a higher security cryptosystem than the conventional Diffie-Hellman key exchange protocol due to the complexity of the shared secret key. Results of numerical simulation are presented to verify the proposed method and show the effectiveness in the modified Diffie-Hellman key exchange system.

• ETRI Journal
• /
• 제24권2호
• /
• pp.117-130
• /
• 2002

Due to its salient features, the optical burst switch is becoming a key technology for the optical Internet. Within this technology, the survivability issue in the optical Internet has to be addressed because a simple failure causes severe damage to the huge amount of data carried in optical fiber. In this paper, we introduce a restoration procedure that can provide good survivability in the optical burst switch (OBS)-based optical Internet. OBS restoration can survive various types of network failure while maintaining good network performance. We propose novel restoration mechanisms, namely, "temporary Label Switched Path (LSP)" and "bossy LSP," to enhance restoration time and network utilization. The simulation results verify that the proposed OBS restoration achieves good network performance and provides good network connectivity as well.

• 한국결정성장학회지
• /
• 제13권1호
• /
• pp.15-18
• /
• 2003

High purity single crystalline calcium fluoride ($CaF_2$) has excellent optical transmission characteristics down to deep UV and is therefore selected as the main optical material for the next generation of lithography apparatus operating at wavelength of 157 nm. The growth of large sized $CaF_2$ single crystals with the required properties for this optical application can be achieved only by optimizing the crystal growth process by the aid of numerical simulation. This needs especially a precise calculation of the heat transport and temperature distribution in the solid and liquid $CaF_2$ under crystal growth conditions. As $CaF_2$ is considered to be semitransparent, the internal radiative heat transfer in $CaF_2$ plays an decisive role in the simulation of the heat transport. On the other hand it is very difficult to obtain quantitative experimental data for evaluating numerical models as $CaF_2$ is extremely corrosive at high temperatures. In this work we present a newly developed experimental technique to perform temperature measurements in $CaF_2$-crystal as well as in the melt under conditions of crystal growth process. These experimental results are compared to calculated temperature data, which were obtained by using different numerical models concerning the internal heat transfer in semitransparent $CaF_2$. It will be shown, that an advanced model, which was developed by the authors, gives a much better agreement with experimental data as a standard model, which was taken from the literature.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Journal of Information Display
• /
• 제9권1호
• /
• pp.26-32
• /
• 2008

The dependence of optical performances of collimating films such as prism films and pyramid films on the reflecting properties of reflection films were investigated by using a ray tracing technique. The angular distribution of the luminance and the on-axis luminance gain were obtained by using a simple backlight model composed of a reflection film, a virtual flat light source, and a collimating film. Three kinds of reflecting properties were used, which were a perfect Lambertian reflector, a perfect mirror reflector, and a reflector having both diffuse and specular properties. It was found that the on-axis luminance gain was the highest in the simulation where a mirror reflector was used, while the viewing angle was the widest where the Lambertian reflector was used. This result indicates that it is necessary to optimize the simulation condition such as the reflecting properties in order to predict the optical performances of collimating films accurately. Quantitative correlation between the optical characteristics of collimating films and the reflecting properties of reflection films can be used to improve simulation technique for the development and the optimization of collimating films for LCD backlight applications.

• 한국응용과학기술학회지
• /
• 제34권1호
• /
• pp.125-131
• /
• 2017

콘크리트 혼화제의 무수축 그라우트에서 산란체와 흡수체의 영향은 빛산란에 의해 파장에 대한 산란세기로 설명된다. New Austria Tunnel Method의 수지에 대한 산란의 분자특성들은 연구하기 위해 Monte Carlo Simulation하였다. 이는 산란매질에서 광학적 파라미터들(${\mu}_s$, ${\mu}_a$, ${\mu}_t$)에 의해 조사되어 그들의 영향을 알 수 있었다. 산란매질에서 광자에 대한 빛 분포에 의한 결과는 광원에서 검출기까지 거리가 가까우면 무수축혼화제의 산란이 증가하여 산란세기가 크게 나타나는데 혼화제가 첨가함에 따라 무수축 성질이 크게 나타났다. 이는 강구조물의 내구성을 위한 코팅과 부식에서 좋은 모델을 디자인하는데 도움이 될 것이다.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.473-479
• /
• 2012

혼탁매질에서 산란체와 흡수체의 영향은 빛산란에 의해 파장에 대한 산란세기로 설명된다. New Austria Tunnel Method의 수지에 대한 산란의 분자특성들은 연구하기 위해 Monte Carlo Simulation하였다. 이는 산란매질에서 광학적 파라미터들(${\mu}_s$, ${\mu}_a$, ${\mu}_t$)에 의해 조사되어 그들의 영향을 알 수 있었다. 산란매질에서 광자에 대한 빛분포에 의한 결과는 광원에서 검출기까지 거리가 가까우면 산란이 증가하여 산란세기가 크게 나타났다. 이는 강구조물의 내구성을 위한 코팅과 부식에서 좋은 모델을 디자인하는데 도움이 될 것이다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.147-151
• /
• 2004

In this study, an optical fiber assembly directly coupled with a laser diode or a photo diode is designed to confirm high reliable optical coupling efficiency of optical transmitter(Tx) and receiver(Rx). The optical fiber assembly is fabricated by soldering an optical fiber and a Kovar ferrule using a glass solder after inserting an optical fiber through a Kovar ferrule. The Kovar which has good welding characteristics is applied to introduce laser welding technique. The glass solder has excellent thermal characteristics such as thermal shift delamination compared with PbSn, AuSn solder previously used usually. Furthermore, the glass solder doesn't need fiber metalization and this enables low cost fabrication. However, the glass soldering is high temperature process over 35$0^{\circ}C$ and the convex shape after solidification due to surface tension causes the stress concentration on optical fiber. The stress concentration on the optical fiber increases the optical insertion loss and possibility of crack formation. The shape of glass solder was designed referring to 2-D Axi-symmetric FEM simulation. To test the mechanical reliability, mechanical vibration test and shock test were done according to Telcorida GR-468-Core protocol. After each test, the optical loss of the stress distributed fiber assembly didn't exceed 0.5 dB, which passes the test.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.34.4-35
• /
• 2008

The significant I&T process gain represented by reduction in overall budget expenditure can be obtained from the use of efficient alignment technique for large space optical systems. Such process gain tends to increase rapidly with an increase in aperture and/or in number of optical elements within the system. However, in practice, the alignment of multiple optical components tends to be rather difficult task because of the multiple coupling effects among the elements within the target system. In order to understand and hence identify the complex interplay of the wavefront coupling effects from the alignment process, the original differential wavefront sampling(DWS) method was presented elsewhere in recent years. DWS uses partial differential of the wavefront of optical component and perturbation value of the optical component against a particular alignment factor. The straightforward application of DWS for an off-axis optical system revealed that it tends to give incorrect estimation of the given misalignment state. In this study, we added off-axis correction terms to the original DWS algorithm and investigated its alignment performance. The performance simulation result for a Korsch type space optical system shows that the modified DWS is capable of bringing the misaligned system into the target alignment tolerance only after 3 iterations. It also shows that this new improved algorithm can be used to estimate the source misalignment as well. We are planning to apply this method for the alignment of a 800mm Korsch type telescope in the near future. We discuss the computational technique, simulation results and implications in details.

• 한국광학회지
• /
• 제28권6호
• /
• pp.273-280
• /
• 2017

본 논문에서는 낮은 도로 조명을 위한 freeform reflector를 설계하였다. 높이에 비해 넓은 차선까지 배광을 보내야 하는 낮은 도로 조명의 경우, 기존의 등주식 도로 조명에 비해 균제도를 맞추기 힘들다는 단점이 있다. 조명 등급 M3를 만족시키기 위해 reflector를 part 9개로 나누어 part 별 반사면의 기울기를 변화시켜 원하는 배광을 갖도록 하였고, 각 점을 기준으로 fitted curve를 그려 이에 따른 수식을 도출하였다. LightTools의 street light simulation을 통해 M3 조명 등급에 만족하는 것을 확인하였고 직접 제작하여 실제 도로상에서 조명 등급을 만족시키며 설계 결과에 대한 타당성을 입증하였다.