• 한국광학회지
• /
• 제25권4호
• /
• pp.200-206
• /
• 2014

본 논문에서는 직경 $125{\mu}m$의 싱글모드 광섬유에 입사된 빔을 다방향으로 방사하기 위하여 이론적으로 계산된 값을 광학설계 프로그램인 LightTools를 이용하여 광섬유 끝단에 원뿔형 구조물을 모델링 하고 입사된 모든 빔이 전반사 되어 측면으로 방사되는 광섬유 팁과, 전방과 측면으로 동시에 방사가 가능한 광섬유 팁에 대해 시뮬레이션을 하였다. 이러한 결과를 가지고 광섬유 끝단에 펨토초 레이저와 $CO_2$ 레이저를 이용하여 원뿔형 구조물을 제작하고 시뮬레이션 결과와 비교 분석하는 연구를 수행하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 광학 및 양자전자학 워크샵
• /
• pp.33-39
• /
• 1991

We have developed a new holographic associative memory(HAN) based on an adaptive learning which uses learning pattern method (LPM). The LPM utilizes the simple optical implementation of outer-product learning, performance of adapitive learning. simulation are represented.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권2호
• /
• pp.121-138
• /
• 2001

Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.138-144
• /
• 2010

Optical analysis is necessary to optimize light emitting diode (LED) safety street lighting. In this study, optical analysis was conducted for 100 W LED safety street lighting. Experimental research on such a single LED was the first undertaken. Simulation modeling based on the optical properties of the single LED has compared between average road illuminances and has them analyzed with Korean Industrial Standards for LED safety street lighting (KS C7658:2009). The simulation results demonstrated that the illumination performance (average road illuminance) was 75.3 lx at a height of 4 m and an area of $32\;m^2$, 45.25 lx at a height of 5 m and an area of $72\;m^2$, and 30.05 lx at a height of 6 m and an area of $128\;m^2$. 100 W safety street lighting (model CE180-ST-OS) designed by simulation was also compared between product and 100 W simulation modeling, and error rates averaged 5.6%. The 100 W LED safety street lighting base designed in simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100 W LED safety street lamp had reasonable performance. The design method for LED safety street lamps has been summarized based on the optical analysis.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.310-315
• /
• 2010

Theoretical and experimental investigations of moires in 3D displays were performed. To describe and minimize moires, we propose the polar representation form of moire waves. The experimental and theoretical data are in good agreement except in the neighborhood of the minimization angle. The implicit formulas are found for visible moires of line gratings at finite distances. The computer simulation and the physical experiments confirm the moire appearance for this case.

• 한국정보통신학회논문지
• /
• 제26권9호
• /
• pp.1312-1319
• /
• 2022

본 논문은 미지 우주물체에 대한 광학 연속 관측을 위한 효과 척도를 정의하고, 통합 시뮬레이션 수행을 이용하여 망원경/마운트 제어 시스템 관점에서 효과 척도를 만족할 수 있는 설계 변수 조합 범위를 제시하였다. 표적의 위치 예측과 함께 프레임률, 영상처리 소요시간과 측정 오차, 표적 궤적특성 및 마운트 김발의 기동성능 등의 설계 변수를 고려하여 전체적인 시스템 수준에서의 시뮬레이션을 구현하고 추적 성능을 분석하였다. 분석 결과 광학 관측 시스템의 연속 추적 성능은 프레임률과 마운트 기동성능의 조합에 의존적임을 확인할 수 있었다. 광학 관측 시스템을 설계하거나 상용 제품을 구입하여 유사 시스템을 구성할 때, 본 연구와 같이 효과분석 시뮬레이션을 이용하면 설계 변수들 사이의 적절한 요소 조합을 찾을 수 있을 것이다.

• ETRI Journal
• /
• 제27권3호
• /
• pp.267-272
• /
• 2005

The transmission performance of optical labeling based on a combined frequency shift keying/amplitude shift keying (FSK/ASK) format is studied by numerical simulation. The simulation demonstrates that the bit-error ratio (BER) characteristic of an ASK signal is limited by the extinction ratio, received optical power, and dispersion, simultaneously. However, an FSK signal is mainly limited by the extinction ratio (ER) and received optical power when the peak spectrum, which is used to detect the FSK signal, is relatively narrow.

• 대한산업공학회지
• /
• 제28권1호
• /
• pp.25-35
• /
• 2002

This paper presents a heuristic algorithm that a mobile robot avoids obstacles using optical flow. Using optical flow, the mobile robot can easily avoid static obstacles without a prior position information as well as moving obstacles with unknown trajectories. The mobile robot in this paper is able to recognize the locations or routes of obstacles, which can be detected by obtaining 2-dimensional optical flow information from a CCD camera. It predicts the possibilities of crash with obstacles based on the comparison between planned routes and the obstacle routes. Then it modifies its driving route if necessary. Driving acceleration and angular velocity of mobile robot are applied as controlling variables of avoidance. The corresponding simulation test is performed to verify the effectiveness of these factors. The results of simulation show that the mobile robot can reach the goal with avoiding obstacles which have variable routes and speed.

• 반도체디스플레이기술학회지
• /
• 제5권2호
• /
• pp.7-10
• /
• 2006

The detailed studies regarding to the front and rear panel geometries of plasma display were needed to improve the luminance and efficiency. In plasma displays, 3-dimensional optical code can be used to analyze the variation of geometries and the changing of optical properties. The visible light distributions and illuminance were simulated depending on bus electrode position, ITO geometries, and alteration of dielectric layer's properties. This paper is concerned with development of a cell having high luminance and high efficiency for optical simulation. And the result of values could be expected to the application of real POP cell.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.51-63
• /
• 1995

In this paper, a new real-time optical image switching system based on the phase-typed BPEJTC is suggested. The phase filter mask which has the arbitrary position mapping function between input and output planes is constructed by using the modified JTPS of the BPEJTC. Then, the input image is convolved with this phase filter mask in the spatial frequency domain and through further Fourier transform the input image is switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switching system is opto-digitally constructed and through some experiments on image switching the possiblity of real-time implementation of the multiple optical image switching system by using the BPEJTC is suggeste.