• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.111-113
• /
• 1997

The purpose of this paper is to propose a production flow for 155Mbps transmitter/receiver optical modules. Compact optical module packages for use as 155Mbps optical interfaces are developed by implementing a self-alignment principle for the formation of V-grooves and solder bumps. on the bases of experimental results of two hundreds of receiver/transmitter optical modules, each steps and flows of our production are developed by production efficiencies.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.121-128
• /
• 2021

We propose a novel, tiny optical receiver engine utilizing an all-in-one package based on embedded optics technology. The package's best transmission S21 and reflection S22 opto-electric (OE) bandwidths are 49.8 GHz and 34.9 GHz, respectively, and the reflectance of the optical engine is below -31.7 dB for all channels. The engine satisfies the MIL-STD-883G standard for reliability tests, such as mechanical and thermal shock, and vibration resistance. The sensitivity after 10 km single-mode fiber (SMF) transmission is below -8 dBm. The optical receiver engine is cost-competitive and applicable for 400G coarse wavelength division multiplexing 4 (CWDM4) 10 km optical transceivers.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.377-382
• /
• 2009

In this paper, theoretical analysis for metropolitan optical networks is performed. First, analytical optical SNR is derived assuming each node consists of an EDFA, an optical filter, an optical switch, and a VOA, and then the relationship between OSNR and BER is studied. In a metropolitan optical network, an optical signal can be dropped to deliver data, and we also studied the effect of drop loss on system performance. When the drop loss is relatively small, the receiver structure of the node can be treated as a preamplifier receiver which is widely used in long-haul systems. In that case, ASE noise from EDFAs is the dominant noise source in the receiver. However, system performance is relatively insensitive to OSNR when the drop loss is significant because of the noise sources in the receiver (thermal and shot noise).

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.184-185
• /
• 2002

We discussed the main issues of 10GHz Receiver packaging. High frequency structure simulations and circuit simulations for TO-CANs led to a new design for 10GHz optical receiver module packaging. The simulation results were compared to the measured laboratory data. The proposed package has low cost and easy manufacture process far mass production. Using this package, we had a good optical to electrical conversion (OE) characteristic at a data rate of 10Gbps.

• 한국인터넷방송통신학회논문지
• /
• 제13권5호
• /
• pp.49-54
• /
• 2013

1.25Gbps PON(Passive Optical Network)용 버스트 모드 광 수신기를 설계하고 $0.8{\mu}m$ BiCMOS공정을 사용해 제작하였다. 지수함수 증폭기를 이용하여 AGC(Automatic Gain Control) 신호 생성 소요 시간을 단축시켜 버스트 앞부분의 데이터 손실을 최소화하였다. 측정결과 버스트 모드 광 수신기의 AGC 기능은 정상적으로 잘 동작하고 특성도 양호함을 확인하였다. 한편, 아이패턴의 아이는 열려있기는 하나 심한 파형 왜곡이 있고, 이로 인해 지터 특성 저하되고 있었다.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.16-22
• /
• 1994

In this paper, transmitter and receiver modules for free space optical interconnection are implemented and characterized. In the transmitter module, bias circuitry which inject current into the direct modulated laser diode is fabricated and in the receiver module, p-i-n diode is integrated with an MMIC amplifying stage. Laser diode has a direct-modulated bandwidth of 2 GHz at 1.4 Ith bias while p-i-n diode and amplifying stage has a bandwidth of 1.3 GHz and 1.5 GHz, repectively. Optical interconnection has a bandwidth of 1.3 GHz and linearly transmit modulated voltage signal up to 1.5 Vp-p. Measured loss of optical interconnection is 5dB which is composed of optoelectronic conversion loss of 15 dB, electrical impedance mismatch loss of 6.7 dB in transmitter module and gain of 18 dB in receiver module. Seperation between transmitter and receiver can be extended up to 50 cm by using a lens.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.361-366
• /
• 2009

We propose the performance enhancing method optimization of an asynchronous 2.5 Gbps/1.25 Gbps optical subscriber network with inverse RZ (Return to Zero) coded downstream and NRZ (Non Return to Zero) upstream re-modulation by adjusting threshold level control of a receiver. We theoretically analyze the BER (Bit Error Rate) performance by modeling the occurrence of BER by simulation with MATLAB according to the types of downstream data. The results have shown that the normalized threshold level in an optical receiver could be saturated at 1/3 as the SNR (Signal to Noise Ratio) increases. The needed SNR for obtaining the BER $10^{-9}$ can be reduced by $\sim$5 dB by optimizing the normalized threshold level at 1/3 instead of by using the conventional receiver with threshold level of 0.5. The proposed system can be a useful technology for asynchronous optical access networks with asymmetric upstream and downstream data rates, because the improved minimum receiving power could replace a light source with a source with lower power and lower cost in an OLT (Optical Line Termination).

• Current Optics and Photonics
• /
• 제7권1호
• /
• pp.15-20
• /
• 2023

We propose a new coherent optical receiver (COR) to detect optical receiver mode (ORM) subchannels selectively in coherent optical (CO) ORM division multiplexing (ORMDM) systems. In the CO-ORMDM systems, each optical channel is a linear sum of ORM subchannels, to obtain high spectral efficiencies (SEs). The COR uses an ORM subcarrier as its local oscillator (LO) and reads the transmitted data at the origin times of ORM signals. For example, if the m^th ORM subcarrier is used as the LO, then the COR reads the data of the m^th ORM subchannel. The proposed COR is fast and can make CO-ORMDM systems useful for real-time optical communication with high SE.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.443-450
• /
• 2014

This paper presents a 20-Gb/s optical receiver circuit fabricated with standard 65-nm CMOS technology. Our receiver circuits are designed with consideration for parasitic inductance and capacitance due to bonding wires connecting the photodetector and the circuit realized separately. Such parasitic inductance and capacitance usually disturb the high-speed performance but, with careful circuit design, we achieve optimized wide and flat response. The receiver circuit is composed of a transimpedance amplifier (TIA) with a DC-balancing buffer, a post amplifier (PA), and an output buffer. The TIA is designed in the shunt-feedback configuration with inductive peaking. The PA is composed of a 6-stage differential amplifier having interleaved active feedback. The receiver circuit is mounted on a FR4 PCB and wire-bonded to an equivalent circuit that emulates a photodetector. The measured transimpedance gain and 3-dB bandwidth of our optical receiver circuit is 84 $dB{\Omega}$ and 12 GHz, respectively. 20-Gb/s $2^{31}-1$ electrical pseudo-random bit sequence data are successfully received with the bit-error rate less than $10^{-12}$. The receiver circuit has chip area of $0.5mm{\times}0.44mm$ and it consumes excluding the output buffer 84 mW with 1.2-V supply voltage.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.218-223
• /
• 2016

본 논문에서는 광통신시스템의 수신기에서 Butterworth 필터의 차수가 수신기의 감도에 미치는 상관관계에 대해 연구를 수행하였다. 일반적인 경우에는 필터의 차수가 증가하면 할수록 수신기의 감도가 증대된다. 이는 필터의 차수가 증가할수록 필터의 규격화 주파수의 응답이 구형파와 비슷해지기 때문이다. 그러한 이유로 수신기의 감도를 증가시키기 위해서 필터의 차수를 높이는 방법을 이용한다. 그러나 필터의 차수를 높이는 방법을 사용하면 시스템이 복잡해지고 시스템의 단가를 상승시키는 요인이 된다. 따라서 본 논문에서는 시스템을 간단히 구성하여 시스템의 단가를 낮추기 위한 방법을 모색하기 위해 수신기의 감도와 필터의 차수와의 상관관계에 대해 연구를 수행하였다. 시뮬레이션 결과 필터의 차수를 증가시키면 수신기의 감도가 상승하는 것을 확인 할 수 있었다. 또한 수신기의 감도를 감소시키지 않는 범위의 버터워스 필터의 차수는 2로 확인되었다. 따라서 본 논문의 결과를 사용한다면 저렴한 광시스템의 수신기를 구현이 가능하리라 사료된다.