• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.46-54
• /
• 2001

Technology of data storage device has developed noticeably as demands and needs of new media increase, Huge data can be conveniently handled using removable type optical disk. In the present paper, the trend and current issue of development for optical disk media are introduced. Standardization of next generation optical disk media, technology of recording and reading, and applications of magneto-optical devices are also discussed. Finally, a methodology of process optimization for design and fabrication of high density optical disk substrate is proposed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.445-450
• /
• 2001

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high data input/output possible. Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. These operational functional requirements are concerned with abilities of optical storage device. Especially, High rotational speed is deeply concerned with the noise and vibration of optical storage device, is important problem in development of optical storage device so much. This paper propose a new concept ROM media of optical storage device named as Cylindrical ROM media, and evaluate this by means of Axiomatic approach and empirical data.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.248-251
• /
• 2004

근접장 초해상 기술 중 대표적인 Super-RENS (Super Resolution Near Field Structure) 기술을 이용하여 25GB 용량의 BD(Blu-ray Disc) 다음 세대로 예상되는 100 ${\sim}$ 200 GB 용량의 Media 및 기록 재생 기기를 개발하고자 한다. 현재까지 이 기술의 어려움이었던 Stability 특성은 10만회 재생 내구성을 확인하엿고 CNR (신호 대 잡음 비) 특성은 50 nm 미세 마크에 대하여 40 dB의 특성을 확보 하였다. 이 특성은 대략 75 GB에 대응하는 것으로 BD System을 그대로 사용하면서 달성한 세계 최고의 기록 밀도로 평가된다. 향후 과제는 Jitter. Error Rate등 실제 신호 특성의 확보로서, 이의 확보를 통하여 기술의 상품화 가능성이 확인될 것이다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.235-239
• /
• 1996

In recent years, the optical properties of multiple-scattering media like tissue have been studied for their potential applications in medicine. In this work the optical properties of multiple scattering media were investigated using the time-resolved reflectance measurement. The reflected light was measured by time-correlated single photon counting system. The transport scattering and absorption coefficient are related to the initial rapid decay and the subsequent decay in reflected light, respectively. Also the optical properties of the samples were measured by conventional method, ie., using continuous wave light. When the distance between the light source and the detector is over 8mm, the optical coefficient can be measured accurately using the suggested method.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.229-236
• /
• 1995

Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1004-1008
• /
• 2003

Near-filed optical storage using cantilever aperture tip is a promising way fer next generation optical data storage. To enhance the speed of reading and writing data, gap between tip and media should be controlled fast and precisely within near field region. In this paper, several PZT actuators are analyzed far constructing dual servo control algorithm: coarse actuators(stact. PZT, bimorph PZI) for media surface inclination and One actuator(film PZT) for media surface roughness. Dynamic analysis of stack PZT, bimorph PZT, and film PZT are performed through the frequency response. Based on the frequency response and mathematical model, fast analog controller is designed.

• Journal of the Optical Society of Korea
• /
• 제9권4호
• /
• pp.151-156
• /
• 2005

A spatial-domain Fourier Transform (FT) infrared (IR) spectrometer coupled with a PtSi Schottky­barrier IR detector plane was developed in the spectral range of $2.0-2.5{\mu}m$ for noninvasive measurement of analyte concentrations in cell culture media during cell culture processing. A key optical component of the spectrometer is a Savart plate which is a birefringent polarizer generating coherent two rays for interfering. The spectral resolution of the spectrometer was determined as $71cm^{-1}$ (${\~}0.05{\mu}m$ at $2.5{\mu}m$). Clear IR fringe patterns were imaged on the IR detector plane. The feasibility of the spectrometer for our application was investigated by measuring absorbance spectra of glucose and fetal bovine serum (FBS) which are important compounds in cell culture media. Experiment results show that the spectral quality of glucose and FBS was comparable with the standard spectra acquired with a commercial FT-IR spectrometer, presenting the feasibility of the spectrometer to perform analyte measurement in cell culture media.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.32-36
• /
• 2014

A tangible floating display that can provide different perspective views without special glasses being introduced. The proposed system can display perspective floating images in the space in front of the system with the help of concave mirrors. In order to avoid wearing special equipment to interact and deliver the sense of touch, the proposed system adopted an ultrasound focusing technology. For providing an immersive experience to the viewers, the proposed system consists of a tangible floating display system and a multiple-view imaging system for generating three lenticular displays in front of the users.

• ETRI Journal
• /
• 제35권2호
• /
• pp.245-252
• /
• 2013

In this work, we study the physical layer solutions for 10-gigabit-capable passive optical networks (PONs), particularly for an optical link terminal (OLT) including a 10-Gbit/s electroabsorption modulated laser (EML) and a 2.5-Gbit/s burst mode receiver (BM-Rx) in a novel bidirectional optical subassembly (BOSA). As unique features, a bidirectional mini-flat package and a 9-pin TO package are developed for a 10-gigabit-capable PON OLT BOSA composed of a 1,577-nm EML and a 1,270-nm avalanche photodiode BM-Rx, including a single-chip burst mode integrated circuit that is integrated with a transimpedance and limiting amplifier. In the developed prototype, the 10-Gbit/s transmitter and 2.5-Gbit/s receiver characteristics are evaluated and compared with the physical media dependent (PMD) specifications in ITU-T G.987.2 for XG-PON1. By conducting the 10-Gbit/s downstream and 2.5-Gbit/s upstream transmission experiments, we verify that the developed 10-gigabitcapable PON PMD prototype can operate for extended network coverage of up to a 40-km fiber reach.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.558-563
• /
• 1995

Dynamic characteristics of TbFeCo magneto-optical recording media at 680nm wavelength region were studied by means of computer simulation of disc structure and optimization of process variables during sputter deposition. With the slightly reduced Kerr rotation angle due to the reduced wavelength of optical laser source, the improved recording density in TbFeCo magneto optical media showing the CNR greater than 50dB could be achieved by only adjusting the thickness of dielectric and the recording layers when the wavelength of light source is changed from 780nm to 680nm. In addition, the recording power margin of 5mW and the 2mW minimum recording power was realized, It was shown from the present study that the increase in laser power density demonstrated feasibility of low cost and low power laser diode with the reduced optimum recording power.