• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1259-1261
• /
• 1993

Amorphous chalcogenide glasses are highly transparent in the near $1{\mu}m$ wavelength region, which corresponds to the wavelength region of the optical communication system. Optical properties of these materials, including the transmittance, the optical gap, and the shift associated with reversible photostruction change, were measured. Thereafter, optical waveguide was fabricated by the laser lithographic technique and then, guide modes were measured by utilizing the end-fire coupling technique. The field patterns of both the single mode and the multimode waveguide were observed.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.7-12
• /
• 2014

A transparent poly methyl methacrylate (PMMA) optical micro-pyramid array-pattern is designed and fabricated using an injection modeling technique. The device's optical characteristics are tested and analyzed theoretically. In the optical pattern generated using the fabricated PMMA pattern, the components, due to not only refraction but also diffraction, are observed simultaneously. Wave optic modeling and analysis reveals that the energy ratio between the diffraction and refraction in the optical pattern are dependent on the critical dimension of the optical pattern such that the refraction and diffraction tend to be directly and inversely proportional to the pattern dimension, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.135-135
• /
• 2003

The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.198-200
• /
• 2014

100 nm thick Ga doped ZnO (GZO) thin films were deposited with RF magnetron sputtering on polyethylene terephthalate (PET) and ZnO coated PET substrate and then the effect of the ZnO thickness on the optical and electrical properties of the GZO films was investigated. GZO single layer films had an optical transmittance of 83.7% in the visible wavelength region and a sheet resistance of $2.41{\Omega}/{\square}$, while the optical and electrical properties of the GZO/ZnO bi-layered films were influenced by the thickness of the ZnO buffer layer. GZO films with a 20 nm thick ZnO buffer layer showed a lower sheet resistance of $1.45{\Omega}/{\square}$ and an optical transmittance of 85.9%. As the thickness of ZnO buffer layer in GZO/ZnO bi-layered films increased, both the conductivity and optical transmittance in the visible wavelength region were increased. Based on the figure of merit (FOM), it can be concluded that the ZnO buffer layer effectively increases the optical and electrical performance of GZO films as a transparent and conducting electrode without intentional substrate heating or a post deposition annealing process.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 광학 및 양자전자학 워크샵
• /
• pp.87-93
• /
• 1990

Estimation and collection of the suitable recording materials are important for the fabrication of the holographic optical elements. In this study, silver halide emulsion, photoresist and dichromated gelatin are selected as a recording materials to investigate the properties and processing methods. Some parameters which affect the diffraction efficiencies of the holographic optical elements (HOE) are presented. As an example of the HOE, the results of design and the fabrication method of the off axis 12P hologram lens are also presented.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.148-149
• /
• 2006

TFT-LCD BLU has been remarkably developed for a recent few years as TFT-LCD market is increased. Recently new BLU technologies and components are developed as more aggressively than before since TFT-LCD panel requires higher quality and resolution. Especially Samsung Electronics and LG Philips LCD of Korea are major LCD panel makers and the major optical materials of LCD BLU and panel for Samsung Electronics have been supplied by Samsung Cheil Industries. In this presentation introduction to main components of LCD BLU will be investigated details. Also characteristics and applications of optical polymers such as PMMA, PET etc for LCD display will be included and finally recent trends in optical materials for LCD BLU will be shown briefly.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.194-197
• /
• 1995

In this study, we performed a modeling for $K^{+}$ ion-exchanged diffused channel waveguide and waveguide-type optical coupler by WKB(Wentzel-Kramer-Brillouim) dispersion equation, field distribution equation of mode and coupled mode theory, and examined the optical-power-dividing of the optical coupler fabricated by using the modeling condition. The optical-power-dividing was observed at the waveguide-type optical coupler with 3[$\mu\textrm{m}$] line-width, 6[$\mu\textrm{m}$] space between channel waveguides, and 3[mm] interaction length.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.266-269
• /
• 2003

TFT LCD mode has some well-documented performance limitations, namely limited viewing angle, inversion of the gray scale levels and poor luminance efficiency because of the necessity of using crossed polarisers attached to the display cell. During the last few years many initiatives have been undertaken to solve these problems by incorporation birefringent films of various designs into the LCD module. Controlling the optical performance of LCDs often requires combination of liquid crystal material properties, cell parameters and optical films. Such optical films have traditionally been made with stretched polymer materials such as polycarbonate, but recently coated liquid crystalline materials have been used to give improved optical films which can greatly enhance the performance of LCDs. We have now developed reactive mesogen materials to add ultra-thin optical layers into the display structure, and these allow the potential for many new applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.529-532
• /
• 2003

Machining technique for optical crystals with single point diamond turning tool is reported in this paper. The main factors influencing the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability. The traditional machining method is polishing which has many shortcomings such as low production efficiency. poor ability to be automatically controlled and edge effect of the workpiece. The purpose of our research is to find the optimum machining conditions for ductile cutting of optical crystals and apply the SPDT technique to the manufacturing of ultra precision optical components of brittle materials. As a result. the surface roughness is good when spindle speed is 200m/min. and teed rate is small. The influence of depth of cut is very small.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.125-131
• /
• 2017

We propose a new graphical method for selecting a pair of optical and housing materials to simultaneously athermalize and achromatize an LWIR optical system. To have a much better opportunity to select the IR glasses and housing materials, an athermal glass map is expanded by introducing the DOE with negative chromatic power. Additionally, from the depth of focus in an LWIR optical system, the tolerable housing boundary is provided to realize an athermal and achromatic system even for not readily available housing material. Thus, we can effectively determine a pair of optical and housing materials by reducing the thermal shift to be less than the depth of focus. By applying this method to design a night vision camera lens, the chromatic and thermal defocuses are reduced to less than the depth of focus, over the specified waveband and temperature ranges.