• 한국항해학회지
• /
• 제16권2호
• /
• pp.21-27
• /
• 1992

Shortening the lasing wavelength(particularly below infrared ; the visible region) of laser diodes is very attractive because it can provide a wide range of applications in the fields of optical information, measurement, sensor, the development of medical instrument, and optical communication through plastic fibers. According to the recent researches on the field, InGaAsP/GaAs was suggested as a material for red-light laser. In this study, in order to grow InGaAsP/GaAs epitaxial layer on InGaAsP/GaAs by LPE, we used GaP and InP two phase solution technique for 670nm and 780 nm region, respectively. Through the X-ray diffraction measurement for the epitaxial layer grown from the experiments, we found that the lattice mismatch of $In_{0.46}Ga_{0.54}As_{0.07}P_{0.93}$/GaAs and $In_{0.19}Ga_{0.81}As_{0.62}P_{0.38}$/GaAs was about +0.3% and +0.1%, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.33-41
• /
• 2003

The optical properties of $ZnS_ySe_{1-\chi-y}:Te_{\chi}(\chi<0.08,y~0.11)$ alloys grown by molecular beam epitaxy (MBE) have been investigated by photoluminescence (PL) and PL-excitation (PLE) spectroscopy. Good optical properties and high crystal quality were established with lattice match condition to GaAs substrate. At room temperature, emission in the visible spectrum region from blue to green was obtained by varying the Te content of the ZnSSe:Te alloy. The efficient blue and green emission were assigned to $Te_1 and Te_n(n\geq2)$cluster bound excitons, respectively. Bright green (535 nm) and blue (462 nm) light emitting diodes (LEDs) have been developed using ZnSSe:Te system as an active layer. The turn-on voltage of 2.1 V in current-voltage characteristics is very small compared to that of commercial InGaN-based LEDs (>3.4 V), indicating the formation of a good ohmic contact due to the optimized p-ZnSe/p-ZnTe multi-quantum well (MQW) superlattice electrode layers.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.303-307
• /
• 2007

ZnO thin films were prepared by pulsed laser deposition on amorphous fused silica substrates at different ambient $O_2$ pressures varying from 0.5 to 500 mTorr, to observe the effect of ambient gas on their crystalline structure, morphology and optical properties. Results of X-ray diffraction, scanning electron microscopy, atomic force microscopy and photoluminescence studies showed that crystallinity, surface features and optical properties of the films significantly depended on the oxygen background pressure during growth. A low oxygen pressure (0.5 mTorr) seems to be suitable for the growth of highly c-axis oriented and smoother films possessing a superior luminescent property. The films grown at the higher $O_2$ pressures (50-500 mTorr) were found to have many defects probably due to an excessive incorporation of oxygen into ZnO lattice. We speculate that the film crystallinity could be affected by the kinetics of atomic arrangement during deposition at the higher oxygen pressures.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1814-1818
• /
• 1989

The crystals of ZnGa2S4 and ZnGa2S4:Co(2mole%) were synthesized from high-purity (99.999%) elements of Zinc, Gallium, and sulfur. The crystal structure of these crystals belong to a tetragonal system with layer type and the lattice constants are a =5.35\ulcorner c=10.43\ulcornerfor ZnGa2S4: Co(2 mole%) crystal at 298\ulcorner. The optical absorption spectra of these compounds were obtained through reflectance measurements using a 60 mm diameter intergrating sphere. The optical energy gaps are 3.18eV for ZnGa2S4 and 2.60eVfor ZnGa2S4:L Co(2mole%)at 298\ulcorner, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1496-1499
• /
• 2001

Optical and electrical properties of the $In_2Se_3$ single crystals grown by use of the Bridgman technique were examined in the transition temperature range between $\alpha$-phase and $\beta$-phase. $In_2Se_3$ single crystal has the rhombohedral structure and lattice constants are a=4.025 $\AA$, c=28.771 $\AA$ in C-axis. The transition temperatures of the stoichiometric $In_2Se_3$ single crystal is $10^{-2}{\Omega}cm^{-1}$ according to the specimens. However it varies rapidly in the transition region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.156-156
• /
• 2008

Single crystal of $In_2S_3$ and $In_2S_3:Co^{2+}$ were grown successfully with a good quality by the CTR(Chemical Transport Reaction)method. XRD analysis showed that the grown In2S3 and $In_2S_3:Co^{2+}$ single crystals were cubic structure. The optical absorption spectra of $In_2S_3:Co^{2+}$ single crystal showed impurity absorption peaks due to cobalt impurity. These impurity absorption pesks were assigned to the ligand transition between the split energy levels of $Co^{2+}$ ions with $T_d$ symmetry of these semiconductor host lattice.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.237-238
• /
• 2007

A new strain analysis model, so called the stress matched model, in an epitaxial multilayer system is proposed. The model makes it possible to know the strain, the stress, the elastic strain energy in each epitaxial layer. Analytical formulas of strain parameters in each epitaxial layer are derived under assumptions that the substrate thickness is finite and the in-plane lattice constant is the same for all epitaxial layers for dislocation free growth. As an example, the model is applied to a 405nm InGaN/InGaN multiple quantum well laser diode. Analysis result shows that AlxGa1-xN layer with Al mole fraction of 0.06 and the thickness of 6${\mu}m$ is one of good templates for a laser. In fact, this layer structure coincides with experimentally optimized one.

• 대한전자공학회논문지SD
• /
• 제42권9호
• /
• pp.19-28
• /
• 2005

특정한 각으로 입사하는 가간섭인 평행광선들에 의한 간섭무뉘는 1차원 정보로서 표현되는 회절격자와 흡사한 홀로그램을 구성하며, 이러한 홀로그램을 1차원 홀로그램이라 제안한다. 1차원 홀로그램을 이용하여 표시장치의 구성이 가능하며, 간단한 광 컴퓨팅구조로서 빠르게 간섭무늬를 계산할 수 있다. 이러한 표시장치를 구성하는 방법을 제시한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.170-173
• /
• 2006

[ $CuInS_2$ ] filims were appeared from 0.84 to 1.27 of Cu/In composition ratio and sulfur composition ratios of $CuInS_2$ thin films fabricated, Also when Cu/In composition ratio was 1.03, $CuInS_2$ thin film with chalcopyrite structure had the highest XRD peak (112). And lattice constant (a) of and grain size of the film tin s ambient were appeared a little larger than those in only Vacuum The films in S ambient were p-type with resistive of around $10^{-1}{\Omega}cm$ and optical energy band gaps of the films in S ambient were appeared a little larger than those in only Vacuum. Analysis of the optical energy band gap of $CuInS_2$ thin films a value of 1.53eV.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.283-287
• /
• 2014

Square lattice nano-hole arrays with diameters and periodicities of 200 and 500 nm, respectively, are fabricated on InGaN/GaN blue light emitting diodes (LEDs) using electron-beam lithography and inductively coupled plasma reactive ion etching processes. Cathodoluminescence (CL) investigations show that light emission intensity from the LEDs with the nano-hole arrays is enhanced compared to that from the planar sample. The CL intensity enhancement factor decreases when the nano-holes penetrate into the multiple quantum wells (MQWs) due to the plasma-induced damage and the residues. Wet chemical treatment using KOH solution is found to be an effective method for light extraction from the nano-patterned LEDs, especially, when the nano-holes penetrate into the MQWs. About 4-fold CL intensity enhancement factor is achieved by the KOH treatments after the dry etching for the sample with a 250-nm deep nano-hole array.