• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.149-155
• /
• 1996

In this paper, we designed binary phase grating with SA (simulated annealing) algorithm for image generation, and used LCTV(liquid crystal television) as phase modulator. We generated optical image using LCTV which controlled by personal computer in real time. Many parameters in SA algorithm are determined by average deviation of the cost function, not experimental method. It was confirmed that the LCTV could be used as a phase modulator through mach-zehnder interferometering experiment. The various optical images are generated in real itme by fourier transforming of the phase gratings on LCTV which is controlled by personal computer and they can be used for optical interconnection in a neural network and addressing information in a volume hologram etc.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.125-131
• /
• 1996

In this paper, we introduced the BQBPH method for making the grating of high efficiency which was improtant in implementing optical PS. The pattern of graing was obtianed by computer simulations using iterative method, and the diffraction efficeincy of designed grating was about 67% through BPM simulation. The grating was fabricated by laser beam writer, and the diffraction efficiency BPM simulation. The grating was fabricated by laser beam writer, and the diffraction efficiency was 47%. We implemented the optical PS with the grating and showed that optical experimental output patterns were good agreement with PS output patterns and first order was main diffraction order.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.822-829
• /
• 2000

본 논문에서는 무선광열에서 잡음광의 영향을 소거하는 동시에, 신호광원의 미세한 정렬변동에 의하여 빔의 진행방향이 이동할 경우 발생하는 출력전압의 변동을 막기 위한 자동정렬형 차동검출기를 개발하여 소개한다. 이 구조에서는 신호빔과 수직한 포토다이오드 배열을 사용하여 빔의 중심위치를 감지하고, x축과 y축에 해당하는 모토를 구동한다. 포토다이오드배열은 자신의 위치가 항상 신호빔의 중심에 오도록 자동적으로 조절하는 동시에 차동검출방식으로 잡음광의 영향을 소거하는 기능을 가지므로 무선광연결에서 매우 유용하게 쓸수 있다.

• 전자공학회논문지D
• /
• 제36D권7호
• /
• pp.66-79
• /
• 1999

본 논문에서는 얕은 양자 우물(extremely shaliow quantum wells, ESQWs)을 사용한 광 쌍안정 대칭형 자기 전광 소자(symmetric self elctrooptic effect device, S-SEED)의 성능에 있어서 높은 입사 광전력의 영향을 조사한다 . 다음과 같은 네 가지 ESQWs S-SEED 구조를 고려하였다. 무 반사 입힘(AR-coated) ESQWs S-SEED, back-to-back ARcoated ESQWs S-SEED, 비대칭 공명구조(AFP) ESQWs S-SEED, back-toback AFP ESQWs S-SEED. 입사 광 전력이 증가함에 따라 On/Off 대조비, On/Off 반사율 차이와 같은 소자성능은 ohmic heating 과 여기자 포화(exciton saturation)의 영향으로 심각하지 않게 저하된다. 한편 소자의 스위칭 속도는 지속적으로 증가하다가 특정 입사 광 전력 하에서 점차 감소하기 시작한다. 직렬 광 연결 시스템(cascading optical interconnection system)에 있어서 소자의 최대 속도 스위칭 동작을 위한 최대 입사 광 전력의 최적화를 바탕으로 0 V와 5 V의 외부 전압 조건에서 양자우물의 수를 변화시키면서 $5{\times}5{\mu}m^2$의 mesa 영역에 대하여 네 가지 ESQWs S-SEED의 시스템 비트 레이트를 모의 실험하고 그 결과를 분석하였다.

• 대한전자공학회논문지
• /
• 제26권5호
• /
• pp.79-84
• /
• 1989

신경회로의 이차 비선형 연상기억모델을 광학적으로 구현하였다. 이 때 신경소자들 간의 가중 $N^3$연결은 광벡터-행렬 곱셈기와 연결홀로그램으로 실현하였고 구성된 시스템이 연상기억작용을 나타냄을 관측하였다.

• ETRI Journal
• /
• 제17권2호
• /
• pp.1-10
• /
• 1995

We propose a novel planar optical interconnection scheme for 100 Gb/s optical packet address detection, which consists of waveguide grating couplers and a diffractive microlens integrated on a glass substrate 3-dimensionally. Length and duty cycle of the grating couplers have been determined on the bases of the ray-optic propagation-mode analysis in a slab waveguide and of the rigorous coupled-wave diffraction analysis for out-coupled radiation-modes. The 3-dimensionally integrated planar optics makes it possible to connect each address bit-signals of $TE_ 0-waveguide$ mode to the detector with a power uniformity of 6.4 % and a total coupling efficiency of 72.3 %.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.286-287
• /
• 2000

최근에 광연결(optical interconnection)을 위한 목적으로 LiNbO$_3$(0.03 mol% Fe doped)결정에 광굴절(photorefractive) 도파로를 기록하는 방법이 소개되고$^{(1-2)}$ 있는데 제작 방법과 원리는 다음과 같다. 17mW 출력의 He-Ne 레이저광을 렌즈로 통과시켜 빔의 크기를 줄인 후 초점은 LiNbO$_3$크리스털에 입사하는 반대편 면에 맞추어 입사시킨다. 그림 1에서 +y방향으로 초점이 입사면을 통과할 때까지 크리스털을 이동시켜 도파로를 만든다. 이 때 이동하는 방법은 10ms 노광시킨 후 15$mu extrm{m}$씩 불연속적으로 움직여 나간다. (중략)

• Macromolecular Research
• /
• 제12권5호
• /
• pp.474-477
• /
• 2004

We present simple, low-cost methods for the fabrication of polymeric waveguides that have large core sizes for use as optical interconnects. We have used both hot embossing and micro-contact printing techniques for the fabrication of multimode waveguides using the same materials. Rectangular and large-core (60${\times}$60 $\mu\textrm{m}$$^2$) channels were readily prepared when using these methods. The dimensions of the embossed and printed channels were the same as those of the pattern on the original master. The polymeric waveguides that we fabricated with large core sizes exhibited a low propagation loss of 0.1 dB/cm at 850 nm, which indicates that hot embossing and micro-contact printing are suitable techniques for the fabrication of optical waveguides having large-core.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.61-69
• /
• 1994

For distortion-invariant recognition of Korean characters, a holographic implementation of an optical associative memory system is proposed. The structure of the proposed system is a single-layer neural network employing interconneclion matrix, thresholding and feedback. To provide the interconnection matrix, we use two CGII's which are placed on intermcdiate plane of cascaded Vander Lugt corrclators to form an optical memory loop. The holographic correlator stores reference images in a hologram and retrives them in a coherently illuminated feedback loop. An input image which maybe noisy or incomplete, is applicd to the system and simultaneously correlated optically with all of the stord images. These correlations are throsholed and fed back to the input, where the strongest correlation reinforces the input image. The enhanced image passes arround the loop repeatedly, approaching the stored image more closely on each pass until the system stabilizes on the desired image. The computer simulation results show that the proposed Korean Character recognition algorithm has high discrimination capability and noise immunity.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.75-80
• /
• 2017

The use of optical fiber makes it possible to transfer a large amount of data, thereby enabling a high-speed image transmission with a high response speed and a large number of frames. The need for an optical fiber HDMI System has grown in importance due to the rapid development of displays with large sizes and high-resolution images. In this paper, we have studied the structural design and FEM analysis of a 4C fiber guide for hybrid interconnection implementation. According to the structural analysis of the fiber guide, we have confirmed the safety of the design and we will make additional design changes to minimize the optical loss and fabricate a fiber guide for photoelectric composite HDMI in the future.