• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.22-29
• /
• 2022

In this study, an automatic marking system for fabric inspection machines was developed. The main objectives of the study were to promote intelligence and automation for the inspection process, as well as to increase textile industrial productivity. Generally, when a worker manually inspects and marks a fabric, human error and reduced efficiency are unavoidable. To overcome these problems, we developed an automatic marking system that uses robots. This system incorporates a vision camera to automatically recognize defects, and an optical fiber sensor to detect the side of the fabric. To verify the performance, the control system sends a command directly to the robot to mark the fabric. Finally, the actual production confirmed that the proposed system could perform the desired motion.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.399-403
• /
• 2001

One of the most important factors for a leather quality inspection is its surface condition. So far, a leather quality level has been discriminated by human's eye inspection. But, these kinds of method needs a lot of labor time and cause decision mistakes from an optical illusion. It means leather quality inspection is very subjective and there is no consistency. In this study, we present computer vision based a leather quality inspection system using an Artificial intelligence. Suggested system can give standard spec for a leather quality and take human inspection duty place.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2179-2182
• /
• 2005

Recently, optical 3D scanners are frequently used for inspection of parts, assembly and manufacturing tooling. One of the advantages is being able to measure a large area fast and accurately. Owing to recent advances in high-resolution image sensing technology, high power illumination technology, and high speed microprocessors, the accuracy and resolution of optical 3D scanners are being improved rapidly. In order to measure the entire geometry of objects, multiple scans have to be performed in various setups by moving either the objects or the scanner. This paper introduces novel methods to measure the entire geometry of objects by automatically changing the setups and then aligning the scanned data in a single coordinate system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.480-483
• /
• 1997

In this paper, we have proposed an automatic inspection system for cracks on the surface of a structure. The proposed system consists of the imaging system and the veh~cle system. The imaging system. a set of optical sensor, lens, illuminator, storage and their configuration, images the scene and store it on the hard disk. We adopted a linescan camera of 5000 pixel density to achieve high resolution without loss of simplicity. The vehicle system that moves the optical system IS ~mplemented by an AGV. The AGV moves forward at constant velocity and avoid obstacles to acquire a stable image. We have cmplemented an experimental system and have acquired images of the wall of hallway. The image is of 0.1-mmipixel resolution and the scanning time IS about 1 mlsec. The allow able scan.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.365-366
• /
• 2007

Micro jetting drop inspection system is essential to measuring micro drop volume. Measuring pico-liter drop volume is useful for new LCD color filter product process that is based on inkjet printing technology. To upgrade the reliability in drop measurement system, we use the auto focusing & multi drop reiteration & blurring average algorism. First of all we used standard mark for gage R&R in the vision system. Finding the most suitable threshold for multi blurring drop, is the main key of this research. Sensitivity of vision system is a standard in measuring the upgrade system level. So, suitable threshold can upgrade the performance of jetting drop inspection system.

• IE interfaces
• /
• v.21 no.2
• /
• pp.151-160
• /
• 2008

Defect size distribution is a probability density function for the defects that occur on wafers or glasses during semiconductor/LCD fabrication. It is one of the most important information to estimate manufacturing yield using well-known statistical estimation methods. The defects are detected by automatic optical inspection (AOI) facilities. However, the data that is provided from AOI is not accurate due to resolution of AOI and its defect detection mechanism. It causes distortion of defect size distribution and results in wrong estimation of the manufacturing yield. In this paper, I suggest a size conversion method and a maximum likelihood estimator to overcome the vague defect size information of AOI. The methods are verified by the Monte Carlo simulation that is constructed as similar as real situation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.164-169
• /
• 2002

Recently, LCD(Liquid Crystal Display) is the display product widely used on various fields of industry. This is generally composed of many parts. Among many parts, polarizer film control the intensity of the transmitted light according to the degree of rotation of the polarizer axis. Therefore, this film must be free from defects. But it contains many defects such as the defects caused by dust or different thing, adhesive badness, scratch. Presently, the inspection of these defects is depending on the sight of operator. In this paper, we propose the vision system composed of telecentric lens and optical mirror. This system use the coaxial illumination and the light is specularly reflected on the optical mirror. And we develop the image processing algorithm using the threshold and morphological technique.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1758-1759
• /
• 2007

본 논문에서는 표면실장기판을 위한 자동 광학 검사 시스템에서 사용되는 데이터 산출방법에 대한 알고리즘을 제안 한다. 제안된 새로운 부품검사 알고리즘은 검사영역을 분할해 템플릿에서의 매칭률이 가장 높은 부분만을 세밀하게 재검사하는 방법을 사용하여 기존의 방법들보다 시간이 단축 될 뿐만 아니라 많은 양의 메모리를 필요로 하는 템플릿의 패턴들의 메모리 용량상의 문제점을 해결할 수 있다. 실험 결과를 제시하여 제안된 검사 알고리즘을 검증한다.