• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1072-1080
• /
• 2000

Leakage magnetic flux (LMF) is widely used for non-contact detection of cracks. The combination of optics and LMF offers advantages such as real time inspection, elimination of electrical noise, high spatial resolution, etc. This paper describes a new nondestructive evaluation method based on an original magneto-optical inspection system, which uses a magneto-optical sensor, LMF, and an improved magnetization method. The improved magnetization method has the following characteristics: high observation sensitivity, independence of the crack orientation, and precise transcription of the geometry of a complex crack. The use of vertical magnetization enables the visualization of the length and width of a crack. The inspection system provides the images of the crack, and shows a possibility for the computation of its depth.

• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1576-1581
• /
• 2005

Generally, the optical components are fabricated by grinding, lapping, and polishing. And, those processes take long time to obtain such a high surface quality. Therefore, in the case of large optical component, the on-machine inspection (OMI) is essential. Because, the work piece is fragile and difficult to set up for fabricating and measuring. This paper is concerned about a swing-arm method for measuring surface profile of large optical concave mirror. The measuring accuracy and uncertainty for suggested method are studied. The experimental results show that this method is useful specially in lapping process with the accuracy of $3\~5\;{\mu}m$. Those inspection data are provided for correcting the residual figuring error in lapping or polishing processes.

• Current Optics and Photonics
• /
• v.1 no.1
• /
• pp.45-50
• /
• 2017

Optical instruments based on polymer-dispersed liquid crystal (PDLC) have been used to inspect transparent electrodes. Generally the operating voltage of an inspection instrument using PDLC is very high, over 300 V, reducing its lifetime and reliability. The operating-voltage issue becomes more serious in the inspection of touch-screen panel (TSP) electrodes, due to the bezel structure protruding over the electrodes. We have theoretically calculated the parameters affecting the operating voltage as a function of the distance between the TSP and the PDLC, the thickness, and the dielectric constant of the sublayers when the inspection module was away from the TSP electrodes. We have experimentally verified the results, and have proposed a way to reduce the operating voltage by substituting a plastic substrate film with a hard coating layer of smaller thickness and higher dielectric constant.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.256-257
• /
• 2003

Composite materials are widely used in industry because of its high ration of strength vs. weight, and consequently many nondestructive methods have been developing to find stress or subsurface defects like crack, and delamination inside composite material. Among them, optical inspection methods have been widely neglected because of translucent or opaque nature of composite. (omitted)

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.261-268
• /
• 2014

Precision screws have a wide range of industrial applications such as electrical and automotive products. To produce screw threads with high precision, not only high precision manufacturing technology but also reliable measurement technology is required. Machine vision systems have been used in the automatic inspection of screw threads based on backlight illumination, which cannot detect defects on the thread surface. Recently, an omnidirectional inspection system for screw threads was developed to obtain $360^{\circ}$ images of screws, based on front light illumination. In this study, the illumination design for the omnidirectional inspection system was modified by adding a light shield to improve the image uniformity. Optical simulation for various shield designs was performed to analyze image uniformity of the obtained images. The simulation results were analyzed statistically using response surface method, from which optical performance of the omnidirectional inspection system could be optimized in terms of image quality and uniformity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1345-1348
• /
• 2003

The Ferrule for the Optical Communication Connector is the product to set the optical ares of an optical fiber very precisely. Therefore, it is required high expectations such as high dimensional precision and new including flaws. Up to new the optical instrument has been used for the defeat and shape inspection of the ferrule, but in the paper we examined the detectable defeat and expectation by using Resonant Ultrasound Spectroscopy(RUS). The RUS is the measurement which is to excite specimen and to inspect the difference at natural frequency pattern between acceptable specimen and specimen which has some defeats. We analyzed the difference of natural frequency pattern in the experiment using Spectrum Analyzer. And we compared the results in the experiment with those in the simulation from the explicit finite elements code, Nastran.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.223-229
• /
• 2009

This paper describes the development of a simulator which can numerically calculate an image to be acquired in a machine vision system for automated optical inspection. The simulator is based on a ray tracing technique and composed of three modules which are an illuminating system, a specimen and an imaging system. Kinds of model parameters for modules and their values are carefully chosen from the direct measurement and the observation of related phenomena. Finally, the validity of the simulator is evaluated by logical analysis and by comparison with measured images.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.480-485
• /
• 2003

We Propose a Path planning method to reduce the Inspection time of AOI (automatic optical inspection) machines in SMT (surface mount technology) in-line system. Inspection windows of board should be clustered to consider the FOV (field-of-view) of camera. The number of clusters is desirable to be minimized in order to reduce the overall inspection time. We newly propose a genetic algorithm to minimize the number of clusters for a given board. Comparative simulation results are presented to verify the usefulness of proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.772-777
• /
• 2009

The geometric distortion of image is one of the most important parameters that take effect on the accuracy of optical inspection systems. We propose a new correction method of the image distortion to increase the accuracy of PCB inspection systems. The model-free method is applied to correct the randomly distorted image that cannot be represented by mathematical model. To reduce the correction time of inspection system, we newly propose a grid reduction algorithm that minimize the number of grids by the quad-tree approach. We apply the proposed method to a PCB inspection system, and verify its usefulness through experiments using actual inspection images.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.9-18
• /
• 1998

The components with J-lead. which are more integrated and smaller than ones with Gull-wing. are rapidly being used in electronic board such as the PCB, for they have the advantage of occupying a small space compared to the other components. However, the development of inspection system for these new components is not so rapid as component development. Component-inspection with J-lead using vision system is difficult because they are hidden from camera optical axis. X-ray inspection, which has the advantage of inspecting the inside of solder state, is used to J-lead inspection. However. it is high cost and dangerous by leaking out X-ray compared to vision system. Therefore, in this paper, we design vision system suited to J-lead inspection and then propose algorithm which have flexibility in mount and rand error.