• 한국컴퓨터산업학회논문지
• /
• 제2권4호
• /
• pp.565-572
• /
• 2001

최근 고체 레이저 출력측에 비선형 광학재료를 설치하여 적외선에서 자외선에 이르기까지 넓은 대역의 파장을 가진 레이저광이 요구된다. 비선형 광학소자는 고조파발생기와 파라메터 발생기와 같은 레이저원을 이용한 주파수 전 영역까지 확장 할 수가 있다. 주파수 변환은 고전력 레이저를 이용한 확장기술에 많이 이용하고있다. 새로운 각 주파수 대역에서 광학 매개체의 비선형 광학의 응답 등을 이용할 수가 있다. 이러한 과정들은 자외선영역에서 적외선까지 고전력 방사발생을 이용할 수가 있다. 광학 파라메터발생기와 증폭기는 저주파수에서 2가지 파장 등을 발생한다. 싱글 주파수원으로부터 발생하여 몇몇의 경우에는 가시광선 영역에서 거의 자외선 영역까지 이용할 수가 있다. 결과적으로 녹색광을 얻기 위해서, 펄스형Nd:YAG 레이저는 다단펄스 포밍회로를 이용하였고 비선형광학(KTP)소자를 채택하여 적용하였다. 따라서 본 연구에서는 펄스 중첩법을 이용하여 기본파로서 직접 설계 제작 후 SHG 장치를 장착하여 녹색광을 얻고 각 중첩 메쉬에 같은 에너지를 인가했을 때의 레이저 출력과 녹색광 출력간의 상관관계와 메쉬 수에 따른 변환효율을 조사하였다.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.579-586
• /
• 2017

In this paper, we theoretically demonstrate that semiconductor optical amplifiers (SOAs) with strong wavelength dependence of gain and phase are capable of all-optical inverted and non-inverted wavelength conversion (WC) over a wide range, with the assistance of an optical filter. First, the gain dynamics and phase dynamics in a common quantum well (QW) SOA with the $In_{0.53}Ga_{0.47}As/In_{0.7322}Ga_{0.2678}As_{0.5810}P_{0.4190}$ material system are found to be strongly dependent on wavelength, which is mainly related to the wavelength dependence of the differential gain and the differential refractive-index change. Second, the wavelength dependence in an all-optical wavelength converter based on the QW SOA cascaded with a detuning band pass filter is studied. Simulations show that the quality of the converted signal has little dependence on the operation wavelength. Both inverted and non-inverted WC can be achieved, over a large wavelength range. Therefore, although the gain and phase change are strongly wavelength-dependent, the effects of this dependence can be erased by appropriate optical filtering.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1386-1392
• /
• 2009

An analysis is presented for super-high-speed optical demodulation by an avalanche photodiode(APD) with electric mixing. A normalized gain is defined to evaluate the performance of the optical mixing detection. Unlike previous work, we include the effect of the nonlinear variation of the APD capacitance with bias voltage as well as the effect of parasitic and amplifier input capacitance. As a results, the normalized gain is dependent on the signal frequency and the frequency difference between the signal and the local oscillator frequency. However, the current through the equivalent resistance of the APD is almost independent of signal frequency. The mixing output is mainly attributed to the nonlinearity of the multiplication factor. We show also that there is an optimal local oscillator voltage at which the normalized gain is maximized for a given avalanche photodiode.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.184-185
• /
• 2002

We discussed the main issues of 10GHz Receiver packaging. High frequency structure simulations and circuit simulations for TO-CANs led to a new design for 10GHz optical receiver module packaging. The simulation results were compared to the measured laboratory data. The proposed package has low cost and easy manufacture process far mass production. Using this package, we had a good optical to electrical conversion (OE) characteristic at a data rate of 10Gbps.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2189-2196
• /
• 2009

광파이버 네트웍에서 광전믹싱 광검파의 가용 주파수대역 확장을 위한 이론을 제시하고 시뮬레이션을 실시하였다. 광전믹싱 광검파의 정규화 이득을 정의하고, 검파소자의 차단주파수를 초월하는 고주파 영역의 신호도 검파가 가능함을 확인하였다. 포토다이오드 내부의 캐리어 천이에 대한 연속방정식을 풀어서 광전믹싱 현상의 메카니즘을 해석하였다. 정규화 이득은 신호주파수와 차주파수의 크기에 의존하였으나, 포토다이오드에 흐르는 광전류의 크기는 신호주파수와는 무관하였다. 신호 검파효율의 최대화를 위해서는 바이어스 전압과 국부신호의 진폭을 동시에 최적화할 필요가 있다.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.186-190
• /
• 2021

In this study, a compact, picosecond, mid-infrared 3.8 ㎛ MgO:PPLN optical parametric oscillator (OPO) laser output with high peak power is realized using a master oscillator power amplifier (MOPA) 1 ㎛ solid-state laser seeded by a picosecond fiber laser as the pump source. The pump source was a 50 MHz and 10 ps fiber seed source. After AOM pulse selection and two-stage solid-state amplification, a 1,064 nm laser output with a repetition frequency of 1-2 MHz, pulse width of 9.5 ps, and a maximum average power of 20 W was achieved. Furthermore, a compact short cavity with a unsynchronized pump is adopted through the design of an OPO cavity structure. When the injection pump power was 15 W and the repetition frequency was 1 MHz, the average output power of idler light was 1.19 W, and the corresponding peak power was 119 kW. The optical conversion efficiency was 7.93%. When the repetition frequency was increased to 2 MHz, the average output power of idler light was 1.63 W, the corresponding peak power was 81.5 kW, and the optical conversion efficiency was 10.87%. At the same time, the output wavelength was measured at 3,806 nm, and the beam quality was MX2 = 3.21 and MY2 = 3.34.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• 센서학회지
• /
• 제24권4호
• /
• pp.219-223
• /
• 2015

Indium free consisting of three alternating layers GTO/Ag/GTO has been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting electrodes and the structural, electrical and optical properties of the gallium tin oxide (GTO) films were carefully studied. The gallium tin oxide thin films deposited at room temperature are found to have an amorphous structure. Hall Effect measurements show a strong influence on the conductivity type where it changed from n-type to p-type at $700^{\circ}C$. GTO/Ag/GTO multilayer structured electrode with a few nm of Ag layer embedded is fabricated and show the optical transmittance of 86.48% in the visible range (${\lambda}$ = 380~770 nm) and quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$. The resultant power conversion efficiency of 2.60% of the multilayer based OPV (GAG) is lower than that of the reference commercial ITO. GTO/Ag/GTO multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.132.1-132.1
• /
• 2014

Fluorescent-magnetic nanoclusters were synthesized for biomedical applications. The nanoclusters consisted of superparamagnetic core-nanoclusters, highly fluorescent shell of nanocrystals, and lipid A. Magnetic cores were used for both magnetic resonance imaging (MRI) and cell separation. Fluorescent shell was used for optical imaging. The lipid-A-loaded nanoclusters were up-taken by dendritic cells via phagocytosis, which successfully activated dendritic cells. The dendritic cells were migrated to lymph nodes and spleen of mice. The results showed that our novel nanoclusters can play a role as an efficient optical and magnetic imaging, a cell separating and a pathogen mimetic agent at the same time. Additionally, synthesis of wavelength conversion nanowires will be discussed, which may be used as an optical nanoprobe in biological studies.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.694-697
• /
• 2016

Up-converted phase noise, which is induced by the low-frequency relative intensity noise (RIN) of a laser through AM-PM conversion within a photodetector (PD), is first measured here by means of a cross-correlation method. Our proposed measurement system can isolate the RIN-induced phase noise from noise contributions of other components, such as amplifiers, modulators, and mixers. In particular, shot noise and thermal noise generated from the PD are also suppressed by this method, so that standalone characteristics of the RIN-induced phase noise can be obtained. Experimental results clearly show the quantitative relationship between the RIN-induced phase noise and the incident optical power of the PD. Our findings indicate that the least RIN-induced phase noise appeared at the saturation point of the PD, which is about -162 dBc/Hz at 10 kHz offset.