• 제목/요약/키워드: Optical fiber cable

검색결과 110건 처리시간 0.045초

광간섭계의 위상변화 신호를 이용한 광케이블 식별방법에 관한 연구 (A Research about the method for the optical cable identification by using phase change signal of the optical interferometer)

  • 정현호;이용기;민경선;정호진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.105-106
    • /
    • 2006
  • It is important to identify the exact target optical cable that a worker look for when he executes a cable construction work. Until now, An Optical cable identification work has been done by a manual pulling of an optical cable or by the method of using RF signals. But these methods not only consume much time and labor costs but also have a distance limit of the optical cable to identify. In this paper, we propose a method that uses the phase change signal of the optical interferometer to identify an optical cable. With the proposed method the field worker can have an efficient tool to prevent miscutting the optical cable and can also save operating costs.

  • PDF

광MVAD(Multi-Video Audio Data)쌍방향 다채널링크시스템 설계 (Design and Construction of Fiber Optical Link Application System for Multi-Video Audio Data Transmission)

  • 이재우
    • 한국산학기술학회논문지
    • /
    • 제10권10호
    • /
    • pp.2691-2695
    • /
    • 2009
  • 오늘날 광통신 시스템은 거의 무한대의 대역폭을 지니게 되었으며 이를 통하여 다양한 멀티미디어 데이터들을 신속하게 전송하는데 사용되고 있다. 이러한 광통신 시스템 하에서 텍스트, 이미지 및 동영상 등 다양한 멀티미디어 데이터들을 송수신 하기 위해서는 통합된 통신서비스시스템의 사용이 필수적이다. 본 논문에서는 멀티 비디오데이타와 오디오 데이타를 한가닥의 광통신 라인으로 주고받을 수 있도록 해주는 광 MVAD(Multi-Video Audio Data)쌍방향 다채널 링크시스템을 개발하였다. 개발된 광링크 시스템은 오직 하나의 광케이블을 사용하여 광통신시스템을 구축 할 수 있으며 우수한 영상과 음향을 공급하는 광섬유 매개체로 인하여 다양한 분야에 적용이 가능하다.

전력선을 이용한 광케이블 현장 실증 시험 (A field trial of helically wrapping fiber optic cable onto existing 154KV Phase conductor.)

  • 신건학;이원빈;조홍근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.143-146
    • /
    • 1987
  • Fiber optics provide a solution to the problems at interference, capacity and reliability in communication. Approximately 20 kilometera of a six-fiber, multimode, longwave($1.3{\mu}m$), graded index silica glass fiber optic cable was helically wrapped around a phase conductor at a Korea Electric Power Corporation(KEPCO) 154KV transmission line. This paper presents an economic comparison of several fiber optic cable installation alternative and discusses the characteristics at the helically wrapped fiber cable, as well as the entire installation, including high voltage phase-to-ground (PTG) end termination, and splicing. The fiber link was installed for the field trial and practical use with overhead composite optical fiber cable which installation performed a few years earlier some other location and is intended to accommodate not only telephone but also supervisory Control and Data Acquisition(SCADA), protective relaying, and telemetry functions.

  • PDF

Hybrid 인터커넥션 구현을 위한 광전 복합케이블 제작에 관한 연구 (Study on the Photoelectric Composite Cable for Hybrid Interconnection Implementation)

  • 김재열;유관종;박력
    • 한국기계가공학회지
    • /
    • 제16권3호
    • /
    • pp.138-145
    • /
    • 2017
  • With the increasing use of smart electronic devices, the size of the related I/O interface market is increasing rapidly. Demand is also growing for the continuous increase of data and video signals-such as faster data processing speed and data storage capacity-in the smart electronic device input/output interface market. Currently, the POF hybrid cable used in the smart electronic device input / output interface market cannot transmit over a long distance because the optical loss is too large, and the GOF hybrid cable is both vulnerable to bending and other sudden outside changes, and expensive. Therefore, in this study, the design and fabrication of a GOF hybrid cable and fiber guide were carried out in order to develop a cable which can easily withstand external impact, has low optical losses, and meets the demand for continuous data and video signal increase in the smart electronic device input / output interface market.

스마트 폰을 이용한 광 통신망 감시 시스템 (Optical Network Monitoring System Using Smart Phone)

  • 정소기
    • 한국통신학회논문지
    • /
    • 제42권1호
    • /
    • pp.218-226
    • /
    • 2017
  • 본 논문은 스마트 폰을 활용하여 광 전송망 구간을 실시간으로 감시하는 시스템이다. 기존의 광 통신망 구간은 스마트 폰과 접속함체의 여장판에 스위치 설치를 활용하여 현장의 상황을 실시간으로 인지 하는 시스템이 없었다. 본 연구는 스마트 폰의 Application과 접속함체 스위치를 이용하여 실시간으로 유지보수를 할 수 있도록 했다. 스마트 폰 Web은 접속함체 장애 위치를 찾는데 유용하며, 접속함체 내부에 있는 여장판 벨크로 타이를 분리하면 스위치가 작동하여 심선의 밴딩을 주어서push message를 발생하게 한다. 접속함체 작업과 장애가 발생하면 스마트폰을 이용하여 OTDR측정을 하여 위치 추적을 할 수 있도록 하는 연구이다. 스마트 폰을 이용하여 실시간 광케이블 구간을 관리함으로써 장애 시간 단축과 전송망 품질을 효율적으로 유지보수 할 수 있다.

지중송전선로 광 복합 전력케이블 시스템 특성분석 (Characteristic Analysis of Power Optical Fiber Composite Cable System on Underground Transmission Lines)

  • 정채균;박흥석;장태인;강지원;김종채;이동일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.531-532
    • /
    • 2011
  • This paper describes the characteristics analysis of power-optical fiber composite cable on underground transmission lines. The effects on grounding, air gap and contact resistance are variously analysed using EMTP in normal operating condition. From these results, in this paper, the scheme for protecting the electrically abnormal phenomena will be established on power-optical fiber composite cable of underground transmission lines.

  • PDF

케이블의 곡률 측정을 위한 새로운 형태의 광섬유 마이크로벤드 센서 개발 (Novel Fiber Optic Microbend Sensor for the Measurement of Cable's Curvature)

  • 오상우;최혁진
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제12권4호
    • /
    • pp.289-295
    • /
    • 2009
  • 본 연구에서는 케이블의 굽힘 정도를 광섬유의 마이크로벤드 특성을 이용하여 측정할 수 있는 방법과 이를 적용한 실험 결과를 제시한다. 케이블의 양방향 굽힘 측정을 위해 굽힘시 동일한 강도와 크기의 마이크로벤드 현상을 광섬유에 일으킬 수 있는 새로운 형태의 구조를 설계하였고, 이를 반영한 측정 장치로 케이블의 곡률이 $0.1\;cm^{-1}$부터 $0.4\;cm^{-1}$인 범위 내에서 증가함에 따라 광신호의 크기가 감쇠함을 실험을 통해 확인하였다. 또한 제안된 센서의 분산측정 적용을 위해, OTDR을 이용하여 케이블의 곡률별로 구분된 굽힘 지점들에서 반사된 광 펄스 신호들의 크기를 측정하여 기준 측정값과의 비교를 통해 분산 센서로의 적용 가능성을 확인하였다.

  • PDF

144심용 초다심 SSLT OPGW 개발 (Development of Stainless Steel Loose Tube Optical Ground Wire with 144 Single Mode Fibers)

  • 백승엽;김경민;김성욱;김도운;이인호;손광익;이승찬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.395-398
    • /
    • 2001
  • Recently, the increasing need for internet and the activation of hiring business of communication line makes the demand for OPGW cable which can construct the optical communication network in the basis of existing overhead power transmission line. Especially, the demand is focused on the high fiber count OPGW due to high capacity transmission. In step with the trend toward high fiber count cable we have developed the Stainless Steel Loose Tube type OPGW within which have 144core firstly in KOREA. This paper describes the cable design and manufacturing process which gives the stable operation in very severe conditions and the long-term reliability test results conducted in according to dominant specification IEEE Std. 1138-1194.

  • PDF