• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.663-665
• /
• 2004

Ethernet-based passive optical network(EPON) technology is being considered as a promising solution for next-generation broadband access network. It must have the property of high efficiency, low cost, and support quality of service(QoS). A major feature for this new architecture is the use of a shared transmission media between all connected optical network unit(ONU). Hence, medium access control(MAC) arbitration mechanisms are essential for the successful implementation of EPON. In this paper we propose a simple dynamic bandwidth allocation(DBA) algorithm that improves the performance of network and supports IP-based multimedia applications with the bursty data traffic. In addition, we introduce analytic models of proposed algorithms and prove the system based on our algorithm to be asymptotically stable. Simulation results show the new DBA algorithm provides high bandwidth efficiency and low queueing delay of ONU in EPON.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.287-291
• /
• 2009

In this paper, an optical switch/modulator is designed and its light propagating characteristics analyzed using a simplified BPM. The distinctive feature of this switch/modulator is that all its waveguide branches are designed as single-mode. The principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of the fact all waveguides are designed as single-mode, by adjusting the interconnecting waveguide length'of the device the same characteristics as existing up to date devices are obtainable. Numerical results show that the switching characteristics periodically depend upon an interconnecting waveguide length with a spatial of about $150^{{\mu}m}$ in the $Ti:LiNbO_3$ step index waveguide. The design concept would therefore be utilized effectively in fabricating a monolithic high density optical integrated circuit.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1829-1834
• /
• 2008

An optical switch/modulator is designed and the light propagating characteristics is analyzed by the simplified BPM. The distinctive feature of the switch/modulator is that all the waveguide branches are designed to be single-mode. Principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of all the waveguides are designed to be single-mode, adjusting the interconnecting waveguide length of the device, the same characteristics as existing device up to date is obtainable. Numerical results show that the switching characteristics periodically depends on the interconnecting waveguide length with a spatial of about 150${\mu}m$ in the Ti:LiNbO3 step index waveguide. The concept of design would be utilized effectively in fabricating the monolithic high density of optical integrated circuit.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.49-55
• /
• 2000

The semiconductor industry relies on digital optical imaging for the overlay metrology of integrated circuit patterns. One critical performance demand in the particular application of digital imaging is placed on the edge resolution that is defined as the smallest detectable displacement of an edge from its image acquired in digital from. As the critical feature size of integrated circuit patterns reaches below 0.35 micrometers, the edge resolution is required to be less than 0.01 micrometers. This requirement is so stringent that fundamental behaviors of digital optical imaging need to be explored especially for the precision coordinate metrology. Our investigation reveals that the edge resolution shows quasi-random characteristics, not being simply deduced from relevant opto-electronic system parameters. Hence, a stochastic upper bound analysis is made to come up with the worst edge resolution that can statistically well predict actual indeterminate edge resolutions obtained with high magnification microscope objectives.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.31-38
• /
• 2001

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. In this study, the holographic panicle velocimetry system was used to measure the sizes and velocities of droplets formed by a commercial full cone spray nozzle. Uncertainty analysis was performed to identify the sources of all relevant errors and to evaluate their magnitude. The droplet velocities ranged from 10.3 to 13.3 m/s with average uncertainty of ${\pm}1.6m/s$, which is ${\pm}14%$ of the mean droplet velocity. Compared with relatively small uncertainties of velocity components in the normal direction to the optical axis, the uncertainty of the optical axis component is ${\pm}3.6m/s$. This is due to the long depth of field of droplet images in the optical axis, which is inherent feature of holographic system using forward-scattering object wave of particles.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권1호
• /
• pp.74-81
• /
• 2004

We propose a novel scheme to transmit high center frequency RF signals using electroabsorption devices (EADs) as frequency converters at the transmitter and the receiver. In this approach frequency heterodyning is employed for obtaining high center frequency. With the EAD as a detector/mixer at the receiver we demonstrated a smaller conversion loss than that of the conventional modulator/mixer. With EAD as a modulator/mixer at the transmitter and with two heterodyned lasers to generate an optical local oscillator (LO), we demonstrated a large reduction (${\sim}23dB$) in conversion loss, and the transmission is not limited by the optical saturation of the EAD. This transmission scheme has optical single-side-band transmission feature which greatly relieves the fiber dispersion effect.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2021년도 추계학술발표대회
• /
• pp.878-879
• /
• 2021

Most state-of-the-art CNNs for action recognition are based on a two-stream architecture: RGB frames stream represents the appearance and the optical flow stream interprets the motion of action. However, the cost of optical flow computation is very high and then it increases action recognition latency. We introduce a design strategy for action recognition inspired by a two-stream network and teacher-student architecture. There are two sub-networks in our neural networks, the optical flow sub-network as a teacher and the RGB frames sub-network as a student. In the training stage, we distill the feature from the teacher as a baseline to train student sub-network. In the test stage, we only use the student so that the latency reduces without computing optical flow. Our experiments show that its advantages over two-stream architecture in both speed and performance.

• 대한원격탐사학회지
• /
• 제34권6_2호
• /
• pp.1215-1227
• /
• 2018

해빙의 이동은 지역적 분포뿐만 아니라 해빙의 생성 및 두께에도 영향을 미치기 때문에 해빙의 변화를 평가하는 데에 중요한 정보가 된다. 이 연구에서는 북극해 해빙의 이동 특성 탐지를 위해 Korea Multi-Purpose Satellite-2(KOMPSAT-2)와 Korea Multi-Purpose Satellite-3(KOMPSAT-3)의 두 위성 센서로부터 다중 시기 고해상도 광학 위성 영상을 획득하고, SIFT(Scale-Invariant Feature Transform), SURF(Speeded Up Robust Features) 및 ORB(Oriented FAST and Rotated BRIEF)의 특징점 추적 기법을 적용하였다. 두 위성 센서에서 획득된 영상의 활용을 위해 전처리 단계에서 공간해상도와 방사해상도를 일치시킨 후 특징점 추적 기법을 적용한 결과 SIFT의 경우 영상 전반에 걸쳐 특징점의 고른 공간 분포가 나타났고, SURF의 경우 해빙과 해양의 경계 부분에 특징점이 주요하게 분포하는 경향이 관찰되었으며 이러한 경향은 ORB에서 가장 현저하게 나타났다. 특징점 추적 기법별 연산 시간 측정 결과 SIFT, SURF 및 ORB의 순서로 연산 시간이 감소하였다. ORB의 경우 SIFT 기법 대비 추적된 특징점 수가 평균 59.8%로 줄어들었지만 연산 시간은 평균 8.7%에 해당하는 시간이 소요되어 해빙 이동 특성의 고속 탐지에 적합한 기법으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.9-9
• /
• 2000

Accurate counting and packaging pills is one of the most fundamental works of the pharmaceutical industry. But it is so labor consuming and very hard to be automated. As the pharmaceutical industry is growing bigger, the need of counting and packaging automation is increasing to obtain effective mass production. Precise and quick sensing is required in the counting and processing of quickly dropping pills to improve the productivity. There are many trials for this automation and automatic machine. But the performance of the existing counting machine varies with the size, shape and the dispersion degree of pills In this research, authors design the counting and packing machine of medicinal pills that is more accurate and highly trustworthy After getting analog signal from optical sensor, pill passage is discriminated from chosen characteristic feature using microprocessor.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.237-247
• /
• 2023

In middle- and long-distance imaging systems, due to the atmospheric turbulence caused by temperature, wind speed, humidity, and so on, light waves propagating in the air are distorted, resulting in image-quality degradation such as geometric deformation and fuzziness. In remote sensing, astronomical observation, and traffic monitoring, image information loss due to degradation causes huge losses, so effective restoration of degraded images is very important. To restore images degraded by atmospheric turbulence, an image-restoration method based on improved compound multibranch feature fusion (CMFNetPro) was proposed. Based on the CMFNet network, an efficient channel-attention mechanism was used to replace the channel-attention mechanism to improve image quality and network efficiency. In the experiment, two-dimensional random distortion vector fields were used to construct two turbulent datasets with different degrees of distortion, based on the Google Landmarks Dataset v2 dataset. The experimental results showed that compared to the CMFNet, DeblurGAN-v2, and MIMO-UNet models, the proposed CMFNetPro network achieves better performance in both quality and training cost of turbulent-image restoration. In the mixed training, CMFNetPro was 1.2391 dB (weak turbulence), 0.8602 dB (strong turbulence) respectively higher in terms of peak signal-to-noise ratio and 0.0015 (weak turbulence), 0.0136 (strong turbulence) respectively higher in terms of structure similarity compared to CMFNet. CMFNetPro was 14.4 hours faster compared to the CMFNet. This provides a feasible scheme for turbulent-image restoration based on deep learning.