• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.229-236
• /
• 1995

Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.208-213
• /
• 2006

The present state of the design of swing arm actuators for optical disc drives is to obtain the high efficient dynamic characteristics within a very compact volume. As a necessary consequence, the need of the small form factor (SFF) storage device has been arisen as major interests in the information storage technology. In this paper, we suggest the miniaturized swing arm type actuator that has high efficient dynamic characteristics for SFF optical disk drive (ODD). For the operating mechanism, it uses a tracking electromagnetic (EM) circuit for a focusing motion together. Moreover, due to the size constraint, the thermal stability of optical head is important. Therefore, the actuator is designed to emit the heat, which is generated by optical pick-up, along the actuator body easily. Initial model is designed based on the topology optimization method considering the thermal conductivity. Then, the structural parts of the actuator are modified to maintain the high sensitivity and to have wide control bandwidth by the design of experiments method (DOE) and new concept of decreasing mass and inertia. Finally, a swing arm type actuator for SFF ODD is suggested and its dynamic characteristics are verified.

• 전자공학회논문지SC
• /
• 제45권3호
• /
• pp.32-41
• /
• 2008

본 논문에서는 blu-ray 디스크 드라이버의 트랙킹 서보시스템에 대하여 플랜트와 제어기의 불확실성을 보상하는 견실비약성 $H^{\infty}$ 상태궤환 제어기 설계방법을 제안한다. 플랜트와 제어기의 불확실성을 매개변수화 선형행렬부등식(PLMI: parameterized linear matrix inequality)을 이용하여 구조화된 불확실성의 형태로 표현하며, Lyapunov 함수를 이용하여 구조적인 제어기의 이득섭동을 고려한 견실비약성 $H^{\infty}$ 상태궤환 제어기가 존재할 충분조건 및 제어기 설계방법을 PLMI의 형태로 제안한다. 또한, 완화기법(relaxation technique)을 통하여 PLMI를 유한개의 LMI의 형태로 변환하여 견실하고 최적화된 제어기 이득과 제어기 섭동 범위를 계산하고, 모의실험을 통해서 제시된 제어기의 타당성 및 견실성(robustness)과 비약성(non-fragility)을 검증한다.

• 한국통신학회논문지
• /
• 제31권11C호
• /
• pp.1052-1057
• /
• 2006

본 논문에서는 고밀도 광기록 장치에서 발생하는 디스크 기울임 현상으로 인한 검출 성능 저하를 방지하기 위해서 디스크 기울임 분석기를 갖는 적응 등화 PRML 검출 방법을 VerilogHDL을 이용하여 구현하였다. 디스크 기울임의 분석을 위하여 고정된 패턴으로 일정한 간격마다 반복되는 동기 데이터를 이용하여 분석된 디스크의 기울임 정도를 측정하여 ROM에 저장된 등화기 계수값과 가지 메트릭의 기준값을 갱신한다. 이러한 방법은 지속적으로 계수값을 계산하여 갱신시켜줘야 하는 기존의 적응등화 방법에 비해 간단하게 각각의 계수값을 갱신시킬 수 있다. Hynix $0.35{\mu}m$ STD cell library로 회로를 합성한 결과 35K 정도의 게이트를 필요로 하고 최대동작속도 140MHz의 성능을 보였다.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.1997-2003
• /
• 2003

Recently, there have been many researches and developments in optical disc drive by high density of track and high access speed. Therefore, the optical pick-up should guarantee highly accurate dynamic characteristics for the wide bandwidth in order to cope with this trend. These demands for optical pick-up actuator can be solved by improvements of lens-holder through the following methods. The first way is the analysis of the sensitivity matrix of design variables for vibration modes after appropriate design parameters are selected like shapes and local dimensions of a lens-holder. The second way is the optimization of design variables by calculating sequential linear programming after the problem of extending bandwidth are converted to problem of minimizing adequate objective function. In the result, modified FE model is obtained through several iterations by finite difference scheme(FDS). While results of the first way show better convergence of the target frequency, the second result shows better reduction of mass increase.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.558-563
• /
• 1995

Dynamic characteristics of TbFeCo magneto-optical recording media at 680nm wavelength region were studied by means of computer simulation of disc structure and optimization of process variables during sputter deposition. With the slightly reduced Kerr rotation angle due to the reduced wavelength of optical laser source, the improved recording density in TbFeCo magneto optical media showing the CNR greater than 50dB could be achieved by only adjusting the thickness of dielectric and the recording layers when the wavelength of light source is changed from 780nm to 680nm. In addition, the recording power margin of 5mW and the 2mW minimum recording power was realized, It was shown from the present study that the increase in laser power density demonstrated feasibility of low cost and low power laser diode with the reduced optimum recording power.

• 한국광학회지
• /
• 제14권3호
• /
• pp.260-265
• /
• 2003

미세하게 진동하는 물체의 변위를 비접촉식으로 측정할 수 있는 광학계를 설계하고 제작하였다. 도플러효과에 의한 방법과는 달리, 하나의 볼록렌즈를 이용하여 물체 표면에 비스듬하게 입사하여 물체 표면에서 반사되는 광점의 위치 변화를 PSD(position-sensitive detector)로 검출하였다. 이러한 방법으로 전체적인 장비의 크기를 작게 하였고 빠른 응답 속도를 구현하였다. 본 장비는 $\pm$1.0 $\mu\textrm{m}$의 분해능을 나타내었으며, 스피커의 진동 실험 및 CD-ROM안에서 회전하는 C교의 진동을 측정하였다.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.148-154
• /
• 2005

SRM은 회전자의 위치에 따라 상권선의 여자시점이 결정되므로 회전자의 정확한 위치정보가 요구된다. 회전자 위치검출을 위해 절대형 엔코더 및 레졸버를 사용할 경우 초기 회전자 위치 검출이 가능하여 초기기동이 가능하지만 경제성을 고려할 때 적절하지 않다. 증분형 엔코더의 경우 초기 회전자 위치 검출이 용이하지 않아 초기기동의 문제가 있고, 홀센서를 이용할 경우 별도의 링마그넷을 부착하여야 하는 단점이 있다. 초기기동과 경제성을 고려할 때 슬롯디스크 및 옵토 인터럽터를 이용한 광센서 기법이 적합하지만, 이 방식은 6/4 pole SRM의 경우 3개의 옵토 인터럽터와 슬롯디스크가 필요하다. 반면에 본 논문에서는 단지 2개의 광센서만을 이용하여 3상 6/4 pole SRM을 구동하였으며 초기기동 및 정·역 운전을 가능하게 하였다. 광센서의 개수를 1개 줄이고 슬롯디스크를 제거함으로써 제작의 편리성과 경제성이 개선되었으며 슬롯디스크 취부면적이 제거되어 모터의 부피도 줄일 수 있었다.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.23-28
• /
• 2008

In this paper we suggested the moving magnet type actuator for optical disc drive which has high frequency of flexible mode. Generally, moving magnet type actuator has the advantage for increase the frequency of flexible mode. But it has low driving sensitivity due to the weight of its moving part. To overcome this shortcoming, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, we improved the driving sensitivity and frequency of flexible mode by using of DOE (design of experiment) procedure for EM circuit. Consequently, it is verified that final designed model satisfied with the desired specifications.

• 수산해양기술연구
• /
• 제14권1호
• /
• pp.37-41
• /
• 1978

Optical properties were studied in the costal waters of the southern part of Korea based on twenty oceanographic stations from 1 st to 9 th February, 1977. Submarine daylight intensity was measured by using an underwater luxmeter (Toshiba No.9). Daylight intensity in the upper 30m depth layer was measured at 1 m depth interval. The absorption coefficient of the sea water in the area ranged from 0.101 to 2.539 (mean 0.578). The Secchi-disc depth in the area ranged from 0.8 to 13 meters (mean 5.33 meters). The relationship between absorption coefficient (K) and transparency (D) was k= 1. 704/ D. The mean water color in the area was 5. 75 (3-9) in Forel scales. The rates of light penetration for daylight at 1m layer in the area ranged from 13.18 to 82. 05% and the mean was 59.56%, while the rate at 5m layer ranged from 0.007 to 46.1% and the mean was 18.47%.