• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.357-360
• /
• 2004

Al doped ZnO thin films have been were properties of excellent optical transmittance, low resistivity and wide bandgap where be widely used transparent electrode on solar cell. In this paper, ZnO:Al thin films on PC substrate were prepared by RF magnetron sputtering method using ceramic taget with diffrent deposition conditions. In addition, the electrical, structural, optical properties were investigated. we investigated sample properties of Sputter powers and pressures change in $25{\sim}125W,\;2{\times}10^{-2}{\sim}2{\times}10^{-3}Torr$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.582-587
• /
• 2023

The effects of the annealing temperature on the structural, morphological, and luminescent properties of SrWO₄:Sm³⁺ thin films grown on quartz substrates by radio-frequency magnetron sputtering were investigated. The thin films were annealed at various annealing temperatures for 20 min in a rapid thermal annealer after growing the thin films. The experimental results showed that the annealing temperature has a significant effect on the properties of the SrWO₄:Sm³⁺ thin films. The crystal structure of the as-grown SrWO₄:Sm³⁺ thin films was transformed from amorphous to crystalline after annealing at 800℃. The preferred orientation along (112) plane and a significant increase in average grain size by 820 nm were observed with increasing the annealing temperature. The average optical transmittance in the wavelength range of 500~1,100 nm was decreased from 72.0% at 800℃ to 44.2% at an annealing temperature of 1,000℃, where the highest value in the photoluminescence intensity was obtained. In addition to the red-shift of absorption edge, a higher annealing temperature caused the optical band gap energy of the SrWO₄:Sm³⁺ thin films to fall rapidly. These results suggest that the structural, morphological, and luminescent properties of SrWO₄:Sm³⁺ thin films can be controlled by varying annealing temperature.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.271-275
• /
• 2006

Al oped zinc oxide (AZO) films were prepared by Facing Targets Sputtering (FTS) system for TCO applications. The electrical, optical and structural properties of AZO thin films have been investigated with input current, oxygen gas flow ratio and substrate temperature. Deposition was carried out at room temperature and $200^{\circ}C$. Working gas pressures were fixed at 1mTorr. As a result, AZO thin film deposited with an optical transmittance over 80 % and a resistivity about $10^{-4}{Omega}{\cdot}cm$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.641-645
• /
• 2013

Chalcogenide glass has superior property of optical transmittance in the infrared region. Glass made using Ge-Se how many important optical applications. We have determined the composite formular of $Ge_{0.25}Se_{0.75}$ to be the GeSe chalcogenide glass composition appropriate for IR lenses. Also, the optical, thermal and physical characteristics of chalcogenide glass depended on the composition ratio. GeSe bulk sample is produced using the traditional melt-quenching method. The optical, structural, thermal and physical properties of the compound were measured by using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Differential scanning calorimeter (DSC), and Scanning electron microscope (SEM) respectively.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.225-227
• /
• 1994

The second-order nonlinear optical effect, especially the second harmonic generation, in Langmuir-Blodgett(LB) films have get much attention over the past few years. For second harmonic generation(SHG) of the ultrathin organic films, the multilayer structure of the film should have the noncentrosymmetric arrangements of molecules. The Langmuir-Blodgett technique can result in the production of thin films of precisely controlled dimensions and structure. In this paper, n-octadecyl 4-(4'-nitrophenylazo)-1-naphthyl ether, ONNE(azohenzene derivative), was synthesized and the optical properties of ONNE was studied. Nonccntrosymmctric Z-type LB films of ONNE were prepared and SHG intensity of the film were measured. The structural characteristics of floating monolayer(L film) and LB film of ONNE were discussed with $\pi$-A isotherm. UV-visible absorption spectroscopy and spectroscopic ellipsometry. The polarized UV-visible absorption spectroscopy and SHO intensity suggest the molecular orientation in LB film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1072-1076
• /
• 2007

We prepared the Al doped ZnO (AZO) thin film on polyethersulfon (PES) without any substrate heating by Facing Targets Sputtering (FTS) system. FTS system has two different facing targets. One is ZnO doped the content of Al 2 wt% and the other is Zn in order to decrease resistivity. The electrical, structural and optical properties of AZO thin films were investigated. To evaluate the as-deposited thin film properties, we employed four-point probe (CMT-R100nw, Changmin), Surface profiler (Alpha-step, Tencor), UV/VIS spectrometer (HP), X-ray diffractometer (XRD, Rigaku) and Field Emission Scanning Electron Microscopy (FESEM, Hitachi S-4700). As a result, We obtained that AZO thin film deposited on PES substrate at a DC Power of 150 W, working pressure of 1 mTorr and $O_2$ gas flow ratio of 0.2 exhibited the resistivity of $4.2{\times}10^{-4}\;[{\Omega}cm]$ and the optical transmittance of about 85 % in the visible range.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.734-736
• /
• 2012

Cadmium telluride (CdTe) films have been prepared on Corning 7059 glass, molybdenum (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on fferent substrates was performed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.125-126
• /
• 2006

ZnO Films have been prepared on polycarbonate (PC), polyethylene terephthalate (PET), and Coming 7059 substrates by r.f. magnetron sputtering technique. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the effect of the sputter power on the structural and optical properties of these films was evaluated.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.2
• /
• pp.63-67
• /
• 2015

$TiO_2/Ag/TiO_2$ trilayer films were deposited with radio frequency (RF) and direct current (DC) magnetron sputtering onto the glass substrate to consider the influence of Ag interlayer on the optical properties of the films. The thickness of $TiO_2$ films was kept at 24 nm, while the thickness of Ag interlayer was varied as 5, 10, 15, and 20 nm. As-deposited $TiO_2$ single layer films show the optical transmittance of 66.7% in the visible wave-length region and the optical reflectance of 16.5%, while the $TiO_2$ films with a 15 nm thick Ag interlayer show the enhanced optical transmittance of 80.2% and optical reflectance of 77.8%. The carrier concentration was also influenced by Ag interlayer. The highest carrier concentration of $1.01{\times}10^{23}cm^{-3}$ was observed for a 15 nm thick Ag interlayer in $TiO_2/Ag/TiO_2$ films. The observed result means that an optimized Ag interlayer in $TiO_2/Ag/TiO_2$ films enhanced the structural and optical properties of the films.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.169-171
• /
• 2009

We have fabricated CIGS thin film absorber layers by the evaporation of CIGS powders which were synthesized by solutions with different atomic ratio compositions. We found that the polycrystalline structural properties and optical properties of the deposited CIGS thin films were strongly dependent on the CIGS powder synthesis solution compositions. For three different solution compositions, Cu:In:Ga:Se= 4:3:1:8, 8:3:1:8, 12:3:1,8, the deposited thin film crystalline structures were varied form InSe crystalline structure to CIGS chalcopyrite structures. Our results showed that CIGS powder evaporation is potential for the one step fabrication process for CIGS thin film absorber layer deposition.