• ETRI Journal
• /
• 제27권3호
• /
• pp.334-336
• /
• 2005

We improved the performance of the spectrum-sliced light source for wavelength-division-multiplexed passive optical networks by employing a Fabry-Perot laser diode(FP-LD). We found that the FP-LDs can suppress the intensity noise as significantly as using a gain-saturated semiconductor optical amplifier. The transmission characteristics were measured and analyzed in both conditions with and without employing an FP-LD.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.68-71
• /
• 2000

In this paper, we have measured the oxygen contents by FTIR in silicon wafer various process technology(slicing, lapping, polishing). The measured data are also compared with the data of etching process(KOH, Bright etching). Also we have measured the surface morpology in backside silicon wafer after etching treatment and etch pit density due to OISF after 4 step high temperature annealing process with optical microscope.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.91-96
• /
• 2013

We report a method for optical monitoring of tumors in an animal model using optical coherence tomography (OCT). In a spectral domain OCT system, a superluminescent diode light source with a full width of 66 nm at half maximum and peak wavelength of 950 nm was used to take images having an axial resolution of 6.8 ${\mu}m$. Cancer cells of PC-3 were cultured and inoculated into the hypodermis of auricle tissues in BALB/c nude mice. We observed tumor formation and growth at the injection region of cancer cells in vivo and obtained the images of tumor mass center and sparse circumferences. On the $5^{th}$ day from an inoculation of cancer cells, histological images of the tumor region using cross-sectional slicing and dye staining of specimens were taken in order to confirm the correlation with the high resolution OCT images. The OCT image of tumor mass compared with normal tissues was analyzed using its A-scan data so as to obtain a tissue attenuation rate which increases according to tumor growth.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.170-182
• /
• 2024

The dimensional accuracy and consistency of a dual oil circuit centrifugal fuel nozzle are important for fuel distribution and combustion efficiency in an engine combustion chamber. A point cloud measurement method was proposed to solve the geometric accuracy detection problem for the fuel nozzle. An improved variance focus measure operator was used to extract the depth point cloud. Compared with other traditional sharpness evaluation functions, the improved operator can generate the best evaluation curve, and has the least noise and the shortest calculation time. The experimental results of point cloud slicing measurement show that the best window size is 24 × 24 pixels. In the height measurement experiment of the standard sample block, the relative error is 2.32%, and in the fuel nozzle cone angle measurement experiment, the relative error is 2.46%, which can meet the high precision requirements of a dual oil circuit centrifugal fuel nozzle.

• 한국광학회지
• /
• 제14권6호
• /
• pp.623-629
• /
• 2003

본 논문에서는 XOR 연산을 위상 변조하여 만든 위상 변조 XOR(phase-encoded exclusive-OR) 연산이라는 개념을 기본으로 그레이 영상을 암호화 한 새로운 광 암호화 방법을 제안하였다 그레이 원 영상을 이진 영상들의 합으로 분리한 후 각각의 이진 영상들을 이진 무작위 영상들과 위상변조 XOR 연산 방법을 이용해 암호화하고, 이를 위상 변조하여 암호화된 데이터를 만들었다. 그리고 복호화에 필요한 키 데이터는 암호화 시 사용한 무작위 이진 영상들로 만든 무작위 그레이 영상을 위상 변조하여 구하였다 암호화된 데이터는 위상 변조로 인한 비선형성과 비가시적 특성을 가지므로 기본적으로 높은 정보보호의 특성이 있으나, 여기에 위상정보 자체를 암호화함으로써 보다 높은 수준의 정보 보호를 가능하게 하였다. 또한, 복호화 과정은 암호화 데이터와 키 데이터의 단순 곱과 기준파와 간섭을 이용하므로, 원 영상 복원 시 간단한 위상 시각화 시스템(phase-visualization system)으로 구현할 수 있다. 컴퓨터 시뮬레이션을 통해 제안한 방법의 구현 가능성과 타당성을 확인하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.96-101
• /
• 2006

3-D visualization using confocal laser scanning microscopy (CLSM) in a chaotic micromixer was performed as a reproduction experiment and the feasibility of 3-0 imaging technique in the microscale was confirmed. For diagonal micromixer (DM) and two types of staggered herringbone micromixers (SHM) designed by Whitesides et al., to verify the evolution of mixing, cross sectional images are reconstructed at the end of every cycle. In a DM, clockwise rotational flow motion generated by diagonal ridges placed on the floor of micromixer is observed and this motion makes the fluid commingle. On the contrary, there are two rotational flow structures in the SHM and the centers of rotation exchange their position each other every half cycle because of the V shape of ridges varying their orientation every half cycle. Local rotational flow and local extensional flow generated by the complicate ridge pattern make the flow be chaotic and accelerate the mixing of fluid. The dominant parameter that influences on the mixing characteristic of SHM is not the length of micromixer but the number of ridges under the same flow configurations.