• Journal of Astronomy and Space Sciences
• /
• v.33 no.2
• /
• pp.137-146
• /
• 2016

The correlation between meteorological data collected at the optical wide-field patrol network (OWL-Net) Station No. 1 and the seeing of satellite optical observation data was analyzed. Meteorological data and satellite optical observation data from June 2014 to November 2015 were analyzed. The analyzed meteorological data were the outdoor air temperature, relative humidity, wind speed, and cloud index data, and the analyzed satellite optical observation data were the seeing full-width at half-maximum (FWHM) data. The annual meteorological pattern for Mongolia was analyzed by collecting meteorological data over four seasons, with data collection beginning after the installation and initial set-up of the OWL-Net Station No. 1 in Mongolia. A comparison of the meteorological data and the seeing of the satellite optical observation data showed that the seeing degrades as the wind strength increases and as the cloud cover decreases. This finding is explained by the bias effect, which is caused by the fact that the number of images taken on the less cloudy days was relatively small. The seeing FWHM showed no clear correlation with either temperature or relative humidity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.793-799
• /
• 2014

EO GRD(Ground Resolved Distance) resolution of airborne EO/IR(Electro-Optical/Infrared) sensor is a critical factor in test and evaluation for EO sensor performance. We propose the laboratory measurement set-up for EO GRD by constructing optical collimator which includes integrated sphere, blackbody, equivalent 3-bar target and 6 DOF motion simulator. GRD is measured in the photographic imagery of bar targets by 3 different distances for 3 EO/IR sensors and the measured results were analyzed statistically. We found that at least 7 sheets of imagery are needed in order to obtain meaningful EO GRD. The result of statistical analysis shows that the distribution of the measured GRD is nearly symmetric about the average GRD, and the better imagery ratio above the average GRD is about 40~70%. Also from the best GRD analysis, it is estimated that the design goal for EO GRD should be 30% superior to the required GRD.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.104-109
• /
• 2009

In order to apply FBG(Fiber Bragg Grating) sensor as one of reliable sensors in the commercial railway structure, the reliability of FBG sensor in the mechanical strength viewpoint have to be confirmed and the maximum strain should surpass the fracture strain of the host structure to measure the measurands until the host structures fail. In this paper, several factors that influence the mechanical failure strength of fiber Bragg grating sensors were analyzed. A set-up for dynamic tensile testing of optical glass fibers with fiber Bragg gratings was made. To increase the FBG failure strength, techniques relying on the H2 loading treatment and stripping methods were established and testified as a result of the tensile strength test of optical fibers.

• Korean Journal of Crystallography
• /
• v.2 no.2
• /
• pp.32-40
• /
• 1991

The effects of compositional variation, rotation speel and pulling rate on the growth of optical quality Bi120e02(1 crystals were examined. It was found to flatten the shape of crystal-melt interface for yowing a single crystals less than about 30mm in diameter at the rotation speed of 50rpm. Diameter of crystals with flat interface was increased as the pulling rate. The precipitation of Bi40e3012 phase set limits to pulling rate of BGO crystals. Precipitate-free BGO crystals were grown under pulling rate of 2mm l hr which released the stress resulted from too hi어 Pulling rate, and from 6. IBi203·GeO2 batch composition obtained by addition of 0.1 mole Bi203 into Bi-deficient melts to fill up the deficiency resulted from gradual volatilization of Bi2O). The pale-yellow colored crystals had good quality in that dislocation density was less than 103pits/cm, and it also exhibited transmittance of 70% and optical activity of 23°/mm. and SAW velosity was measured 1700m/sec on 111 cut 110 propagating BGO crystals. The SAW filter with electrode thickness of 9.8um was fabricated by using the electron beam and dry etching technique, it makes Bi12GeO20 devices intersting for color TV IF with half device size.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.333-344
• /
• 1994

In this study an experiment was made using the function of computer simulation os to whether the phenomenon of optical illusion takes place also in clothing on the human body three-dimensional space through the case study of the Gestalt illusion of planar con-traction and expension by amodal completion in perceptual organization. One woman of latter 30s was selected as the experimental subject. She was made to wear the experimental clothing and then the frontal picture was projected of in the experimental clothing which was scanned into the com-puter. For the sake of the contractive experiment 5 stages were divided by 5-15cm the thick-nes of the black vertical line in the center of the upper garmet as the variable and for the sake of the expansive experiment the skirt length was set as the variable. It length measured 50-90cm which was divided by 10cm into 5 stages and simulated using the CAD. The basic design and the experimental de-sign were made one pair and the pictures totalled 20 pictures such as ten pictures save the human body for the estimation of the up-per garmet alone and ten pictures for the ob-servation of the effect on the human body. The extimating panel consisting of 20 panellers estimated contraction/expansion in the estimation of the upper garmet and the tall effect/the slim effect in the estimation of optical illusion as the estimating factors on the 9-point scale. All the date from experiment were analyzed by ANOVA(analysis of variance) and DUNCAN'S multiple range. As a result the experimental designs all showed a significant optical illusion in comparision with the basic design.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.101-113
• /
• 2021

Adaptive optics (AO) systems are becoming more complex to improve their optical performance and enlarge their field of view, so it is a hard and time consuming process to set up and optimize the components of AO systems with actual implementation. However, simulations allow AO scientists and engineers to experiment with different optical layouts and components without needing to obtain and prepare them physically. In this paper, we introduce a new AO simulation named the Korea Adaptive Optics Simulation (KAOS), independently developed by LIG Nex1. We verified the performance of KAOS by comparing with other AO simulation tools. In the comparison simulation, we confirmed the results from KAOS and other AO simulation tools were very similar. Also, we proposed a laser tomography AO system with five Rayleigh laser guide stars (LGSs) optimized by using KAOS to overcome the disadvantages of the AO system with a single sodium LGS for the satellite imaging system. We verified the performance of the proposed AO system using KAOS, and the simulation result showed averaged Strehl ratio of 0.37.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.3
• /
• pp.115-119
• /
• 2019

This paper is a part of the series on positron annihilation spectroscopy of two-phase diffuse gas-and-dust aggregates, such as interstellar medium and the young remnants of type II supernovae. The results obtained from prior studies were applied here to detect the relationship between the processes of the annihilation of the K-shell electrons and incident positrons, and the effects of these processes on the optical spectra of their respective atoms. Particular attention was paid to the Doppler broadening of their optical lines. The relationship between the atomic mass of the elements and the Doppler broadening, ${\Delta}{\lambda}_D$ (${\AA}$), of their emission lines as produced in these processes was established. This relationship is also illustrated for isotope sets of light elements, namely $^3_2He$, $^6_3Li$, $^7_3Be$, $^{10}_5B$ and $^{11}_5B$. A direct correlation between the ${\gamma}-line$ luminosity ( $E_{\gamma}=1.022MeV$) and ${\Delta}{\lambda}_D$ (${\AA}$) was proved virtually. Qualitative estimates of the structure of such lines depending on the positron velocity distribution function, f(E), were made. The results are presented in tabular form and can be used to set up the objectives of further studies on active galactic nuclei and young remnants of type II supernovae.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1289-1293
• /
• 2010

A slipring or FORJ are usually adopted in order for power supply of Geo-centrifuge and input/output data acquisition. Since using slipring causes quite a lot electrical noise, an optical communication using FORJ becomes more general for data acquisition. Such data acquisition devices, however, require frequent maintenance and replacement due to deterioration by long term usage. DICT has set up a real-time wireless date acquisition system using wireless communication technology instead of FORJ. The system enables a remote measurement at any inertial acceleration field up to 100g level and provides as same performance as FORJ. The priority of this system is to use a normal modem substituting a special FORJ.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.499-507
• /
• 2004

We have studied tile detection techniques, which can determine the location and the weight of an intruder into infrastructure, by using fiber-optic ROTDR (Rayleigh optical time domain reflectometry) sensor and fiber-optic BOTDA (Brillouin Optical time domain analysis) sensor, which can use an optical fiber longer than that of ROTDR sensor Fiber-optic sensing plates of ROTDR sensor, which arc buried in sand, were prepared to respond the intruder effects. The signal of ROTDR was analyzed to confirm the detection performance. The constructed ROTDR could be used up to 10km at the pulse width of 30ns. The location error was less than 2 m and the weight could be detected as 4 grades, such as 20kgf, 40kgf, 60kgf and 80kgf. Also, fiber optic BOTDA sensor was developed to be able to detect intrusion effect through an optical fiber of tells of kilometers longer than ROTDR sensor. fiber-optic BOTDA sensor was constructed with 1 laser diode and 2 electro-optic modulators. The intrusion detection experiment was peformed by the strain inducing set-up installed on an optical table to simulate all intrusion effect. In the result of this experiment, the intrusion effort was well detected as the distance resolution of 3m through the fiber length of about 4.81km during 1.5 seconds.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.613-616
• /
• 2005

In this word as the first step to develop optical biosensors for a single cell level analysis, the preparation method of nano-scale polymer hydrogel spheres containing an enzyme was set up and the feasibility of the spheres as optical biosensors was investigated. The horseradish peroxidase (HRP) was encapsulated in the PEG hydrogel spheres by suspension photopolymerization, yielding spheres of the average size of 305 nm. After the polymerization, the incorporation and activity of HRP within the spheres were determined by the production of fluorescence resulted from the enzymatic reaction between HRP and $\H_{2}O_{2}$. The fluorescence emission response of the HRP-loaded PEG hydrogel spheres increased by nearly 300$\%$ as hydrogen peroxide concentration was changed from 0 to 11 nM in the presence of Amplex Red. The results suggest that the method to prepare the PEG hydrogel nanospheres containing an enzyme could be used for developing optical biosensors to measure various analytes in the very small samples like a single cell.