• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.86-87
• /
• 2002

• Current Optics and Photonics
• /
• 제3권2호
• /
• pp.164-171
• /
• 2019

Photoluminescence (PL) properties of GaN-based light-emitting diodes (LEDs) were analyzed to study the effects of carrier leakage on the luminescence properties at room temperature. The electrical leakage and PL properties were compared for LEDs showing leakages at forward bias and an LED with an intentional leakage path formed by connecting a parallel resistance of various values. The leakages at the forward bias, which could be observed from the current-voltage characteristics, resulted in an increase in the excitation laser power density for the maximum PL efficiency (ratio of PL intensity to excitation power) as well as a reduction in the PL intensity. The effect of carrier leakages on PL properties was similar to the change in PL properties owing to a reduction of the photovoltage by a reverse current since the direction of the carrier movement under photoexcitation is identical to that of the reverse current. Valid relations between PL properties and electrical properties were observed as the PL properties deteriorated with an increase in the carrier leakage. The results imply that the PL properties of LED chips can be an indicator of the electrical properties of LEDs.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.742-748
• /
• 2004

비등점이 낮은 용매인 isopropanol에 용질농도 0.7mol/$\iota$ Zn acetate를 용해시키고 dopant로 Al chloride를 첨가하여 균일하고 안정한 sol을 합성하였다. 졸-겔법에 의한 Al-doped ZnO(AZO) 박막의 제조시 $500\~700^{\circ}C$의 범위에서 후열처리 온도를 제어하여 박막의 전기 및 광학적 특성을 조사하였다. 후열처리 온도가 증가할수록 (002) 면으로의 c-축 결정배향성은 증가하였고, 박막 표면은 균일한 나노입자의 미세구조를 형성하였다. 광 투과도는 $650^{\circ}C$ 이하의 후열처리 온도에서 $86\%$이상이었으나, $700^{\circ}C$에서는 감소하였다. 박막의 전기 비저항 값은 $650^{\circ}C$ 이하에서 열처리 온도가 증가함에 따라 73에서 22$\Omega$-cm로 감소하였으나 $700^{\circ}C$에서 580$\Omega$-cm로 급격히 증가하였다. 후열처리 온도 $700^{\circ}C$에서 AZO 박막의 전기 및 광학적 특성의 열화는 XPS 분석결과, 박막 표면에 석출된 $Al_2O_3$ 상에 기인하였다. AZO 박막의 전기 및 광학적 특성 향상을 위한 최적의 후열처리 온도는 $600^{\circ}C$였다.

• 공업화학
• /
• 제30권2호
• /
• pp.205-211
• /
• 2019

지난 수십 년 동안 고분자 분산형 액정(polymer dispersed liquid crystal, PDLC)은 전기광학적으로 전환이 가능한 특성으로 인해 빛의 투과도를 자유롭게 조절할 수 있는 smart window를 개발하는 물질로서 주목을 받아왔다. 본 연구에서는 높은 구동전압과 낮은 명암비 등의 PDLC 문제점을 해결하기 위해 아크릴계 단량체 2-hydroxyethyl acrylate (2-HEA)와 ethylene glycol phenyl ether acrylate (EGPA)의 조성이 PDLC의 전기광학 특성에 미치는 영향을 평가하였다. 상온에서 10 cps 이하의 낮은 점도를 나타내는 2-HEA와 EGPA 단량체를 사용하여 제조하는 경우 보다 쉽게 capillary action에 의해서 indium tin oxide (ITO) glass 사이에 주입하는 공정이 가능하였다. Phenyl group를 포함한 EGPA 단량체가 대부분으로 이루어진 1 : 9인 단량체 혼합물로 만들어진 PDLC cell의 경우 전기장을 인가하지 않은 경우에도 불투명한 상태가 관측되지 않았고 인가 전압에 따라 매우 불안정한 투과율을 나타내었다. Cell gap thickness가 증가함에 따라 문턱전압(threshold voltage, $V_{th}$)과 포화전압(saturation voltage, $V_{sat}$)도 증가하는 경향을 나타내었으며, $20{\mu}m$의 cell gap thickness를 갖는 PDLC cell이 10과 $40{\mu}m$의 경우 보다 상대적으로 높은 명암비를 나타내었다. 특히, 7 : 3 비율의 2-HEA : EGPA 단량체 혼합물을 사용하여 제조된 PDLC cell의 경우가 낮은 구동전압과 높은 명암비의 가장 우수한 전기광학적 특성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.119-121
• /
• 2005

The problem of lamp life have being solved before electrode-less lamps were developed. But, mercury is using till now. So people are concerned about friendly-environmental lamp, and many researcher hardly study it. In this paper, an ICP lamp which is using Xe gas and Ne gas was designed after optical properties were measured and analyzed. As a result, H-mode properties and penning effect properties were known. Also xenon and neon of properties analyze by spectrum.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.145-146
• /
• 2005

Cadmium sulphide (CdS) films have been prepared on polycarbonate (PC), polyethylene terephthalate (PET), and Coming 7059 substrates by r.f. magnetron sputtering technique at room temperature. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the effect of the sputter pressure on the structural and optical properties of these films was evaluated.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.24-29
• /
• 1995

The magnetic amd magneto-optical(MO)properties of Co-based multilayered(ML)films are known to vary sensitively according to the manufacturing methods and the film microstructures. Co/Pd and Co/Pt ML films with ultrathin layers of Co were prepared by alternating deposition in an ultrahigh-vacuum physical-vapor-deposition system. The individual layer thicknesses of the samples were estimated making use of the angular positions of x-ray diffraction peaks. The magnetic and MO properties were investigated, and correlated systematically to the structural parameters of the films. A Kerr spectrometer was self-manufactured to measure the MO properties such as Kerr rotation angle, ellipticity and reflectivity. The rms surface roughness was also measured using atomic force microscopy. Some of the samples showed good properties for MO medium, such as large perpendicular magnetic anisotropy and Kerr rotation, and perfect squareness of the magnetic hysteresis loop.

• 대한원격탐사학회지
• /
• 제33권4호
• /
• pp.359-375
• /
• 2017

We developed fog detection algorithm (KNU_FDA) based on the optical and textural properties of fog using satellite (COMS) and ground observation data. The optical properties are dual channel difference (DCD: BT3.7 - BT11) and albedo, and the textural properties are normalized local standard deviation of IR1 and visible channels. Temperature difference between air temperature and BT11 is applied to discriminate the fog from other clouds. Fog detection is performed according to the solar zenith angle of pixel because of the different availability of satellite data: day, night and dawn/dusk. Post-processing is also performed to increase the probability of detection (POD), in particular, at the edge of main fog area. The fog probability is calculated by the weighted sum of threshold tests. The initial threshold and weighting values are optimized using sensitivity tests for the varying threshold values using receiver operating characteristic analysis. The validation results with ground visibility data for the validation cases showed that the performance of KNU_FDA show relatively consistent detection skills but it clearly depends on the fog types and time of day. The average POD and FAR (False Alarm Ratio) for the training and validation cases are ranged from 0.76 to 0.90 and from 0.41 to 0.63, respectively. In general, the performance is relatively good for the fog without high cloud and strong fog but that is significantly decreased for the weak fog. In order to improve the detection skills and stability, optimization of threshold and weighting values are needed through the various training cases.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.309-314
• /
• 1999

With a view to seek the influence of hollow sphere pigments of latex upon the printed color on coated paper surface, the hollow sphere pigments were compared with filled ones in a variety of experimental approaches. Colloidal properties of latices were determined by measuring zeta potential and particle size distribution. For the amphoteric filled sphere pigment of latex, the polarity was reversed from the negative side to the positive side with decreasing pH. An extraordinarily high peak in the particle size distribution of the amphoteric filled evidenced aggregation between latex particles near the isoelectric point, depending on the electrolyte concentration and pH of the suspending medium. Coated papers containing the hollow sphere pigment in their coating improved optical properties like gloss and brightness. Optical parameters solely of the coating could account for this finding. An equation derived from the Kubelka-Munk equation calculated them fro twice measurements of reflectance of a coated paper over two substrates of different reflectances. This method permitted to predict brightness of coated paper of which coat weight would be different fro the actual one. The colorimetric parameters of solid-printed surfaces of the coated papers closely related to optical and structural properties of the coated papers. The color of the printed surfaces was dominated by the brightness and the smoothness of the coated papers. The hollow sphere pigments were proved to improve optical properties of coated paper and to control minutely colorimetric parameters of printed surfaces.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.422-426
• /
• 2008

The effects of an addition of $ZrO_2$ on the microstructure and electrical properties of MgO films as a protective layer for AC plasma display panels were investigated. MgO + a 200 ppm $ZrO_2$ protective layer prepared by e-beam evaporation exhibited a secondary electron emission coefficient ($\gamma$) that was improved by 21% compared to that of a pure MgO protective layer. The relative density and Vickers hardness increased with a further addition of $ZrO_2$. These results suggest that the discharge properties and optical properties of MgO protective layers are closely related to the relative density and Vickers hardness. The good optical and electrical properties of $\gamma$, at 0.080, a grain size of $19\;{\mu}m$ and an optical transmittance of 91.93 % were obtained for the MgO + 200 ppm $ZrO_2$ protective layer sintered at $1700^{\circ}C$ for 5 hrs.