• 한국광학회지
• /
• 제32권6호
• /
• pp.306-313
• /
• 2021

버퍼가스와 세슘 증기가 혼합된 광 증폭 시스템을 구성하고 세슘 용기의 온도 및 빔 직경의 변화에 따른 광 증폭 특성을 조사하였다. 광 증폭인자 및 추출 효율 등 광 증폭기 특성이 세슘 용기의 온도 및 빔 직경에 따라 크게 변하는 것을 확인하였는데, 90 ℃의 세슘 용기온도에서 200 ㎛ 직경을 가진 펌프(500 mW) 및 씨앗 광(10 mW)이 입사하였을 때 최대 56%의 광 추출효율을 얻을 수 있었다. 또한, 전산 모사를 통하여 계산한 광 증폭 특성이 실험으로부터 얻은 결과와 합리적으로 일치하는 것을 확인하였다.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.1-10
• /
• 2014

In papermaking industry, inorganic fillers are widely used for the purpose of improving opacity, brightness, printability, uniformity and dimensional stability. They are also useful for production costs and energy savings. In the past, inorganic fillers in papermaking industry only focused on micro-scale but recently, new trials on nano-powdered technology are applying. Even nano-powdered fillers are rapidly utilized for improving the optical and surface properties in coating and surface sizing, there still have some problems in wet-end process due to poor dispersibility and retention. In this study, nano-particled calcium carbonate was produced by milling the PCC and its applicability between micro sized and nano sized calcium carbonated was compared in wet-end process, and finally the sheet properties were evaluated. Nano-PCC was not retained in sheet structure without applying retention system, but with retention system nano-powdered PCC was absorbed on fiber surface with expanding the fiber networks. The application of PAM-bentonite system has resulted in high ash retention and bulky structure for copier paper, and good optical properties in brightness and opacity. However, it required to solve the weakness of low tensile property due to interruption of hydrogen bonding by nano fillers.

• 패션비즈니스
• /
• 제6권5호
• /
• pp.1-11
• /
• 2002

Today, great percentage of apparel fabrics comprise knit products. A few apparel items are almost exclusively made from knit products including sweaters, T-shirts, lingerie, and hosiery. In weft knits, intermeshing yarn traverses the fabric crosswise. The production rate of knitting machines is about four times higher than that of conventional looms iin proportion to the amount of fabric produced per unit time. Knit apparels fabrics are noted for freedom of body movement, easy-care, resilience, soft draping and quality. The appearance of fabrics is of prime importance along with tactile features such as smoothness, crispness, stiffness when we deal with the handling evaluation of the textiles. In practice, the quality and performance of fabrics judged by sighted evaluators, and it is perhaps logical, in attempting to establish an effective fabric objective measurement system. It is worthwhile to make objective measurement that correlate well with subjective evaluations made by sight and touch together. However, it often imposes difficulties to effectively measure and analyze the appearance or optical properties of the textile surface features. In this study, an attempt is made to provide a preliminary approach to the analysis of the gloss property, which is one of the optical properties of fabrics. The specimens range from 70/24 nylon 6 filament yarn knit fabric to 70/68 nylon 6 filament yarn knit fabric, the latter being finer. A few three-dimensional models based on Peirce's model of knit stitch have been proposed and material properties were given to calculate the properties. Goniophotometric measurements of the specimens were also carried out.

• Journal of Information Display
• /
• 제9권1호
• /
• pp.26-32
• /
• 2008

The dependence of optical performances of collimating films such as prism films and pyramid films on the reflecting properties of reflection films were investigated by using a ray tracing technique. The angular distribution of the luminance and the on-axis luminance gain were obtained by using a simple backlight model composed of a reflection film, a virtual flat light source, and a collimating film. Three kinds of reflecting properties were used, which were a perfect Lambertian reflector, a perfect mirror reflector, and a reflector having both diffuse and specular properties. It was found that the on-axis luminance gain was the highest in the simulation where a mirror reflector was used, while the viewing angle was the widest where the Lambertian reflector was used. This result indicates that it is necessary to optimize the simulation condition such as the reflecting properties in order to predict the optical performances of collimating films accurately. Quantitative correlation between the optical characteristics of collimating films and the reflecting properties of reflection films can be used to improve simulation technique for the development and the optimization of collimating films for LCD backlight applications.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1113-1119
• /
• 2003

저온 박막 공정을 위해 비등점이 낮은 용매인 isopropanol을 사용하였고, 용질로 zinc acetate의 몰 농도를 0.3∼1.3 mol/l까지 변화시켜 sol을 합성하였다. Zn 농도 변화에 따른 ZnO 박막의 구조 및 광학, 전기적 특성을 분석하였다. XRD 측정에서 Zn의 농도가 0.7 mol/l 일 때 c-축으로 결정 배향성이 뚜렷하였다. SEM으로 박막의 표면 morphology를 관찰한 결과 0.7 mol/l 에서 균일한 표면층을 갖는 나노구조를 이루고 있었다. UV-vis. 측정을 통한 ZnO 박막의 광투과도는 Zn의 농도가 0.7 mol/l 이하에서 87%였으나, 1.0 mol/l 이상의 농도에서는 급격히 감소하였다. 이때 광 밴드갭 에너지는 3.07∼3.22 eV의 값을 나타내며, 벌크 ZnO의 특성과 유사하였다. 박막의 전기 비저항 값은 150 $\Omega$-cm로 Zn의 농도변화에 따라 큰 변화를 보이지 않았으며, I-V 특성분석에서 전형적인 ohmic contact 특성을 보였다.

• 소성∙가공
• /
• 제18권2호
• /
• pp.128-134
• /
• 2009

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting an injection molding analysis with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a numerical scheme is developed to calculate the distribution of refractive index induced from the injection molding process. This index distribution is then reflected onto CODE $V^{(R)}$ simulation and used to calculate ray paths in inhomogeneous media. The proposed tracing scheme is implemented on the tracing of an aspheric lens for a mobile phone camera module.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.21-25
• /
• 1998

Lead zirconate($PbZrO_3$, PZ) 박막의 광학적 성질을 조사하였다. 광학적 성질을 조사하기 위한 PZ 박막은 sol-gel 법으로 ITO glass 위에 제작되었다. 열처리온도 $T=700^{\circ}C$로 후열처리함에 의해 증착된 시료의 pyrochlore 상은 perovskite 상으로 변환되었다. 박막의 표면은 매우 평탄하였고, 투과율은 480~2000nm의 파장에서 60~80%였으며, 굴절률은 480~1000nm의 파장에 대하여 2.1~1.9 정도였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.147-150
• /
• 1994

To predict light propagation in biological tissues irradiated by laser, the optical properties such as absorption and scattering coefficients are required. There have been various techniques for measuring these coefficients. One method requires tissue samples, often a slab of thin tissue, is invasive. On the other hand, non-invasive method usually measures back-scattered light from a subject with no physical intervent ions. Advantages and disvantages of using different methods are investigated. A careful attention should be made in order to select the best method for a given experimental condition since, even either for invasive or non-invasive method, accuracy is subject to governing models and sample preparations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2001

ZnO thin films on (001) sapphire substrates have been deposited by pulsed laser deposition(PLD) technique at the oxygen pressure of 350 mTorr. In order to investigate the effect of post-annealing treatment with oxygenn pressure of 350 mTorr on the optical property of ZnO thin films, films have been annealed at various substrate temperatures after deposition. After post-annealing treatment in the oxygen ambient, the optical properties of the ZnO thin films were characterized by PL(Photoluminescence) and structural properties of the ZnO were characterized by XRD, and have investigated structural property and optical property for application of light emission device.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.25-26
• /
• 2006

Azobenzene functionalized polymers have been extensively investigated due to the potential applications in the areas of optical switching, optical elements, optical information storage, and nonlinear optics. These applications are mainly achievable due to photoinduced properties of azobenzene groups with photoisomerization and photoinduced anisotropy. We report applications to the optoelectronic devices using inscribed one-(1D) and two-dimensional (2D) SRGs on azo polymer films. The inscribed holographic SRGs patterns were useful to control or enhance optoelectronic properties such as transparent electrode patterning, hybrid solar cell and ultraviolet GaN-based LED.