• 펄프종이기술
• /
• 제46권4호
• /
• pp.69-75
• /
• 2014

Effects of alkali swelling of HwBKP (hardwood bleached kraft pulp) at a low concentration below 2 percent (based on the oven-dried weight of pulp) on handsheet properties were investigated. Swelling treatment of HwBKP was performed at various low NaOH concentrations with/without beating. Then, the changes in handsheet properties were evaluated in terms of bulk, optical and strength properties. It was found that bulk was slightly increased when the alkali concentration was increased. When the pulp was only swollen without beating, paper optical and strength properties was slightly decreased or not changed with alkali concentration. When the pulp was alkali-swollen after beating, paper strength and opacity showed almost no changes while brightness was increased. When the pulp was beaten after NaOH swelling, alkali concentration showed almost no effect on brightness and opacity of paper. Paper strength was slightly decreased with alkali concentration, suggesting that alkali pretreatment before refining could adversely affect refining efficiency.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.174-175
• /
• 2002

One-dimensional semiconductor nanowires and nanorods have attracted increasing interest due to their unique physical properties and diversity for potential electronic and photonic device applications., Unlike the conventional nanowires fabricated by metal catalyst-assisted vapor-liquid-solid (VLS) method, we developed metalorganic vapor-phase epitaxial (MOVPE) growth for which no catalyst is needed. The structural and photoluminecent properties will also be discussed. (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.183-186
• /
• 2002

Polymer composites with carbon nanotubes have recently been investigated for improving certain properties i.e., electrical, optical and mechanical properties[1-3]. Kymakis et. al. have reported the electrical and optical properties of single wall carbon nanotube-poly(3-octylthiophene) composites[4]. Polyurethane dissolved in dimethylformanide (DMF) were electrospun by Demir et. al.[5]. (omitted)

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.63.2-63.2
• /
• 2012

One-dimensional nanowires (NW)/nanorods are under intense investigation in materials science due to their potential applications in many electronic devices. Since the properties required for these applications are greatly influenced by their microscopic structures, it is important to understand the relation between the microstructures with their optical and electric properties. In this study, Ag nanowires were synthesized in various dimensions and coated onto PET films to form transparent electrode. Their optical and electrical properties were studied in terms of their microstructures. Highly transparent (>90%), low haze transparent electrode films were successfully fabricated with surface resistance as low as (~50 ${\Omega}$/>).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.24.1-24.1
• /
• 2009

The zinc oxide (ZnO) material as the II-VI compound semiconductor is useful in various fields of device applications such as light-emitting diodes (LEDs), solar cells and gas sensors due to its wide direct band gap of 3.37eV and high exciton binding energy of 60meV at room temperature. In this study, the ZnO nanorods were deposited onto homogenous buffer layer/Si(100) substrates by a hydrothermal synthesis. The Effects of the buffer layer annealing and post annealing temperature on the structural and optical properties of ZnO nanorods grown by a hydrothermal synthesis were investigated. For the buffer layer annealing case, the annealed buffer layer surface became rougher with increasing of annealing temperature up to $750^{\circ}C$, while it was smoothed with more increasing of annealing temperature due to the evaporation of buffer layer. It was found that the roughest surface of buffer layer improved the structural and optical properties of ZnO nanorods. For the post annealing case, the hydrothermally grown ZnO nanorods were annealed with various temperatures ranging from 450 to $900^{\circ}C$. Similarly in the buffer layer annealing case, the post annealing enhanced the properties of ZnO nanorods with increasing of annealing temperature up to $750^{\circ}C$. However, it was degraded with further increasing of annealing temperature due to the violent movement of atoms and evaporation. Finally, the buffer layer annealing and post annealing treatment could efficiently improve the properties of hydrothermally grown ZnO nanorods. The morphology and structural properties of ZnO nanorods grown by the hydrothermal synthesis were measured by atomic force microscopy (AFM), field emission scanning electron microscopy (SEM), and x-ray diffraction (XRD). The optical properties were also analyzed by photoluminescence (PL) measurement.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1481-1488
• /
• 1995

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of IIR lattice structure, which uses coherent light sources and consists of directional couplers whose coupling coefficients are restricted between 0 and 1. Considering restrictions of directional coupler, the design formulae and condition for realibility of optical fiber filter of IIR lattice structure which makes the optimal use of optical signal energy are derived.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.477-479
• /
• 1997

The preparation of mach-zehnder inteferometric optical modulator and the properties of electrode and modulation bandwidth for high speed optical communications were described. The results of fabricated optical modulator was that optical 3-dB bandwidth 4.7GHz, driving voltage 6V and fiber-waveguide-fiber insertion loss 4.5dB for TM mode respectively.

• 공업화학
• /
• 제24권3호
• /
• pp.320-326
• /
• 2013

본 연구에서는 저온경화 공정으로 합성한 다양한 폴리이미드의 물성 변화를 이해하기 위하여 4,4'-oxydianiline (ODA) 단일 다이아민(diamine)에 여러 가지 주쇄(backbone)를 가지는 산무수물(dianhydride)들을 [4,4'-oxydiphthalicanhydride (ODPA), 4,4-hexafluoroisopropylidenediphthalic dianhydride (6FDA), 3,3', 4,4'-benzophenonetetracarboxylic dianhydride (BTDA)]사용하였다. 폴리아믹산(poly(amic acid); PAA)의 합성 후, 저온경화 촉매인 1,4-diazabicyclo[2.2.2]octane (DABCO)를 여러 wt%로 첨가하여 폴리이미드 박막을 제작하고 촉매를 넣지 않은 박막과 FT-IR, UV-Vis 투과도, DSC/TGA, WAXD 분석을 통해 그 특성 변화를 비교 분석하였다. 촉매를 이용한 폴리이미드의 저온경화 시 산무수물의 종류에 따라 광학특성 및 열특성 변화량의 차이가 나타났고, 이는 촉매에 의한 mean intermolecular distance의 감소량이 산무수물의 주쇄구조에 따라 다르기 때문으로 확인되었다. 1 wt%의 촉매를 사용 시 광학특성 증가는 최대가 되고 열특성 저하는 최소가 됨을 확인하였다. 이러한 실험결과를 통해 촉매를 이용한 저온경화 폴리이미드 박막의 특성변화는 그 화학구조와 밀접한 관련이 있음을 확인할 수 있다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.322-323
• /
• 2008

Multi layered thin films with ZnS/$Na_3AlF_6$/ZnS were deposited on glass substrate by thermal evaporator precess and simulated by using EMP(Essential Macleod Program). EMP is a comprehensive software package to design and analyse the optical characteristics of multi-layered thin film. ZnS and $Na_3AlF_6$ were selected as a high refractive index and low refractive index material respectively. Additionally Cu was chosen as mid reflective material. Optical properties including color effect were systematically studied. in terms of different optical thickness of low refractive index material. The optical thickness of $Na_3AlF_6$ was changed as 0.25, 0.5, 0.75 and $1.0\lambda$. The film with 0.25, 0.5, 0.75 and $1.0\lambda$. of optical thickness showed mixed color range between bluish green and red purple, yellowish green and bluish green, purple and mixed color range of green and purple respectively.