• 전기학회논문지
• /
• 제58권1호
• /
• pp.147-154
• /
• 2009

This paper presents a grating~integrated SPR (Surface Plasmon Resonance) sensor chip for simple and inexpensive biomolecule detection. The grating-integrated SPR sensor chip has two sensing channels having a nano grating for SPR coupling. An external mirror is used for multi channel SPR sensing. The present sensor chip replaces bulky and expensive optical components, such as fiber-optic switches or special shaped prisms, resulting in a simple and inexpensive wavelength modulated multi-channel SPR sensing system. We fabricate a SPR sensor chip integrated with 835 nm-pitch gratings by a micromolding technique to reduce the fabrication cost. In the experimental characterization, the refractive index sensitivity of each sensing channel is measured as $321.8{\pm}8.1nm$/RI and $514.3{\pm}8.lnm$/RI, respectively. 0.5uM of the target biomolecule (streptavidin) was detected by a $1.13{\pm}0.16nm$ shift of the SPR dip in the 10%-biotinylated sample channel, while the SPR dip in the reference channel for environmental perturbation monitoring remained at the same position. From the experimental results, multi-channel biomolecule detection capability of the present grating-integrated SPR sensor chip has been verified. On the basis of the preliminary experiments, we successfully measured the binding reaction rate for the $2\;nM{\sim}200\;nM$ monoclonal-antibiotin, thus verifying biomolecule concentration detectability of the present SPR sensor chip. The binding reaction rates measured from the present SPR sensor chip agredd well with those from a commercialized SPR sensor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.174-174
• /
• 2014

Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.33-38
• /
• 2008

As consumer in optics, electronics, aerospace and electronics industry grow, the demand for ultra precision aspherical surface lens increases higher. Precision turning with single-diamond tools has a long history of development for fabrication of optical quality surfaces since the advent of aerostatic rotary spindles and precise linear motion guide ways. To enhance the precision and productivity of ultra precision aspherical surface micro lens, the following specification of ultra precision grinding system is required: the highest rotational speed of the grinder is 100,000rpm and its turning accuracy is $0.1{\mu}m$, positioning accuracy is $0.1{\mu}m$. The development process of the grinding system for the ultra precision aspherical surface micro lens for optoelectronics industry is introduced. In the work reported in this paper, an intelligent grinding system for ultra precision aspherical surface machining was designed by considering the factors affecting the surface roughness and profiles accuracy. An aerostatic form was adopted to build the spindle of the workpiece and the spindle of grinder and ultra precision LM guide way was adopted in this system. And this paper deals with mirror grinding of an aspheric surface micro lens by resin bonded diamond wheel and spherical lens of BK7. It results was that a form accuracy of $0.6{\mu}m$ P-V and a surface roughness of $0.006{\mu}m$ Rmax.

• 한국진공학회지
• /
• 제21권6호
• /
• pp.287-294
• /
• 2012

위성체가 작동하는 우주환경인 초고진공상태에서는 각 부품에서 발생 할 수 있는 기체방출로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 광학렌즈를 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 최근 항공우주분야에서 활용 범위가 넓어지고 있는 PZT-5 계열 압전진동자의 위성부품 활용성 연구를 위하여 먼저 Collected Volatile Condensable Material 및 Total Mass Loss을 측정하여 규정된 0.1% 및 1.0% 이하의 값을 얻었고, 한국항공우주연구원에 설치된 베이크아웃(bake-out) 챔버를 이용하여 고온 및 고진공상태에서 500 $ng/cm^2/hr$ 이하의 낮은 Thermoelectric Quartz Crystal Microbalance 값을 얻어 위성체 부품으로의 적합성을 재확인하였다. 압전진동자에 대한 고진공 환경 전후의 압전 특성을 비교 분석한 결과 진공환경에 의한 전기-기계적 특성은 1% 미만으로 큰 변화가 없음을 확인하였다.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.63-68
• /
• 2015

Micro/nano patterns for optical concentration and diffusion have been studied in the various fields such as displays, optics, and sensors. Conventional micro patterns were continuous and linear shapes due to using linear-type light sources, however, recently non-continuous patterns have been applied as point sources are used for dot-type light sources such as LEDs and OLEDs. In this study, a hybrid machining technology combining an indentation machining method and an AAO process was developed for manufacturing the non-continuous micro patterns having nano patterns. First, mirror-like surfaces ($R_a<20nm$) of pure Aluminum substrates were obtained by optimizing cutting conditions. Then, The letter of 'K' consisting of the arrays of the micro patterns was manufactured by the indentation machining method which has a similar principle to indentation hardness testing. Finally, nano patterns were machined by AAO process on the micro patterns. Conclusively, a specific letter having nano-micro hybrid patterns was manufactured in this study.

• 한국광학회지
• /
• 제10권2호
• /
• pp.152-156
• /
• 1999

여기밀도 변화에 따른 펄스폭 연속 가변 Quenched Dye Laser(Q이)를 설계 제작하여 그 동작 특성을 분석하였다. 펌핑광원은 펄스폭 20 ns(FWHM), 에너지 150mJ의 XecCl 엑시머 레이저를 사용하였으며, 색소레이저의 활성매질은 Rhodamine 6G로서 에탄올(ethanol)용액에 2.5$\times$10-3[mol/l]의 농도로 용해되었다. 활성길이 5 nm인 색소셀에서 서로 평행한 양면을 공진기로 구성하여 색소레이저의 이완발진 출력특성을 얻었다. 이완발진의 펄스열에서 단일 펄스를 추출하기 위해 QDL를 구성하였다. QDL의 펄스폭을 가변하기 위해 초점거리 f=150 mm 접속렌즈를 이동시켜 색소셀에 조사되는 공간적 펌핑폭을 조절함으로써 여기밀도를 8.8$\times$1023[cm-3s-1]~2.8$\times$1023[cm-3s-1]까지 가변시켰다. 공간적 펌핑폭에 따른 펄스폭 가변 실험을 수행한 결과 QDL의 발진 펄스폭이 86 ps~201 ps 사이에서 연속적으로 가변됨을 알 수 있었다.

• 한국자기학회지
• /
• 제10권5호
• /
• pp.246-249
• /
• 2000

Fe$_{49}$ Co$_{49}$ V$_2$합금을 50$0^{\circ}C$, 75$0^{\circ}C$, 80$0^{\circ}C$ 및 90$0^{\circ}C$의 furnace에서 열처리한 후, 공냉조건으로 냉각하여 시료를 제작하였다. Michelson 레이저 간섭계를 이용하여 시료의 자기변형을 측정하였다 시료의 자기변형은 간섭계의 한쪽 팔에 piezoelectric transducer(PZT)를 부착하여 간섭계의 두 팔 사이의 상대적 광경로를 일정하게 유지하였으며 궤환회로의 전압을 광경로의 변화(자기변형)로 환산하였다. 시료를 90$0^{\circ}C$의 furnace에서 열처리한 후, H = 60 Oe에서 Fe$_{49}$ Co$_{49}$ V$_2$합금의 자기변형을 측정한 결과열처리 전 2$\times$$10^{-6}$ 에서 33.68$\times$$10^{-6}$ 가지 증가하였다. 이것은 시료의 미세구조가 변화되어 자기특성이 개선된 것으로 생각된다.

• 한국지능시스템학회논문지
• /
• 제24권6호
• /
• pp.609-614
• /
• 2014

소뇌 운동실조는 점차 진행되는 신경퇴행질병이며 운동 조절을 위한 기능의 상실을 동반하기에 환자의 삶을 심각하게 저하시킨다. 소뇌 운동실조 환자는 운동제어 과정에서 부적절한 폐회로 소뇌 반응으로 인해 운동 명령이 제한된다. 본 논문에서는 최근 뇌-컴퓨터 인터페이스 기술을 이용하여 소뇌의 이상으로 인한 운동실조 환자들이 외부기기를 제어할 수 있도록 운동상상 기반의 뇌파의 특성을 분석하고 이를 이용한 뇌-컴퓨터 인터페이스 기법을 제안한다. 뇌파 기반의 뇌-컴퓨터 인터페이스의 효용성을 검증하기 위하여 소뇌 운동실조 환자와 정상인 그룹에서 운동상상에 따른 뮤밴드 파워를 조절하는 능력을 비교하였다. 이를 통하여 소뇌 운동실조 환자에의 뇌-컴퓨터 인터페이스의 가능성을 보여준다.

• 비파괴검사학회지
• /
• 제36권3호
• /
• pp.188-194
• /
• 2016

본 연구에서는 Pt/Ti 박막과 기판 사이 계면의 접합특성을 비파괴적으로 평가하는 acousto-optic 기법을 제안한다. 현재 상용화된 기술만으로 마이크로/나노 스케일의 박막을 평가하는데 많은 어려움이 있기 때문에 미세구조 변화에 민감한 광학기술과 음향기술이 결합된 간섭계를 적용하여 연구를 수행하였다. 사용한 기법은 마이켈슨 간섭계를 기반으로 하며, 거울에 의한 광 경로차 대신 박막시험편 계면의 진동 영향에 따라 발생하는 간섭현상을 분석하였다. 박막시험편은 특정 주파수에서 공진과 유사한 현상을 보이고 이로 인해 프린지 패턴의 콘트라스트가 낮아지므로, 각 주파수 대역별 프린지 패턴 변화를 스펙트럼 결과로 정량화하여 제안된 기법을 이용한 박막의 접합특성 평가 가능성을 확인하였다.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.263-268
• /
• 2014

Nanocrystalline diamond(NCD) coated SiC balls were applied in a ball-on-disk tribometer. After seeding in an ultrasonic bath containing nanometer diamond powders, $2.2{\mu}m$ thick NCD films were deposited on sintered 3 mm diameter SiC balls at $600^{\circ}C$ in a 2.45 GHz microwave plasma CVD system. Bare $ZrO_2$ and SiC balls were prepared for comparison as test balls. Tribology tests were performed in air with pairs of three different balls and mirror polished steel(SKH51) disk. The wear tracks on balls and disks were examined by optical microscope and alpha step profiler. Under the load of 3 N, the friction coefficients of steel against $ZrO_2$, SiC and NCD-coated balls were between 0.4 and 0.8. After a few thousands sliding laps, the friction coefficient of NCD-coated balls dropped from 0.45 to below 0.1 and maintained thereafter. Under a higher load of 10 N or 20 N with a long sliding distance of 2 km, $ZrO_2$ and SiC balls exhibited the similar friction coefficients as above. The friction coefficient of NCD-coated balls was less than 0.1 from the beginning and increased to above 0.1 steadily or with some fluctuations as sliding distance increased. NCD coating layers were found worn out after long duration and/or high load sliding test, which resulted in the friction coefficient higher than 0.1.