• Korean Journal of Optics and Photonics
• /
• v.29 no.4
• /
• pp.149-158
• /
• 2018

A generalized structural design equation can be used to simplify and systematize a telecentric lens system composed of multiple lenses, as a creative design method of the authors. Through this structural equation, we have investigated the feasibility and design methodology of a telecentric lens equipped with a conventional smartphone camera for machine vision. As a result, we could verify and present a useful, generalized structural equation termed the $f{\theta}$ formula, being able to divide and combine the whole telecentric lens system into two modularized lens groups.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.354-358
• /
• 2006

A silicon lens and an insulator of pyrex, components of a micro-electron column, should be assembled by aligning and stacking simultaneously. An optical alignment of a diffraction beam and a laser welding were employed for the assembly of a source lens and an Einzel lens with precision within $\pm$4% for the maximum aperture size. The experimental condition for optical alignment and laser welding are explained. Anodic bonding was used to assist in stacking lenses. A micro-electron column of smaller apertures assembled with precise alignment and fabrication was tested with a current image of a Cu grid of 9$\mu$m in linewidth, and showed a higher resolution in acceleration mode.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.159-165
• /
• 2011

Purpose: In this paper, the reliability and reproductivity of anti-reflection (AR) coating on ophthalmic lens using optical monitoring system (OMS) were investigated. Methods: The random error simulation and RunSheet performance in Essential Macleod software to confirm possibility of AR coating using OMS were performed. The coating process of 19 batches was carried out in order to perform reproductivity test of AR coating after simulation process. Results: As a result, the coating results of 19 batches had shown the excellent reproductivity of about 0.5% error. Conclusions: We confirmed the excellent reproductivity and reliability of AR coating on ophthalmic lens using optical monitoring system from our results.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.41-45
• /
• 2010

In order to obtain thinner and brighter backlight units (BLU), we simulated a new-type backlight unit. A micro-lens array sheet was formed on the upper plane of the light guide plate (LGP) comprising the backlight unit. Also, in order to match with the LGP, we simulated a functional optical sheet. The conventional BLU uses one LGP and four optical sheets, but we simulated a BLU that uses one optical sheet. Simulation results have revealed that our BLU can achieve the same luminance and 30% better view angle as compared with conventional ones.

• Korean Journal of Optics and Photonics
• /
• v.4 no.2
• /
• pp.145-156
• /
• 1993

From the optimal system specifications of optical parts in rear projection TV focused on competitive price and performances, we designed and developed projection lens which is able to be used on current broadcast standard NTSC and HDTV in common. Through the serial processes, which are initial design of all aberrations free, aspherization of the plastic lenses, optimization with tolerances and manufacturability, and athermalization, the lens was designed. The developed CRT-lens ass'y could display the 40-55 inches image and it's resolution is more than 1000 TV-lines.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1253-1257
• /
• 2004

We have developed new rear LCD Projection TV engine with 3 projection lens. It has high brightness and contrast ratio, however poor cooling conditions. If optical components close to light source, optical components are damaged on high temperature, especially the blue among RGB colors is weakest by heat In this study, a new enhanced cooling method of LCD projection TV with 3 lens is shown: the best suited design of duct and relations between LCD panel and polarizer lifetime with changed area of duct.

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2020

This paper presents a new method for designing a lens system stable against chromatic variation at a specified wavelength. Conventional lenses are corrected for chromatic aberration, but the new method suppresses chromatic changes of the marginal ray in the image-side. By doing so, paraxial properties of the lens system are stabilized against chromatic variation. Since the new method is based on paraxial ray tracing, the stabilizing conditions against chromatic variation are given by recurrence formulas. However, there is an analytic solution for the case of a cemented doublet in the air. A stable doublet at 405 nm wavelength is designed and analyzed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.784-787
• /
• 2003

The present work covers three-dimensional flow simulation and deformation analysis of injection molded plastic lenses using solid elements. A numerical scheme to evaluate part deformation has been proposed from the results of injection molding analysis. Proposed scheme has been applied to the injection molding processes of optical plastic lenses: a spherical lens and an aspheric lens for a photo pick-up device. Through the simulation processes. residual stress is estimated and the final deformed patters are obtained for both products. The reliability of the proposed approach has also been verified in comparison with the results of real experiments.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.213-217
• /
• 2009

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

• Journal of the Optical Society of Korea
• /
• v.10 no.2
• /
• pp.76-80
• /
• 2006

The proposed technique uses a combination of two systems, viz. a three dimensional stereoscopic system and a two-lens system. This novel combined system successfully produces a stereoscopic floating image in mid air near the observer. The two-lens system produces a floating image from the stereoscopic image originating from the stereoscopic system, and the two lenses eliminate the defects of the floating lens and concave mirror. The experimental results show that the two lenses eliminate the defects of the lens and the concave mirror, so that the proposed system successfully produces a touchable stereoscopic floating image.