• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.49-53
• /
• 2013

In this paper, we proposed a laser-based non-contact temperature measuring method for high speed rotating polycarbonate (PC) disk using transparency change of thermocolor. The thermocolor has abilities to change color and transparency due to a change in temperature. The thermocolor is applied on one side of polyvinylidene fluoride (PVDF) membrane. The thermocolor applied membrane is attached to inside of reaction chamber in disk. An optical system consisted of a laser beam radiator and a laser photometer is installed. Laser is irradiated at the bottom side of disk and the transmitted laser beam is detected by the laser photometer at the opposite side of disk. During the disk is rotating, laser is irradiated and detected simultaneously. The laser photometer senses the transmitted laser power and generates voltage as output. The temperature of disk can be detected during the disk is rotating up to 3000 RPM.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.399-402
• /
• 2004

In the optical drive system, adopting the optical flying-type head (OFH) flying on a removable plastic disk, the flying stability of the small OFH should be carefully considered to ensure the reliability for first surface recording. Additional micro actuators for focus servo are discussed for better interface of optical flying head on thin cover layered plastic disk to eliminate focus error due to the non-uniformity of cover layer thickness and the tolerance of lens assembly. This study gives two simulation results on the flying stability of the OFH. One is the dependence of the flying height and pitch angle variations on the wavelength and amplitude of disk waviness. The other is the flying stability of the slider and suspension system during the dynamic load/unload (U/UL) process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1545-1551
• /
• 2002

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.631-636
• /
• 2002

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using blue laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates for quality recording and read-out. In the present research, the effects of mold temperature and the insulation layer thickness on gapwise birefringence and the land-groove pattern were investigated. It was found that the values of the birefringence distribution were very sensitive to mold temperature history, and the level of birefringence reduced and, furthermore, the quality of replication was improved due to the insulation layer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.231-231
• /
• 2005

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.91.6-91
• /
• 2002

$\textbullet$ Simulation of the effect of external vibration on optical disk pickups.$\textbullet$ Vibration effect is cancelled with aceeleration feedforward. $\textbullet$ MEMS accelerometers are small enough not to require any mechanical design modification. $\textbullet$ LQR, LQG, and SMC type controllers are designed. $\textbullet$ With the feedforward, transmissibility is reduced significantly. $\textbullet$ Time domain simulation confirms the performance enhancement. $\textbullet$ The resultant system shows excellent command following characteristics as well.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.2
• /
• pp.64-69
• /
• 2009

In this paper, we investigate field distribution and interference pattern in the exit pupil and in the focal region. Also, we compare with metal and dielectric substrate for near-field recording. To obtain field distribution, we use modified vector diffraction theory and Zernike Polynomials. Finally, we design and optimize refractive index and thickness of disk for near-field surface recording and cover-layer incident recording.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.32-37
• /
• 2005

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.138-143
• /
• 2006

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.676-678
• /
• 2002

In this work, we present the novel scheduling algorithm of the multimedia data retrieval for the mobile disk drive. Our algorithm is focused on minimizing the power consumption involved in data retrieval from the local disk drive. The prime commodity in mobile devices is the electricity. Strict restriction on power consumption requirement of the mobile device put unique demand in designing of its hardware and software components. State of the art disk based storage subsystem becomes small enough to be embedded in handhold devices. It delivers abundant storage capacity and portability. However, it is never be trivial to integrate small hard disk or optical disk drive in handhold devices due to its excessive power consumption. Our algorithm ARM in this article generates the optimal schedule of retrieving data blocks from the mobile disk drive while guaranteeing continuous playback of multimedia data.