• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.62-72
• /
• 1997

The optical power splitter/couplers based on MMI(multimode interference) in GaAs/AlGaAs are studied. We presetn a design of optical power splitter/couplers, which have deeply etched multimode waveguide. The properties and fabrication tolerance on the etching depth, multimode waveguide width are simulatedusing a FD-BPM (finite difference beam propgation method). Proposed 1*N optical of designed device is 0.7dB smaller than the optical power splitter with a shallowly etched MMI section. For 0.5dB excess loss, the predicted fabrication tolerance is 0.6.mu.m on the multimode waveguide width of the 14 optical power splitter with a deeply etched MMI section. Also excess loss and uniformity of poposed 32*32 optical power coupler are below 0.3dB. The excess loss of proposed 32*32 optical power coupler is 2dB smaller than the optical power coupler with a shallowly etched MMI section. It is shown that the optical power splitters/couplers with a deeply etched mMI section have low loss, good uniformity, and improved fabriction tolerance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.484-487
• /
• 2004

Symmetric directional couplers are widely used in interferometers, switches, and various signal processing devices. Recently, several optical couplers using multimode fibers were reported, but these suffer from inefficient coupling of light into a branching fiber and/or low directivity. This paper presents the measurement and analysis of loss in the connection of optical fibers via the optical directional couplers. The functionality of the device is based on the principle that is symmetrical, the power in excited mode can be unambiguously directed into one of the output channel by varying and of its parameters. In this experiment, we measure the power of loss in the optical directional coupler at various radius of curvature. Before the measurement of loss in x-coupler, we polish the contact of the fiber surface in order that light can penetrate through another port. The results show that, when the radius of curvature is increased, the loss power is decreased and also approaches of the straight line case.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.210-217
• /
• 2007

The theoretical formulations are derived for calculating optical power change for intensity modulated fiber optical microphone. The optical power change is due to optical paths, misalignment and geometry of optical coupler. Based on the theoretical equations, three different optical couplers are simulated with respect to several angles of optical couplers. In order to evaluate the formulation, a multi-mode to multi-mode coupler which is one of abovementioned optical couplers is designed and characterized by carving out both static experiments and dynamic experiments. Considering experimental results, this paper conclude that the theoretical formulations is very useful for design optical coupler and this kind of fiber optic sensor is adequate to microphone.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.627-630
• /
• 2005

Novel unified criterion to optimize power coupling at optical directional couplers with discontinuous input/output interfaces is first defined and evaluated numerically. The numerical results reveal that maximum power transfer between guiding slabs without discontinuous interfaces is dominated by conventional phase-matching condition while the guiding structures with discontinuous interfaces has maximum power transfer at an equi-partition condition, which describes the power distribution condition between two rigorous modes propagating through optical couplers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.114-117
• /
• 1996

The wavelength selectivity in grating-assisted optical waveguide couplers is studied using a matrix method to analyse optical filter characteristics. The matrix method is extended to both 2-system modes and all guided system modes. The influence of fundamental design parameters on the performances of the optical filters by waveguide couplers is discussed.

• 한국광학회지
• /
• 제16권2호
• /
• pp.162-167
• /
• 2005

나노 크기 양자우물구조로 구성된 광통신용 방향성결합기를 모드전송선천 이론을 이용하여 설계하였다. 그 타당성과 유용성을 보이기 위하여 나노 결합기의 그 전파특성과 결합특성을 서로 다른 유효질량으로 구성된 이중 양자우물구조에서 분석하였다. 그 수치해석 결과 전체 전자에너지가 83.9 meV일 때, 결합길이 295.3 nm에서 최대 결합효율을 나타내었다. 더욱이, 이중 양자우물구조 사이의 장벽(barrier) 두께가 증가함에 따라 협대역(narrowband) 필터로 동작하였다.

• Journal of the Optical Society of Korea
• /
• 제9권3호
• /
• pp.99-102
• /
• 2005

Directional couplers of gradient-index plastic optical fibers were fabricated and characterized. In particular, we have employed a core-facet technique to make the directional couplers, which require mechanical side polishing and linkage. We have measured insertion loss, excess loss, and coupling ratio of the fabricated couplers as a function of polishing depth and coupling length. We found that polishing depth of $\~300{\mu}m$ and coupling length of $\~35mm$ are optimum conditions for minimizing the insertion and excess losses and for achieving 1: 1 coupling ratio.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.276-280
• /
• 2004

This paper first takes advantage of a rigorous modal transmission-line theory (MTLT) to analyze the filtering properties of optical waves guiding by grating-assisted fiber couplers (GAFCs). The numerical results reveal that MTLT serves as a suitable and powerful approach to evaluate systematically the dispersion properties and the characteristics of optical power transfer in GAFCs.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.326-332
• /
• 2010

We review the research on specialty fiber couplers with emphasis placed on the characteristics that make them attractive for biomedical imaging, optical communications, and sensing applications. The fabrication of fiber couplers has been carried out with, in addition to conventional single mode fiber, various specialty fibers such as photonic crystal fiber, double clad fiber, and hole-assisted fiber with a Ge-doped core. For the fiber coupler fabrication, the side polishing and the fused biconical tapered methods have been developed. These specialty fiber couplers have been applied to optical coherence tomography, fluorescence spectroscopy, fiber sensors, and optical communication systems. This review aims to provide a detailed statement on the recent progress and novel applications of specialty fiber couplers.

• 한국광학회지
• /
• 제24권1호
• /
• pp.17-22
• /
• 2013

High performance plastic optical fiber (POF) $N{\times}N$ star couplers are implemented based on fusing and combining technology. A set of cladding-removed POFs are fused into a solid body by heating and pressing them together to form the transition region between the input and output sides. The operation principle of the proposed star coupler is explained based on ray optics. To demonstrate the performance of the device, $2{\times}2$, $4{\times}4$ and $6{\times}6$ type POF couplers were fabricated and characterized. Performances of the POF star couplers were evaluated in terms of the flatness of the coupling ratios and excess losses.