• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• 한국통신학회논문지
• /
• 제40권2호
• /
• pp.380-384
• /
• 2015

As an extension of Visible Light Communication, Optical Camera Communications (OCC) will be a promising service for smart devices. Especially in line of sight marketing service and indoor localization application, by using camera which exists in smart devices, small amount of data (url link) can be broadcasted or find direction from the illumination system. This paper introduces the operation of wireless communications technology that transmits optical information from optical light source to camera, called Optical Camera Communications.

• 한국위성정보통신학회논문지
• /
• 제9권3호
• /
• pp.47-52
• /
• 2014

본 논문은 이미지 처리 기술을 이용한 광 카메라 통신(OCC: Optical Camera Communications) 기술을 제안한다. OCC 시스템의 구조 및 동작을 제안한다. 상용 30fps 카메라의 샘플링 동작에 의해 제한되는 데이터율을 증가시키기 위해 칼라 이미지 처리기술을 이용한 멀티칼러 전송기법을 제안한다. 멀티칼라 부호화 및 이미지 처리기반의 복호화 기법을 제안한다.

• 한국통신학회논문지
• /
• 제42권1호
• /
• pp.8-13
• /
• 2017

Compare with other communication system based RF technology, Optical Camera Communication (OCC) has limitation on data rate due to the low frame rate of camera. The limitation on data rate can be solved with multiple-input and multiple-output (MIMO) technology; and it is the final target of all researches on OCC. The MIMO topology can be implemented easily without breaking out the architecture of image sensor. For image sensor classification, there are two architectures have been developed: rolling shutter and global shutter. The operation of two techniques is different so the performance is also different. In this paper we analyze and evaluate the performance of the MIMO architecture for OCC.

• 한국정보전자통신기술학회논문지
• /
• 제11권4호
• /
• pp.445-451
• /
• 2018

본 논문에서는 국내에 존재하는 다양한 관광지 중 전주 한옥마을을 타겟으로 전주 한옥마을의 관광객에게 위치 기반 서비스 제공을 위한 광카메라통신 접목형 HMD-AR 인터렉션 시스템을 제안하였다. 제안한 시스템은 전주 한옥마을 내에 존재하는 조명, 디스플레이 등 다양한 Light 인프라로부터 광카메라통신 데이터를 수신하여 자신의 위치 정보와 더불어 ID정보를 통한 서비스 제공이 가능한 시스템으로 제안한 시스템에 필요한 광카메라통신 기술과 스마트디바이스 기반의 HMD-AR 시스템에 대하여 연구하였다. 제안한 시스템의 검증을 위하여 실제 HMD-AR 시스템을 구축하고 테스트를 진행하고 광카메라통신 기반의 위치 정보 및 ID 기반 서비스를 제공 할 수 있음을 확인하였다. 향후 제안한 시스템을 활용하여 전주 한옥마을 외에도 다양한 관광지에 적용될 수 있을 것으로 예상되며, 스마트디바이스 기반 HMD-AR과 관련하여 귀중한 사료로 활용할 수 있을 것으로 예상된다.

• 스마트미디어저널
• /
• 제12권3호
• /
• pp.49-59
• /
• 2023

차세대 무선 통신기술로 알려져 있는 Optical Camera Communication(OCC)은 많은 연구가 진행 되고 있다. 이러한 OCC 기술은 통신 환경에 의해 성능이 좌우되며 이를 개선하기 위해 다양한 전략이 연구되고 있다. 그중 가장 두각을 나타내고 있는 방법은 딥러닝 기술을 사용하여 OCC의 수신기에 CNN을 적용하는 방법이다. 하지만 대부분의 연구에서는 CNN을 단순히 송신기를 검출하는데 사용하고 있다. 본 논문에서는 CNN을 송신기 검출 뿐만 아니라 Rx 복조 시스템에 적용하여 실험한다. 그리고 OCC 시스템의 데이터 이미지는 다른 이미지 데이터셋과는 다르게 비교적 분류가 간단하기 때문에 대부분의 CNN 모델에서 높은 정확도의 결과가 나타날 것이라는 가설을 세웠다. 가설을 증명하기 위해 OCC 시스템을 설계 및 구현하여 데이터를 수집하였고 12가지의 다양한 CNN 모델에 적용하여 실험했다. 실험 결과 파라미터수가 많은 고성능의 CNN 모델 뿐만 아니라 경량화 CNN 모델에서도 99% 이상의 정확도를 달성하였고 이를 통해 스마트폰과 같은 저성능 계산 장치에 OCC 시스템 적용이 가능함을 확인했다.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1416-1423
• /
• 2017

Lane detection technology is one of the most important issues on car safety and self-driving capability of autonomous vehicle. This paper introduces an accurate lane detection scheme based on OCC(Optical Camera Communication) for moving vehicles. For lane detection of moving vehicles, the streetlights and the front camera of the vehicle were used for a transmitter and a receiver, respectively. Based on the angle information of multiple streetlights in a captured image, the distance from sidewalk can be calculated using non-linear regression analysis. Simulation results show that the proposed scheme shows robust performance of accurate lane detection.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.878-883
• /
• 2018

This paper proposes a method for transmitting instruction between vehicles in a moving situation using RC Car having camera. Information of preceding RC Car was transmitted by LED using Optical Camera Communication(OCC). Rear RC Car follows the preceding one by analyzing transmitted OCC data based on image processing. Through this procedure, the information reception ratio according to the distance change of two RC Cars is confirmed. Through experiments, we showed that our proposed scheme enables the possibility of vehicle platooning.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.278-282
• /
• 2011

We discuss two possible optical noise sources in an electro-optic camera loaded on a low earth orbit satellite. The first noise source was a reflection at the window for signal rays incident upon the window which is placed before the FPA plane. The second noise source came from a reflection at the surface of the FPA cell when the signal flux is not entirely absorbed. We investigate the noise generation processes for two optical noise sources, and a parametric solution is used to estimate the optical noise effects.

• 센서학회지
• /
• 제27권1호
• /
• pp.6-12
• /
• 2018

In this paper, a 32-variable pulse position modulation (32-VPPM) scheme is proposed to support a red-green-blue light-emitting-diode (RGB-LED)-based optical camera communication (OCC) system. Our proposed modulation scheme is designed to enhance the OCC data transmission rate, which is targeted for the wearable biomedical data monitoring system. The OCC technology has been utilized as an alternative solution to the radio frequency (RF) wireless system for long-term self-healthcare monitoring. Different biomedical signals, such as electrocardiograms, photoplethysmograms, and respiration signals are being monitored and transmitted wirelessly from the wearable biomedical device to the smartphone receiver. A common 30 frames per second (fps) smartphone camera with a CMOS image sensor is used to record a transmitted optical signal. Moreover, the overall proposed system architecture, modulation scheme, and data demodulation are discussed in this paper. The experimental result shows that the proposed system is able to achieve > 9 kbps using only a common smartphone camera receiver.