• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.80-82
• /
• 1997

An analytical study of the Dynamic Characteristics of a Fiber Optic Gyro is presented. A mathematical model appropriate to the Fiber Optic Gyro system suffering from the system vibration of a driving motor is derived. It is shown that the analysis is directly applicable to the Gyrocompass system.

• 한국의학물리학회지:의학물리
• /
• 제18권1호
• /
• pp.42-47
• /
• 2007

목적: 망간 조영증강 자기공명영상을 이용하여 시신경경로의 활성화를 추적해 보고자 하였다. 대상 및 방법: 뉴질랜드 암컷 흰색 토끼의 망막에 $30{\mu}l$의 $MnSl_2(1mol)$ 용액을 주입한 후 고성능 경사자계 시스템이 장착된 임상용 1.5 기기에서 3D FSPGR 펄스열을 사용하여 고해상도 T1-강조영상을 망간 주입 후 12시간, 24시간, 48시간에 각각 획득한 후 시신경경로의 주요 해부학적 구조물에서의 조영증강을 관찰하였다. 또한 정량적 평가를 위하여 해부학적 위치에 동일한 원형의 관심영역을 정하여 신호강도를 측정 한 후 배경 잡음의 신호강도와의 신호대 잡음비(signal-to-noise ratio)를 구하였다. 결과: 망간 주입 후 시신경 경로상의 주요 구조물들이 조영증강 되었다 조영 증강된 주요 구조물로는 오른쪽 시신경(optic nerve), 시각교차(optic chiasm), 왼쪽 시신경 경로(optic tract), 왼쪽 가쪽 무릎핵(lateral geniculate nucleus), 왼쪽 상구(superior colliculus) 등 오른쪽 망막의 대측(contralateral) 시신경 경로상의 구조물이었으며 동측(ipsilateral) 시신경 경로는 조영증강을 보이지 않았다. 결론: 시신경계의 말단부위인 망막에 $MnCl_2$를 주입한 후 시신경계의 축삭을 통한 망간이온의 전파를 비침습적으로 관찰 할 수 있었다. 이러한 망간이온의 전파는 전압 개폐성 칼슘채널을 통하여 일어나는 것으로 여겨지며 특히 망막에 직접 주입하는 경우 전압 개폐성 칼슘채널의 빠른 이동 경로를 이용하는 것으로 추측된다.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1179-1184
• /
• 2003

The technique for measuring the rotational speed of tappet in direct acting type valve train system has been developed. The optic signal monitoring system with laser and optic fiber was designed to follow the signal of tappet rotation. The system was based on ON/OFF signal generation from the additional encoder teeth under the tappet with optic fibers attached photo transistor. The data showed that tappet rotation was affected by offset, oil temperature and cam shaft operating speed. Also it was found that tappet rotation increases with oil temperature. Tappet spin was delayed 10∼s20$^{\circ}$ cam angle after valve opening. The instantaneous rotational speed of tappet was reciprocal to cam shaft speed and the tappet and the cam angle ratio was located in the range of 0.1∼0.3.

• 한국정보전자통신기술학회논문지
• /
• 제3권4호
• /
• pp.70-75
• /
• 2010

이 논문은 광케이블인 optical fiber를 통해 의료용 signal을 전송 할 때 porarization obtain fiber 에서 mono mode fiber로 교체되는 지점에 integrated optic인 wave conductor를 사용하여, optical signal intensity의 maximum를 sensing 하기 위한 Algorithm Brent을 설계하고 이를 검토하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.37-41
• /
• 2005

The curing of thermoset resin is accompanied with the changes in chemical and physical properties. The cure monitoring techniques can be designed by tracing these property changes. This paper presents the cure monitoring technique with fiber optic sensors to detect the change of refractive index during the polymerization process of engineering epoxy resin. The fiber optic sensor system was developed to measure the reflection coefficient at the interface between the fiber optic and the resin. The correlation between the sensor output and the degree of cure was performed following Lorentz-Lorenz law. The isothermal data from the sensors are compared with the data from differential scanning calorimeter.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.231-240
• /
• 1999

The most important thing to be considered in designing stop lamps for automobiles is to satisfy the photometric requirement in various countries and achieve the equal image. To meet these requirements, parabolic reflector and fish-eye optics has been widely applied. The form of the embodied optic is most important in satisfying the photometric requirement and achieving the equal image because the impact of fish-eye optic is decisive. In this study, a series of researches has been performed to optimize of the fish-eye optic by analyzing beam pattern through the photometric simulation based on CATAI program. The optimized results have been shown to meet the various photometric requirements including non dazzling condition considering the following car. The methodology of this study is excepted to influence the development procedure of light system. The time and cost for the system development would be greatly saved by suing this simulaion technique.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.792-796
• /
• 2003

In this paper, to detect external sound frequency on the latticed structure, fiber optic sensor net using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 50cm in width and 50cm in height, the optical fiber, 50m in length, distributed and fixed on the latticed structure. Single mode fiber, a laser with 1,550nm in wavelength, 2${\times}$2 coupler were used. External sound signal applied to the fiber optic sensor net and the detected optical signals were compared and analyzed to the detected microphone signals against time and frequency domain. Based on the experimental results, fiber optic sensor net using Sagnac interferometer detected external sound frequency, effectively. This system can be expanded to the structural health monitoring system.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.569-576
• /
• 2004

In this paper, to detect external sound frequencies on the latticed structure, fiber optic sensor net using Sagnac interferometer was fabricated and tested. The latticed structure was fabricated with a dimension of 50 cm in width and 50 cm in height. The optical fiber of 50m in length was distributed and fixed on the surface of the latticed structure. Single mode fiber, a laser with 1,550 nm in wavelength, 2 ${\times}$ 2 coupler were used. External sound signal, 240 Hz, 495 Hz, 1.445 kHz, 2k Hz, applied to the fiber optic sensor net and the detected optical signals were compared to the detected microphone signals against time and frequency domains. Based on the experimental results, fiber optic sensor net using Sagnac interferometer detected external sound frequency, effectively. This system can be expanded to the structural health monitoring system.

• 한국음향학회지
• /
• 제20권7호
• /
• pp.89-93
• /
• 2001

최근 광섬유 하이드로폰 시스템은 차세대의 장거리 탐지용 수동 소나 시스템의 탐지 센서로 각광을 받고 있다. 소나 시스템으로서, 광섬유 하이드로폰 시스템은 수중에 전자부가 없이 다중화 기술을 바탕으로 많은 채널의 하이드로폰을 구성할 수 있는 장점을 가지고 있다. 본 논문에서는 다채널 배열 설계, 광-전자부, 하이드로폰 설계, 해상시험을 바탕으로 한 최근의 기술 발전 추세를 기술한다. 또한, 시분할 다중화를 바탕으로 32채널 혹은 그 이상까지 확장 가능한 간섭계형 다채널 광섬유 하이드로폰 배열 시스템 개발에 관하여 기술한다. 이를 위해 12채널의 시분할 다중화 하이드로폰 배열을 제작하여 해상시험을 통해 그 성능을 평가하였다.

• Journal of information and communication convergence engineering
• /
• 제1권1호
• /
• pp.35-38
• /
• 2003

Analyses of performance of wireless broadband communication systems employing fiber-optic link have presented. We have analyzed CNR penalty to evaluate system performance by taking into account, radio link considering rainfall attenuation, and optical link considering several carrier-to-noise ratio versus the optical modulation index.