• 정보통신설비학회논문지
• /
• 제4권1호
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.35-38
• /
• 2006

Using the repeaters is indispensable to WiBro services. Repeater types are distinguished by usage, output power and required performance. In the paper, we have studied on the WiBro digital optic repeater design which has excellent performance characteristic than any other repeaters. WiBro has specific characteristic on modulation method TDD(Time Division Duplex)/OFDMA(Orthogonal Frequency Division Multiple Access) so that it demands specified H/W to design WiBro repeater. Switching technique has been introduced because of TDD characteristic in each amplifier on the repeater. Time Advance technique has been considered because of OFDM characteristic among RAS(Radio Access Station) and repeater. In this paper, we have studied on these techniques to increase repeater cell coverage and distance between RAS and repeater.

• 정보통신설비학회논문지
• /
• 제10권3호
• /
• pp.110-114
• /
• 2011

The recent development of 4G mobile communication system has led to the rapid technology shift from conventional repeater systems using coaxial cable links towards new fiber optic repeater systems using fiber-optic links between the base station and the outdoor fiber optic repeater. The technical changes have brought up the increasing needs of robust optic links that can be used in harsh environments. Based on the most demanding requirements, a new outdoor optical connector employing 2-channel fiber optics, uplink and downlink, has been developed for the applications where the rugged environmental protection is essential. This paper describes the development of the new connector along with the design criteria and performance results. In summarizing, the prototype optical connectors have undergone extensive laboratory and field test, and they have shown exceptional optical and mechanical characteristics under extreme environmental conditions. The connectors have also exhibited capabilities of providing fast and easy installation while maintaining high performance fiber optic connections.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.389-393
• /
• 2003

This paper describes the design of enhanced TSSI RF Power Detector which has wide dynamic range using switch and Log amp. This Power Detector consists of low and high gain loops, and they adaptively switched by output DC voltage which is proportioned to input power level. Because Power Detector needs to separate the channel, so architecture is heterodyne system having 70MHz intermediate frequency. This proposed RF Power Detector is settle to the satisfaction of Closed loop power control system for W-CDMA optic repeater, and the obtained dynamic range cover the higher than 50dB.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.292-295
• /
• 2008

We propose a PON repeater system which transports multiple PON channels at the same time over the physical limit of the standard E-PON reach. To increase the physical reach up to 60km, we used the O-E-O (optic-electric-optic) signal regeneration on an active remote terminal which is placed between a central office and passive remote nodes. Also, by incorporating the well-established WDM technology to aggregate multiple E-PON channels, we successfully increased the split ratio (the number of subscribers per fiber core) to over 256.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.974-978
• /
• 2003

WCDMA 디지털 광 중계기용 down-converter를 제작하였다. WCDMA 사업자가 정한 규격에 따라 전체 시스템 블럭도 및 각 블럭들의 규격을 결정하였고, 그 블럭도 및 규격에 따라 down-converter를 설계하였다. 저주파대역 통과 필터, 증폭기, 자동 레벨 제어 감쇠기, 주파수 합성기 등의 주요 모듈을 설계/제작하고, 이들 각 모듈의 연동을 위한 주 기판을 설계/제작하였다. 고주파 신호의 스퓨리어스 잡음 및 시스템의 잡음을 억제할 수 있는 방안을 강구한다. 설계/제작된 RF 시스템의 각 구성 모듈 및 전체 수신부의 성능을 시험하여 설계 사양을 만족함을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.586-589
• /
• 2003

Repeater is developed. Based on the systems The up-converter of the WCDMA Digital Optic pecifications, the structure of the up-converter is accomplished and its block diagram is drawn. The up-converter is implemented according to these block diagrams. Subsequently the low pass filter, the automatic level controlled attenuator, the frequency synthesizer and other components for the up-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the up-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1988년도 추계학술발표회 논문집
• /
• pp.52-58
• /
• 1988

• 한국전자통신학회논문지
• /
• 제1권1호
• /
• pp.56-62
• /
• 2006

현재 국내.외 기간 통신망은 급격히 증가하는 고속 대용량 트래픽을 효율적으로 멀리 전송하기 위해 광증폭기를 이용한 파장분할다중화방식 (DWDM : Dense Wavelength Division Multiplexing) 광전송 시스템 통신망을 구축하고 있다. DWDM광전송 시스템에서 고속, 대용량 및 장거리 전송을 하기 위해서는 기존 3R 광 중계기 시스템에서 크게 중요시 않았던 광 fiber의 비선형(non-linearity) 전송제약 요소를 고려하여 통신망을 설계하여야 한다. 광통신망에서 장거리 전송 시 신호펄스 파형의 왜곡을 최소화하기 위해 영분산(zero-dispersion)을 구현하여야 하지만, 영분산으로 인하여 파이버의 비선형 현상이 나타나 신호 스펙트럼 왜곡 현상이 발생하는 문제가 있다. 즉 영 분산과 파이버의 비선형 사이에 서로 상충관계를 해결하여야 고속 대용량 트랙픽을 장거리 전송할 수 있다. 본 논문에서는 DWDM 해저 광 통신망에서 고속 대용량 트래픽을 장거리 전송하기 위한 기술을 알아보고, 영분산과 파이버의 비선형 사이에 상충문제를 해결 위한 분산관리 기법을 소개하고, 실제 한국-홍콩간 해저 광통신 구간에서 분산 맵 (dispersion map)을 설계 구현하였다.