• Journal of the Optical Society of Korea
• /
• 제9권3호
• /
• pp.119-122
• /
• 2005

Silica-based $2\times2$ thermo-optic (TO) switch using the MMI couplers which have a large fabrication tolerance of 110 (${\mu}m$ were fabricated and operated. Important features of the proposed switch are shown to be a polarization dependency loss of 0.1dB, an extinction ratio of 32.7dB, and a power consumption of 202.8mW.

• 한국광과학회:학술대회논문집
• /
• 한국광과학회 1998년도 학술대회지
• /
• pp.20-20
• /
• 1998

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1361-1368
• /
• 2005

In this paper, the theoretical method of measuring the tunnel convergence and underground displacement, the objective indices of assessing safety for tunnel construction, using the fiber optic sensor is studied by developing the program to automatically measure them. The model test of Con'c beam is conducted to evaluate reliability of the fiber optic sensor. Furthermore, using the RS232 communication protocol as well as Visual C# and Visual C++, the programming tools, the program was developed to detect automatically the measured value of the fiber optic sensor, calculate the tunnel convergence and underground displacement, predict the deformed shape of the tunnel, and evaluate loosening zone due to the tunnel excavation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.2891-2903
• /
• 2020

Phase-generated carrier (PGC) demodulation algorithm is the main demodulation methods in Fiber-optic interferometric sensors (FOISs). The conventional PGC demodulation algorithms are influenced by the carrier phase delay between the interference signal and the carrier signal. In this paper, an automatic carrier phase delay synchronization (CPDS) algorithm based on orthogonal phase-locked technique is proposed. The proposed algorithm can calculate the carrier phase delay value. Then the carrier phase delay can be compensated by adjusting the initial phase of the fundamental carrier and the second-harmonic carrier. The simulation results demonstrate the influence of the carrier phase delay on the demodulation performance. PGC-Arctan demodulation system based on CPDS algorithm is implemented on SoC. The experimental results show that the proposed algorithm is able to obtain and eliminate the carrier phase delay. In comparison to the conventional demodulation algorithm, the signal-to-noise and distortion ratio (SINAD) of the proposed algorithm increases 55.99dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.883-886
• /
• 1996

Instead of point-to-point hard wiring between substation yard equipments and SCADA RTU(Remote Terminal Unit), fibre optic cable will be used in the portion between Local Units and Central Unit in the future KEPCO 765kV substation. The connections between substation yard equipments and nearby Local Unit remain the same hard wiring. The new fibre optic system will provide security especially during ground faults and is immune to electrical noise. A prototype system will be manufactured and installed in the existing 154kV Yeosan Substation by the end of July this year and operated for one year. By incorporating the operation experiences acquired in the system, an improved system will be commercially applied to 765kV Shin-An-Seong Substation where 345kV GIS will be installed initially and act as the switching station in the year 1998. The system is composed of one Central Unit and several Local Units. The Central Unit is composed of two workstation level computers, one is in operation and the other backup, and a Communication Control Unit. The Local Unit uses the existing SCADA RTU technology and takes the form of a distributed one. Between the Communication Control Unit and Local Units, the fibre optic system with star-coupler is used.

• 정보통신설비학회논문지
• /
• 제4권1호
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.269-279
• /
• 2004

A new online multi-layer integrated routing (MLIR) scheme that combines IP (electrical) layer routing with WDM (optical) layer routing is investigated. It is a highly efficient and cost-effective routing scheme viable for the next generation integrated optical Internet. A new simplified weighted graph model for the integrated optical Internet consisted of optical routers with multi-granularity optical-electrical hybrid switching capability is firstly proposed. Then, based on the proposed graph model, we develop an online integrated routing scheme called differentiated weighted fair algorithm (DWFA) employing adaptive admission control (routing) strategies with the motivation of service/bandwidth differentiation, which can jointly solve multi-layer routing problem by simply applying the minimal weighted path computation algorithm. The major objective of DWFA is fourfold: 1) Quality of service (QoS) routing for traffic requests with various priorities; 2) blocking fairness for traffic requests with various bandwidth granularities; 3) adaptive routing according to the policy parameters from service provider; 4) lower computational complexity. Simulation results show that DWFA performs better than traditional overlay routing schemes such as optical-first-routing (OFR) and electrical-first-routing (EFR), in terms of traffic blocking ratio, traffic blocking fairness, average traffic logical hop counts, and global network resource utilization. It has been proved that the DWFA is a simple, comprehensive, and practical scheme of integrated routing in optical Internet for service providers.

• 한국인터넷방송통신학회논문지
• /
• 제8권5호
• /
• pp.43-49
• /
• 2008

통방융합서비스가 가시화되면서 성능이 더욱 우수한 안테나 모델을 개발하기 위해 다양한 기술적 접근이 시도되고 있다. 본 논문은 핸드폰에 부착할 수 있고, 통방융합용에 적용할 수 있는 소형모바일 안테나를 제안한다. 모바일 핸드셑용 안테나 설계에서, 크기축소는 중요한 요소 중의 하나이며, 루프안테나의 소형화는 접어진 다이폴을 굽힘으로서 실현된다. 짧은 평면 다이폴은 더 큰 입력저항을 만들기 위해 두 배의 접어진 다이폴과 루프안테나로 변환된다. 그 안테나의 전류분포는 루프 안테나와 같고, 방사패턴은 전방향 특성을 갖는다. 또한 전기광학효과 맵핑 시스템을 이용하여 전류유기 근거리장 방사패턴에 의해 RFID안테나의 성능을 분석한다.

• 한국전자통신학회논문지
• /
• 제10권9호
• /
• pp.979-986
• /
• 2015

광케이블을 이용한 보안 솔루션의 기술들은 아직까지 확실한 기술적 안정성을 확보하지 못한 상태이며, 그중 음향 감지를 통한 보안 시스템 역시 여러 가지 변수에 따른 오 경보 및 감지 실패 등의 완벽한 방어 기술을 확보하지 못한 상태이다. 본 논문에서는 수중 음향 통신의 수중 음향통신 채널에 대한 4가지 특성을 조사한다. 또한 수중에서 음향 신호 분석을 통한 광케이블을 이용한 감지 시스템 구축 방안으로서 감지 시스템을 구축한다. 또한 해저 광케이블의 신호 특성 분석과 잡음 분석을 수행한 후 이를 실제 적용 가능성을 확인한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.6-10
• /
• 1993

빛을 통신매체로 사용한 광통신은 저손실, 광대역성, 대용량화등의 장점 때문에 많은 중장거리 통신을 점유하고 있으며, 대형가입자군을 위한 광가입자망이나 LAN등에도 시험적용되고 있다. 따라서 광통신에 있어 광FIBER를 연결시키는 CERAMIC단자를 연구개발하는데 그목적을 두었으며, CERAMIC 단자의 재질로서는 구조재료로 주로 사용되는 ZIRCONIA(psz)를 선정하였으며 또한 정밀성형 및 소결등을 검토하였다.