• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.143-149
• /
• 2007

We have compared and analyzed the definition of medical devices, classification, who treats, controls and sales the spectacle frames in South Korea, USA and European Union in this paper. South Korea classifies the spectacle frames as an industrial products while EU and USA regards it them as the medical devices. Sunglasses are industrial products in South Korea and EU but they are still the medical devices in USA. Assignment of spectacle frames and sunglasses as an industrial products could bring into several problems. Restricted classification of medical devices on spectacle frames and sunglasses will resolve the problem mentioned.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.155-161
• /
• 2002

We studied the formation of nickel nano thin film that have various electrochromic properties. Nickel thin film having various thickness will apply photoelectronic devices, specially, electrochromic devices. These devices will apply lens, battery, glass and solar cell that have light, thin, simple and small that applied nanotechnology and quantum dot. Nickel thin film was coated by electrochemical method on ITO electrode. We studied the thin film properties by Cyclic voltammetry, Chronoamperometry. Impedance. X-ray diffraction analysis and Atomic force microscopy.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.261-266
• /
• 2005

Quaternary ammonium compounds(QACs) are some of the most commonly used antimicrobials. Antimicrobial polymers have been used as biomedical devices. In this Study, We synthesized new methacrylate monomers including quaternary ammonium moieties for preparation of contact lens, And also, we tested for antimicrobial activities against S. aureus, E. coli and P. aeruginosa. They showed much higher antimicrobial activities against all than the polymers of no including quaternary ammonium.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.229-234
• /
• 2002

The human eye and skin is exposed daily to solar energy. Expecially, the ultraviolet radiation (UVR) exposure has been damaged as an important causative factor in corneal disease. These damage of cornea was effected the retina. Therefore the eye function was effected very significant damage. As a results the protect of UVR in the eye is very important in ocular health. Therefore in living the intensive ultraviolet radiation environment by solar energy, human eye have protected the cornea and eyeball by the UV-blocking sunglass, eyeglass, goggles, and contact lens. Finally the specific UV-blocker lens devices available to the primary care for the subjects by optician. Of course, in the future these specific lenses have to development and study by fellowship.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.87-90
• /
• 2007

To manufacture the lens mold used in producing polycarbonate (PC) lenses, the core manufacturing is needed and this core manufacturing is generally performed by diamond turning machine (DTM) or computer numerical control (CNC) lathe. The numerical data about the lens core feature is necessarily needed for operating of these devices. Therefore, we developed the program which calculate the numerical data about the lens core feature. The program was composed to be able to input aspherical coefficients of lens feature, display the graph of lens feature, and save the numerical data file.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2003

We report a switchable RGB color filters for Lab on a chip. Ink color filter devices are fabricated by PDMS patterning process. The optical transmission in the ultra-violet and visible wavelengths of color filters have been investigated. The ink color filters are characterised by the slope and shape of the spectrum. The transmission of red/yellow filter consists of curves with a sharp cut-off spectrum at 600 and 500 nm. The blue output of the ink filter has 80% peak transmission and weak red-leak, while the green ink filter has 48% peak transmission and red-leak.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.73-77
• /
• 2008

Purpose: This research is that prepare amorphous or crystalline ZnO thin films with pure strong UV emission on soda-lime-silica glass (SLSG) substrates by low-temperature annealing. Methods: Growth characteristic and optical properties of the amorphous or nano-crystalline ZnO thin films prepared on soda - lime - silica glass substrates by chemical solution deposition at 100, 150, 200, 250 and $300^{\circ}C$ were investigated using X-ray diffraction analysis, ultraviolet - visible - near infrared spectrophotometer, and photoluminescence. Results: The films exhibited an amorphous pattern even when finally annealed at $100^{\circ}C{\sim}200^{\circ}C$ for 60 min, while crystalline ZnO was obtained by prefiring at 250 and $300^{\circ}C$. The photoluminescence spectrum of amorphous ZnO films shows a strong NBE emission, while the visible emission is nearly quenched. Conclusions: These results indicate it should be possible to cheaply and easily fabricate ZnO-based optoelectronic devices at low temperature, below $200^{\circ}C$, in the future.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.176-182
• /
• 2023

Optical coherence tomography (OCT) is being developed to guide various ophthalmic surgical procedures. However, the high cost of the intraoperative OCT system limits its availability mostly to the largest hospitals and healthcare systems. In this paper, we present a design and evaluation of a low-cost intraoperative common-path free-hand scanning OCT system. The lensed fiber imaging probe is designed and fabricated for intraocular use and the free-hand scanning algorithm that could operate at a low scanning speed was developed. Since the system operates at low frequencies, the cost of the overall system is significantly lower than other commercial intraoperative OCT systems. The assembled system is characterized and shows that it meets the design specifications. The handheld OCT imaging probe is tested on multilayer tape phantom and ex-vivo porcine eyes. The results show that the system could be used as an intraoperative intraocular OCT imaging device.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.315-322
• /
• 2014

Purpose: The physical and optical characteristics of hydrophilic tinted contact lens containing titanium silicon oxide nanoparticles and the basic hydrogel contact lens material containing 4-iodoaniline were examined. In this study, the utility of titanium silicon oxide nanoparticles as a UV-blocking material for ophthalmologic devices were investigated by measuring the UV transmittance of the produced polymer. Also, titanium silicon oxide nanoparticles only without the addition of 4-iodoaniline in primary contact lens materials by copolymerizing two groups were compared. Methods: For manufacturing hydrogel lens, HEMA, MA, MMA, 4-iodoaniline and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. Also, the titanium silicon oxide nanoparticles was used as additive. After polymerization the physical properties such as water content, refractive index, contact angle and spectral transmittance of produced contact lenses were measured. Results: Measurement of the physical properties of the copolymerized material showed that the water content, refractive index, UV-B transmittance and contact angle were in the range of 35.01~38.60%, 1.4350~1.4418, $34.15{\sim}57.25^{\circ}$ and 1.0~10.0%, respectively. Titanium silicon oxide nanoparticles is not used as an additive in the experimental group, the results of the measurement showed that the water content, refractive index, contan angle and UV-B transmittance of the hydrogel lens polymer was 34.00~36.80%, 1.4378~1.4420, $40.15{\sim}60.16^{\circ}$ and 1.8~25.0%, respectively. Conclusions: Also, the transmittance for UV light was reduced significantly in combinations containing titanium oxide nanoparticles.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.1
• /
• pp.15-23
• /
• 2015

Purpose: This study was investigated consumers' and optometrists' perception about spectacle frame in Busan and Ulsan to find on the right progress direction for conversion of spectacle frame into medical devices. Methods: 137 consumers surveyed in Busan and Ulsan and 100 optometrist surveyed in 'Busan continuing education of optometrist' filled in a questionnaire, then we compared and analyzed the results. Results: The 79% (108 people) of consumers and 94% (94 people) of optometrists agreed to conversion into medical devices of spectacle frame. The reason was shown that the consumer expected to improve the optometrist reliability and the optometrist expected to improve the optometrist professionalism. While, the 21% (29 people) consumer and 6% (6 people) optometrist opposed to conversion of spectacle frame into medical devices. The reason was revealed that the consumers were concerned about increase of medical insurance cost and the optometrists were concerned about that the spectacle frames can also be sold by medical device stores, not only by optical shops. Conclusions: The result of the survey was shown that the most of consumers and optometrists in Busan and Ulsan agreed on perception toward a conversion of spectacle frame into medical devices. But, we are considered that consumers' and optometrists' active attention and support are needed, with sequential implementation reflecting the concerns for this.