• Journal of Dental Anesthesia and Pain Medicine
• /
• v.15 no.4
• /
• pp.235-239
• /
• 2015

The Combitube is an emergency airway-maintaining device, which can supply oxygen to dyspneic patients in emergency situations following two-jaw surgery. These patients experience difficulty in opening the mouth or have a partially obstructed airway caused by edema or hematoma in the oral cavity. As such, they cannot maintain the normal airway. The use of a Combitube may be favorable compared to the laryngeal mask airway because it is a thin and relatively resilient tube. A healthy 24-year-old man was dyspneic after extubation. Oxygen saturation fell below 90% despite untying the bimaxillary fixation and ambubagging. The opening of the mouth was narrow; thus, emergency airway maintenance was gained by insertion of a Combitube. The following day, a facial computer tomography revealed that the airway space narrowing was severe compared to its pre-operational state. After the swelling subsided, the patient was successfully extubated without complications.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.87-95
• /
• 2007

The ocean and meteorological payloads of COMS are concerned to experience degration of image quality due to the disturbance induced by the motion of moving parts of the payloads. And thruster firings for stationkeeping and wheel offloading are expected to degrade the image quality of the optical payloads. In case of COMS, in order to keep the optical payload free from the mechanical interference from the other payload, the operation design approach has been taken. This paper introduces the operation design of COMS taken to avoid these problems. In order to meet users requirement by avoiding the degradation of image quality, the timeline of optical payloads and housekeeping are optimized, and operational constraints are applied to the mirror motion of the meteorological payload. This paper also introduces the results of time budget analysis performed to validate the operation design.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.187-198
• /
• 2020

This study investigates the determinants of the likelihood of a tax re-audit in Korea. It adopts a researcher-administered questionnaire survey method for data collection. The survey questionnaire is randomly distributed to 1,120 individuals with tax-related knowledge and experience. Using a final sample of 342 responses, we conduct a cross-sectional regression analysis to test our hypotheses. The results show that the level of tax non-compliance significantly affects the likelihood of a tax re-audit. This finding suggests that the increase in re-audits in Korea is attributable to the tendency of the tax authority to conduct a re-audit to detect taxpayers' non-compliance behavior by excessively broadening the scope of re-audits. This study also finds that the level of tax non-compliance is influenced by the perception of procedural unfairness, measured by operational inconsistency and regulatory lack of clarity. Lastly, the results reveal that the level of tax non-compliance mediates the relationship between the perception of procedural unfairness and likelihood of a tax re-audit. This finding indicates that enhancing procedural fairness could fundamentally reduce unnecessary re-audits that infringe on the rights of taxpayers, as the likelihood of a tax re-audit is not solely determined by the level of tax non-compliance but also by perceived procedural fairness.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.145-160
• /
• 2012

The globe-trotting trend has been converted from tourism for the simple purposes of sightseeing and enjoyment to a form of learning and practicing the more specialized contents by directly participation. Traditional cultural resources have sufficient potential as culture and tourism assets that fit this kind of trend. Therefore, building proper tourist resources for their application has become a very urgent and important matter. To make masterpiece tourism packages through combined services of traditional cultural resources, it is necessary for operators to ponder diverse methods that can be used to develop various experience programs and conserve traditional cultural properties by continuously generating profits. The major results of this research are as follows. Firstly, this study proposes plans for unified tourist information and combined services of traditional cultural resources based on ubiquitous IT. Secondly, it is ascertained that the organization of combined operational consultative groups and the improvement of operator' capability are required to execute combined services of traditional cultural resources. Thirdly, we propose business plans to generate profits in both product aspect and network aspect.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.60-68
• /
• 2000

Biofiltration is an environmentally-sound technology for elimination of VOCs and odorous compound from low-concentration, high-volume waste gas streams because of its simplicity and cost-effectiveness. It can be appled to the treatment of gases from publicly owned treatment works, composting facilities, landfill sites, and soil vapor extraction systems. The ability to design an effective biofilter system involves a combination of fundamental biofilter knowledge, practical experience, and bench- and pilot-scale testing. The objective of this paper was to review principle, design parameters, operational conditions, case studies, and economy of biofiltration through literature.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1995.03a
• /
• pp.158-165
• /
• 1995

A new fungible materal named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic chatateristics comparing with a conventional cast iron material. The dimensions of new colum structure are adjusted to keep the same stiffness (El value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up. one of which is for the measurement of natural mode and frequency using experimental modal analysis and the other one is for the measurement of vibration amplitude during idling operation of a machine fool. The comparison of maximum, accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measued on the bed motor base and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite materal exhibits a good anti-vibrational property even if it is used under the actual operational environments of machine eool as a practical structural element.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.904-915
• /
• 2004

Following the PART I, which explored the concept of ＇Fashion Goods＇ and ＇Basic Goods＇ in terms of design elements and operational differences, this study, PART II, examined the differences in merchandising process of the two different types of goods. Merchandising process was divided into three stages; planning, production, and presentation. The study adopted a qualitative approach by use of eighteen in-depth interviews with merchandisers and designers with a minimum of six years and a maximum of 15 years of career experience in apparel industry. According to the type of goods, different merchandising practices were found. Especially material and production order/reorder practices were noteworthy. Fashion goods had high possibility of using high-quality materials sourced abroad and few of them were reordered. In other words, reorder practices were established for basic goods only; replenishment was actively implemented for higher inventory turn of basic goods; usually materials and production for basic goods were sourced domestically. In conclusion, based on the differences, more refined merchandising strategies of apparel companies and consistent theory building in this field are required for fashion and basic goods respectively.

• Earthquakes and Structures
• /
• v.10 no.6
• /
• pp.1467-1486
• /
• 2016

This research focuses on seismic performance of a class of single pier skewed bridges with three different pier-deck connections; skew angles vary from $0^{\circ}$ to $60^{\circ}$. A well-documented four span continuous deck bridge has been modeled and verified. Seat-type connections with fixed and sliding bearings plus monolithic pier-deck connections are studied. Shear keys are considered either fully operational or ineffective. Seismic performances of the bridges and the structural components are investigated conducting bidirectional nonlinear time history analysis in OpenSees. Several global and intermediate engineering demand parameters (EDP) have been studied. On the basis of results, the values of demand parameters of skewed bridges, such as displacement and rotation of the deck plus plastic deformation and torsional demand of the piers, increase as the skew angle increases. In order to eliminate the deck collapse probability, the threshold skew angle is considered as $30^{\circ}$ in seat-type bridges. For bridges with skew angles greater than $30^{\circ}$, monolithic pier-deck connections should be applied. The functionality of shear keys is critical in preventing large displacements in the bearings. Pinned piers experience considerable ductility demand at the bottom.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.161-179
• /
• 2004

The purpose of this study is to suggest practical experience to develop small sized e-Learning system. The system is designed to help lecturers can arrange interface, organize contents, submit examinations and assess learner's score with no professional computing skills. The system has three advantages. First, it reduced implementation period through the use of GUI. Second, it is ordered to be personalized to construct format of the whole interface. Third, it has operational convenience which can be implemented on PC based system. These personalized features are enabling Learning on Demand. Also, there is comparatively low cost and high effectiveness on e-Learning implementation which facilitating quick adoption of e-Learning in its lectures.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.23-29
• /
• 2011

The renewed global interest in nuclear power has arisen from the need to reduce greenhouse gas emissions and to provide sufficient electricity for a growing global population before the accident at Fukushima Dai-ichi nuclear power plant in Japan. In spite of the safety issues of nuclear power plants raised by the ongoing Japanese nuclear crisis, many countries with nuclear power plants (NPPs) are still implementing license extensions of 10~20 years, and even consideration is being given to the concept of life-beyond-60, a further period of license extension from 60 to 80 years. To solving the materials aging problem is integral to its success. To evaluate the plant aging phenomena, a lot of background information such as materials and environment of the parts of the reactor and plant systems is needed by the experts. Information on degradation mechanisms is also used. In this paper, a materials degradation evaluation program called OnMDE-SYS (On-line Materials Degradation Evaluation System) is introduced. The developed program provides a variety of information on the materials and stressors as well as operational experience to the experts. It is also anticipated that the experts can perform materials degradation assessment on the web directly by referring to domestic and international information about the degradation of a nuclear power plants through OnMDE-SYS.