• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.334-339
• /
• 1994

In this work, we propose a planar three degree-of-freedom parallel mechanism as another type of assembly device which utilized joint compliances. These joint compliances can be adjusted either by properly replacing the joint compliances or by actively controlling stiffness at joints, in order to generate the desired operational compliance characteristics at RCC point, The operational compliance matrix for this mechanism is explicitly obtained by symbolic manipulation and its operational compliance characteristics are examined, it is found that the RCC point exists at the center of the workspace when the mechanism maintains symmetric configurations. Compliance characteristic and its sensitivity of this mechanism is analyzed with respect to the magnitude of the diagonal compliance components and two different matrix norms measuring compliance sensitivity. It is expected that the analysis results provide the designer with a helpful information to determine a set of optimal parameters of this RCC mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.725-730
• /
• 1994

A sodium chloride crystallizer shows oscillatory and nonlinear characteristics under its nucleating and growing process. Because these characteristics vary with operational condition, we can't control the product crystal size exactly with a PID controller or a sequence controller. Then, we make a model with threefold neural networks for the laboratory equipment that is a jet mixing crystallizer. We try to control the product crystal size with its neuro-model, and we reach the conclusion that our neuro-model is applicable to the practical crystallizer.

• Nuclear Engineering and Technology
• /
• v.37 no.1
• /
• pp.79-90
• /
• 2005

In this paper are reviewed the current status of nuclear fuel management and reactor operational aid tools. In addition, we indicate deficiencies in current capabilities and what future research is judged warranted. For the nuclear fuel management review the focus is on light water reactors and the utilization of stochastic optimization methods applied to the lattice, fuel bundle, core loading pattern, and for BWRs the control rod pattern/core flow design decision making problems. Significant progress in addressing separately each of these design problems on a single cycle basis is noted; however, the outstanding challenge of addressing the integrated design problem over multiple cycles under conditions of uncertainty remains to be addressed. For the reactor operational aid tools review the focus is on core simulators, used to both process core instrumentation signals and as an operator aid to predict future core behaviors under various operational strategies. After briefly reviewing the current status of capabilities, a more in depth review of adaptive core simulation capabilities, where core simulator input data are adjusted within their known uncertainties to improved agreement between prediction and measurement, is presented. This is done in support of the belief that further development of adaptive core simulation capabilities is required to further significantly advance the utility of core simulators in support of reactor operational aid tools.

• Korea Trade Review
• /
• v.44 no.3
• /
• pp.25-42
• /
• 2019

This research examined the mediation effect of Workforce Agility (WA) on the relationship between environmental uncertainty and operational performance. We manipulated the control variables that are known to be affected by employment flexibility. Employment flexibility is caused by idiosyncratic characteristics of Korean port system. The analysis was tested by Baron & Kenny's method. The result indicates that each path of the proposed model is significant. Furthermore, the mediation effect was checked with the Sobel Test. The research revealed that environment uncertainty poses an indirect effect on operational performance. Both supply/demand uncertainty and technological uncertainty affected operational performance through the mediation effect of WA. Most of the distribution centers located in Busan Newport Distripark are operated in a bimodal labor (human resource) system which includes both permanent employees (workers) and temporary employees (workers). This empirical research provides theoretical and managerial implications by suggesting ways to increase efficiency in distribution center operation through WA enhancement, and to improve the unloading labor system.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.47-55
• /
• 1995

We got operational safety limit angle being able to affect operators or materials surrounding the center of vertical line of the hoist on working from the theoretical review and experimental result. Then we inferred the distance to about 1.2m-1.4m from the center which materials hanged on the hook were able to effect to the surround. Therefore, we got about $7^{\circ}$ to the inclined or crossed operational safety limit angle of the crane with 6m lift. Also, we developed heisting rope automatic vertical controller which could control this kind of dangerous operation. And we did experiments again after establishing the inclined or crossed operational safety limit to $7^{\circ}$. The result is satisfied.

• Korean Journal of Chemical Engineering
• /
• v.36 no.3
• /
• pp.356-367
• /
• 2019

This work presents an advanced and systematic approach to analytically design the optimal parameters of a two parameter second-order internal model control (IMC) filter that satisfies operational constraints on the output process, the manipulated variable as well as rate of change of the manipulated variable, for a first-order plus dead time (FOPDT) process. The IMC parameters are designed to minimize a control objective function composed of the weighted sum of the error between the process variable and the set point, and the rate of change of the manipulated variable, and to satisfy the desired constraints. The feasible region of the constrained IMC control parameters was graphically analyzed, as the process parameters and the constraints varied. The resulting constrained IMC control parameters were also used to find the corresponding industrial proportional-integral controller parameters of a Smith predictor structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1147-1154
• /
• 1993

This paper introduces a case of SCADA System replacing from centralized processing system to distributed/open architecture system. The cons and pros of the distinctive two system configurations were studied and the requirements of new system that would be enable to easily follow 21 century's technical and operational inovation were presented.

• Journal of Korean Society on Water Environment
• /
• v.30 no.1
• /
• pp.16-24
• /
• 2014

A combined watershed and receiving waterbody model was developed for operational water flow forecasting of the Nakdong river. The Hydrological Simulation Program Fortran (HSPF) was used for simulating the flow rates at major tributaries. To simulate the flow dynamics in the main stream, a three-dimensional hydrodynamic model, EFDC was used with the inputs derived from the HSPF simulation. The combined models were calibrated and verified using the data measured under different hydrometeological and hydraulic conditions. The model results were generally in good agreement with the field measurements in both calibration and verification. The 7-days forecasting performance of water flows in the Nakdong river was satisfying compared with model calibration results. The forecasting results suggested that the water flow forecasting errors were primarily attributed to the uncertainties of the models, numerical weather prediction, and water release at the hydraulic structures such as upstream dams and weirs. From the results, it is concluded that the combined watershed-waterbody model could successfully simulate the water flows in the Nakdong river. Also, it is suggested that integrating real-time data and information of dam/weir operation plans into model simulation would be essential to improve forecasting reliability.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.69-79
• /
• 2008

Operational continuity is not a simple issue that can be solved by a Back-Up center or an alternate site. Strategic issues including law, standards, etc demand a new approach in terms of the operational continuity management (OCM). Also, it is necessary to develop a new framework of OCM governance as a part of the corporate governance. Experts from corporate governance insist that OCM can be included in the corporate operational control and so it is important to set up a strategy for OCM in the organization. This paper describes how OCM governance suggests two aspects of effectively controlling corporate risks in the viewpoint of corporate governance. First of all, the top corporate management develops the strategy of operational continuity with regard to the corporate governance. Secondly, there is the aspect of how to build up and manage the strategy of operational continuity in the corporations.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.336-339
• /
• 1990

The permanent magnet synchronous motor windings are energized by sinusoidal excitation current. The frequency of the winding excitation current is synchronous with motor movement and the phase is a function of the motor position with respect to the stator. The total operational speed range of the system is substantially incresed by controlling the phase of the excitation currents at a function of the desired speed. This becomes the torque angle between stator rotating field and motor position. In this paper, torque angle control method is described for surface permanent magnet synchronous motor (SPMSM). The control circuit for realizing control method is investigated and the system test is carried out.