• 전자공학회논문지C
• /
• 제36C권8호
• /
• pp.35-45
• /
• 1999

본 논문에서는 $GF(p^m)$상에서 두 다항식의 가산 및 승산 알고리즘을 제시하였고, 가산 및 승산 알고리즘을 수행하는 전류 모드 CMOS에 의한 $GF(4^3)$상의 직렬 입력-병렬 출력 모듈 구조의 4치 연산기를 구현하였다. 제시된 전류 모드 CMOS 4치 연산기는 가산/승산 선택 회로, mod(4) 승산 연산 회로, mod(4) 가산 연산 회로를 2개 연결하여 구성한 MOD 연산회로, mod(4) 승산 연산 회로와 동일하게 동작하는 원시 기약 다항식 연산 회로에 의해 구현하였으며, PSpice 시뮬레이션을 통하여 이 회로들에 대하여 동작 특성을 보였다. 제시된 회로들의 시뮬레이션은 $2{\mu}m$ CMOS 기술을 이용하고, 단위 전류를 $15{\mu}A$로 하였으며, VDD 전압은 3.3V을 사용하였다. 본 논문에서 제시한 전류 모드 CMOS의 4치 연산기는 회선 경로 선택의 규칙성, 간단성, 셀 배열에 의한 모듈성의 이점을 가지며, 특히 차수 m이 증가하는 유한체상의 두 다항식의 가산 및 승산에서 확장성을 가지므로 VLSI화 실현에 적합할 것으로 생각된다.

• 전자공학회논문지S
• /
• 제35S권4호
• /
• pp.96-104
• /
• 1998

In this paper, the circuit of DTCNN designed using dilation and erosion operation, a basic operation of gray-scale morphology, also each cell designed PE in order to having extension using the local connectivity. In this PE design, connection of between cell and cell become simple. And it is realized to easily VLSI realization as well as to circuit to be parallel processing. As the resutls of simulations, the proposed method was verified to improved more operation speed than the sequential data processing, parallel processing DTCNN was implemented in a 0.8.mu.m CMOS technology using COMPASS Tool.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1097-1108
• /
• 2023

Recently, demand for technology for energy economy and stable supply is increasing due to the increase in power demand of loads. The amount of DC power generation using new and renewable energy is noticeably increasing, and the use of DC power supplies is also increasing due to the increase in electric vehicles and digital loads. During parallel operation to increase the capacity of the power converter, the module bus method or the method using Can communication and serial communication has significant difficulties in smooth operation due to communication time delay for information sharing. Synchronization of information sharing of each power converter is essential for smooth parallel operation, and minimization of communication time delay is urgently needed as a way to overcome this problem. In this paper, a new communication method using pulse width information is proposed as a communication method specialized for parallel operation of power converters to compensate for the disadvantage of communication transmission delay in the existing system. The proposed communication method has the advantage of being easily implemented using the PWM and Capture function of the microcomputer. In addition, the DC/DC converter for DC distribution was verified through simulation and experiment, and it has the advantage of easy capacity expansion when applied to parallel operation of various types of power converters as well as DC/DC converters.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 추계학술대회
• /
• pp.170-171
• /
• 2011

전체 수 출입 공급망 사슬관리에 있어서 항만의 운영 효율성은 아주 중요하다. 컨테이너 터미널에서는 안벽작업의 효율성을 극대화하기 위하여 더블 사이클과 듀얼 사이클 방법이 소개되었고, 야드 트랙터 할당의 효율성을 높이기 위해서 야드 트랙터(YT) 풀링 방법이 제시되었다. 모형은 시뮬레이션 분석 소프트웨어인 Arena를 이용하여 수립되었다.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.77-85
• /
• 2013

The efficient operation and management strategies of reservoirs in irrigation periods of drought events are an essential element for drought planning and countermeasure. Korea Rural Community Corporation has developed the real-time water level observation system of agricultural reservoirs to efficiently operate reservoirs, however, it is not possible to predict drought conditions, and only provides information of current situation. Hence, it is necessary to evaluate accurate irrigation vulnerability and efficiently reservoir operation rules using current water level. In this paper, the improvement methods of reservoir operation planning were developed with water supply vulnerability characteristic curves comparing to automatic water gauge at agricultural reservoirs. The 11 reservoirs were simulated applying the reservoir operation rules which was determined by irrigation vulnerability characteristic curves criteria and real time water level, and evaluated water supply situation in 2012 year. The analysis of results can be identified probabilistic possibility of water supply failures compared with the existing reservoir operation criteria. These results of efficient reservoir operation rules can be achieved enable irrigation planners to optimally manage available water resources for decision making, and contributed to maintain the water supply according to demand strategy for agricultural reservoirs management.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제8권1호
• /
• pp.7-12
• /
• 2002

The air ventilation system of operation rooms has been studied to prevent the cross infection during the operation. Operation rooms and air ventilation systems of three University hospitals were investigated. The distribution of microbe was measured by cultivating air samples in the operation room. A two-dimensional model for the cross-section of an operation room was developed for the CFD(Computational Fluid Dynamics) analysis. The characteristics of air flow in the empty operation room and in occupied operation room were calculated by using a CFD program. The current diffuser location of an old hospital did not deliver the clean air to the operation part efficiently. A new method to locate diffusers that improve air venting with little increase of the cost of equipment was suggested.

• 산업공학
• /
• 제11권3호
• /
• pp.115-128
• /
• 1998

This paper presents a development of operation scheduling and reactive operation scheduling system for hull fabrication. The methodology for implementing operation scheduling system is HHGA(Hierarchical Hybrid Genetic Algorithm) which exploits both the global perspective of the genetic algorithm and the rapid convergence of the heuristic search for operation scheduling. The methodology for the reactive operation scheduling is the revised HHGA which consists of manual schedule editor for occurrence of exceptional events and the revised scheduling method used in operation scheduling. As the results of experiment, it has been confirmed that HHGA is able to search good operation scheduling within reasonable time, and the revised HHGA is able to search load-balanced reactive operation scheduling with minimum changes of initial operation schedule within short period of time.

• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.18-23
• /
• 2009

It is hard to find an operation case using anti-submarine searching pattern(ASSP) developed by Korean navy since Korean navy has begun submarine searching operation. This paper proposes the method to develop hull mount sonar(HMS) based optimal submarine searching pattern by using genetic algorithm. Developing the efficient ASSP based on theory in near sea environment has been demanded for a long time. Submarine searching operation can be executed by using ma ulti-step and multi-layed method. however, In this paper, we propose only HMS based ASSP generation method considering the ocean environment and submarine searching tactics as a step of first research. The genetic algorithm, known as a global opination method, optimizes the parameters affecting efficiency of submarine searching operation. Finally, we confirm the performance of the proposed ASSP by simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.516-518
• /
• 1995

This paper presents the optimal short-term operation scheduling by using fuzzy linear programming method on cogeneration systems connected with auxiliary equipments. Simulation is performed in case of the bottomming cycle. Modeling of cogeneration systems and auxiliary equipments is done, the effectiveness of modeling is evaluated through the detailed simulation. After the optimal operation scheduling is established by using linear programming method, the last optimal operation scheduling is established by using fuzzy linear programming method. The results of simulation show the auxiliary equipments can be effeciently operated in case of the bottomming cycle by modeling proposed in this paper.

• Clinics in Shoulder and Elbow
• /
• 제9권1호
• /
• pp.60-67
• /
• 2006

Purpose: The purpose of this study was to compare the method of using coraco-clavicular (C-C) sling with modified Phemister operation by postoperative clinical results, radiologic analysis and complications. Materials and Methods: 33 patients of acromioclavicular joint dislocation were included in this study. Thirteen patients were treated with simple C-C sling method and twenty patients were treated with modified Phemister operation. The assesment of clinical and radiological evaluation were performed and the final results were examined by using the Weitzman's classification. Results: In the final result of C-C sling method group, forward elevation $161^{\circ}$, external rotation $70^{\circ}$, internal rotation T8 level, Visual Analogue Scale (VAS) 83.3 points were checked. In modified Phemister operation group, forward elevation $155^{\circ}$, external rotation $67^{\circ}$, internal rotation T6 level, VAS 83.8 points were checked. In coracoclavicular distance of C-C sling method group, pre-operation 12.82 mm and last follow up 8.37 mm were checked. In modified Phemister operation group, pre-operation 12.8 mm and last follow up 7.7 mm were checked. In functional evaluation by the Weitzman criteria, C-C sling group had excellent 8, good 1, fair 1 and modified Phemister group had excellent 13, good 4, fair 3. Conclusion: C-C sling method would be the better than the Modified Phemister operation because of short operation time and smaller skin incision.