• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.85-91
• /
• 2011

Experimental analysis has been carried out to investigate thermal characteristics of hydraulic system in special vehicles. Hydraulic system performance is largely influenced by oil temperature, and there are considerable performance decline and malfunctions in the system for high temperature conditions caused by heavy load and continuous operation. Transient oil temperature and pressure variation are analyzed and heat generation rates in the several main system parts are compared for various flow rates. With the start of system operation oil temperature gradually increases, and viscosity deceases by about 70% as temperature increases from $20^{\circ}C$ to $80^{\circ}C$. Operation pressure in the hydraulic system decreases with oil temperature, and its variation rate becomes less steep as oil temperature increases. Heat generation rate in hydraulic pump also depends on the oil temperature, and it reaches maximum near $50^{\circ}C$. These results in this study can be applied to optimal design of efficient hydraulic system in special vehicles.

• 설비공학논문집
• /
• 제28권3호
• /
• pp.115-122
• /
• 2016

In this study, 21 energy reduction factors were selected as architecture, system & operation, and lighting and equipment parts to analyze reduction method of the load occurring in office buildings. Energy consumption simulation was performed. In the architecture part, saving rate (1.53%) of "occupant density" factor was the most efficient. In the system and operation part, saving rate (1.28%) of "interior VAV and exterior FPU type" factor was the most efficient. In case of lighting and equipment part, saving rate (12.42%) of "schedule" factor was the most efficient. In the three parts, saving rate of the lighting and equipment part was 27.32%. This was caused by the "schedule" factor. Saving rates of the architecture part and the system and operation part were 3.39% and 1.20%, respectively.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.37-44
• /
• 2003

목포항 해양수질개선에 대한 목포하수처리장 가동의 기여도를 평가하고 목포하수처리장 가동 후에 목포항에 유입하는 오염부하의 변화를 산정하기 위하여, 하수처리장 가동 전인 1997년 여론부터 1998년 봄까지의 건조기에 육지로부터 목포항에 유입하는 오염부하를 조사하고 목포항 주변의 하천들과 처리장 유출수의 계절별 유량 및 수질을 기초로 하여 유입오염부하를 산정하였다. 또한 하수처리장 가동 후인 1998년 겨울부터 1999년 볼까지 목포항에 유입하는 오염부하를 조사하고 목포하수처리장의 유입수 및 유출수의 오염부하를 산정하였다. 하수 처리장의 처리율은 화학적산소요구량(COD)이 약 49%, 총부유성고형물(TSS)이 약 76%, 휘박성부유물(VSS)이 약 79%, 총질소(T-N)가 약 3%, 용존무기인(DIP)이 약 7%, 총인(T-P)이 약 29%, 용존무기질소(DIN)가 약 -32%를 보였다. 하수처리장 가동으로 인한 목포항 내항수역 유입오염부하 변화율은 COD가 약 56%, TSS가 약 78%, VSS가 약 84%, DM이 약 45%, T-N이 약 22%, T-P가 약 34%, DIP가 약 -14%를 보였다. 목포항 전역으로 유입하는 총오염부하의 감소에 대한 하수처리장 가동의 기여율은 COD가 약 3%, TSS가 약 3%, VSS가 약 5%, DIP가 약 1%, T-P가 약 3%, DIN이 약 -1%로 나타났다.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.773-780
• /
• 2012

The article presented is concerned with an evaluation of the corrosion behavior of SA-508 low alloy steel (LAS) and Type 309L stainless steel (SS) cladding of a reactor pressure vessel under the simulated primary water chemistry of a pressurized water reactor (PWR). The uniform corrosion and galvanic corrosion rates of SA-508 LAS and Type 309L SS were measured in three different control conditions: power operation, shutdown, and power operation followed by shutdown. In all conditions, the dissimilar metal coupling of SA-508 LAS and Type 309L SS exhibited higher corrosion rates than the SA-508 base metal itself due to severe galvanic corrosion near the cladding interface, while the corrosion of Type 309L in the primary water environment was minimal. The galvanic corrosion rate of the SA-508 LAS and Type 309L SS couple measured under the simulated power operation condition was much lower than that measured in the simulated shutdown condition due to the formation of magnetite on the metal surface in a reducing environment. Based on the experimental results, the corrosion rate of SA-508 LAS clad with Type 309L SS was estimated as a function of operating cycle simulated for a typical PWR.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.193-203
• /
• 2012

This study analyzed regular transportation costs between port warehouses and processing plants and between processing plants and central distribution centers and further transportation costs relations according to empty transfer rates in each circulation by examining the distribution routes of imported grain including wheat, barley, corn, and soybean, namely port warehouses, processing plants, and central distribution centers. Based on the results, the study compared and reviewed the logistics transportation costs. The analysis results of the alternative model show that logistics operational costs could be considerably cut down by introducing a flexible vehicle transportation operational method, which is to change the vehicle loading parts for proper substitute transportation after unloading and transport them to other locations such as central distribution centers instead of returning empty, as an alternative to high operational costs deriving from empty vehicle operation in each circulation after unloading items in case of transportation of imported grain and processed items. The results allow for a more realistic approach to general problems with large-scale distribution network operation and provide a theoretical foundation to serve as a guide to establish policies for corporate operation of imported grain logistics systems.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.63-71
• /
• 2014

As power consumption increases, more power utilities are required to satisfy the demand and consequently results in tremendous cost to build the utilities. Another issue in construction of power utilities to meet the peak demand is an inefficiency caused by surplus power during non-peak time. Therefore, most power company considers power demand management with time-based electricity rate policy which applies different rate over time. This paper considers an optimal machine operation problem under the time-based electricity rates. In TOC (Theory of Constraints), the production capacities of all machines are limited to one of the bottleneck machine to minimize the WIP (work in process). In the situation, other machines except the bottleneck are able to stop their operations without any throughput loss of the whole manufacturing line for saving power utility cost. To consider this problem three integer programming models are introduced. The three models include (1) line shutdown, (2) block shutdown, and (3) individual machine shutdown. We demonstrate the effectiveness of the proposed IP models through diverse experiments, by comparing with a TOC-based machine operation planning considered as a current model.

• 한국식생활문화학회지
• /
• 제30권1호
• /
• pp.29-40
• /
• 2015

This study analyzed purchasing characteristics of local agricultural products and processed products as well as evaluated operation programs for Changnyeon festival participants. The purchasing rates of local agricultural products and processed products at this festival were 63.6% and 49.1%, respectively, and the main purchased crops were onion (42.6%) and garlic (20.7%). Drinks (43.6%) were highly purchased processed products. The recognition (95.3%) and preferences (98.4%) for Changyeong local agricultural products were high at this festival. Subjects (72.5%) responded that public relations were effective for sale at this festival, and evaluation of the operation program for the festival was $3.51{\pm}0.74$ (total score 5 points). Satisfaction with the experience event (37.7%) and exhibition event (33.6%) were high at this festival program, whereas participants gave low rates for art exhibition and sale events of local agricultural products (16.2%), cooking education (14.7%), direct education program (12.9%), and games (12.1%). This festival was an effective means of public relations, although purchase effects were not significant. This result suggests that the festival is necessary for planning a program to increase purchasing.

• Journal of Microbiology and Biotechnology
• /
• 제22권1호
• /
• pp.107-113
• /
• 2012

To develop a practical and cost-effective medium for bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, we investigated the feasibility and performance of bioethanol production in CSL (corn-steep liquor)-containing medium, where yeast Pichia stipitis was used and the repeated batch was carried out in a surface-aerated fermentor. The optimal medium replacement time during the repeated operation was determined to be 36 h, and the surface aeration rates were 30 and 100 ml/min. Under these conditions, the repeated-batch operation was successfully carried out for 6 runs (216 h), in which the maximum bioethanol concentrations reached about 11-12 g/l at each batch operation. These results demonstrated that bioethanol production could be carried out repeatedly and steadily for 216 h. In these experiments, the total cumulative bioethanol production was 57.9 g and 58.0 g when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. In addition, the bioethanol yields were 0.43 (about 84% of theoretical value) and 0.44 (about 86% of theoretical value) when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. CSL was successfully used as a medium ingredient for the bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, indicating that this medium may be practical and cost-effective for bioethanol production.

• 한국농공학회지
• /
• 제30권1호
• /
• pp.50-62
• /
• 1988

This study refers to the development of a hydrologic model simulating daily inflow and release rates for irrigation reservoirs. A daily - based model is needed for adequate operation of an irrigation reservoir sufficing the water demand for paddy fields which is closely related to meteorological conditions. Inflow rates to a reservoir need to be accurately described, which may be simulated using a hydrologic model from daily rainfall data. And the objective of this paper is to develop, test, and apply a hydrologic model for daily runoff simmulation. A well - known tank model was selected and modified to simulate daily inflow rates. The model parameters were calibrated using observed runoff data from twelve watersheds, Relationships between the parameters and the watershed characteristics were derived by a multiple regression analysis. The simulation results were in agreement with the data. The inflow model was found to simulate low flow conditions more accurately than high flow conditions, which may be adequate for water resources utilization.

• 한국식품영양학회지
• /
• 제12권4호
• /
• pp.358-363
• /
• 1999

This study was conducted to evaluate the extraction methods for the determination of antioxidants in soybean oil. Recovery rates of various antioxidants in soybean oil showed similar rates as 80.4~102.1% by solvent/solvent extraction method and 89.9~106.4% by sweep co-distillation method except 46.6~61.2% of PG at corresponding spiked concentractions. The maximun recovery rates of antioxidnts were obtained when extraction time and extraction temperature used in UNITREX were 20min and 21$0^{\circ}C$ respectively. In the recovery rates with the activation of florisil when 2% ofwater was added to florisil the highest recovery rates for TBHQ, BHA, BHT were obtained by sweep co-distillation met-hod. Therefore sweep co-distillation method showed less solvent simple operation and high recovery rate compared with solvent/solvent extraction method.