• 전기학회논문지
• /
• 제60권8호
• /
• pp.1485-1491
• /
• 2011

This paper deals with the technical problems for the protection devices, by simulating test facilities of protection coordination for Photovoltaic systems. In order to analyze the operation characteristics for the protection devices in the case that the Photovoltaic systems with bi-directional power supply are located in the feeder, this paper proposes the test facilities composed of model distribution system, protection device and model Photovoltaic systems. By performing the simulation for operation characteristics for the protection devices based on the test facilities, this paper presents the malfunction mechanism for the protection devices. The test results show that this paper is practical and effective for the technical guideline for the Photovoltaic systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.519-520
• /
• 2006

The aim of this study was biomechanical analysis of shelf operation in patients with dysplastic hip joint by finite element contact analysis. Two dimensional CT images were used to construct the finite element models to analyze the contact pressure, and the 3D expansion of the Ninomiya's method was used in the calculation of the resultant force in the hip joint. The surgery recovered the center-edge angles to the normal anatomical range and increased the contact areas in two patients. The maximum contact pressures and von-mises stresses were decreased. The present study provides the biomechanical guideline of optimal surgical parameters to maximize the surgical efficiency and the clinical outcomes in dysplastic hip joint using the shelf operation.

• 디지털융복합연구
• /
• 제11권10호
• /
• pp.403-409
• /
• 2013

본 논문은 미국 정부의 빅데이터 정책과 보안 이슈에 관해 고찰하였다. 빅데이터 R&D 이니셔티브 전략과 계획, NITRD 프로그램, 정부기관의 빅데이터 전략을 소개하였고, 또한 미군에서 빅데이터 운용환경, 군사 작전에 사용되는 빅데이터 정보, 주요 연구기관과 주제, 보안가이드라인 등에 대해 살펴보았다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1074-1084
• /
• 2015

These days, the widespread use of sensitive loads and distributed generators makes the solid-state circuit breaker (SSCB) an essential component in power circuits to achieve a high power quality for AC Grids. In traditional AC SSCB using SCRs, some auxiliary mechanical devices are required to make the reclosing operation possible before fault recovery. However, the proposed AC SSCB can break quickly and then be reclosed without auxiliary mechanical devices even during the short-circuit fault. Moreover, its fault current breaking time is short and its SSCB reclosing operation is fast. This results in a reduction of the economic losses due to fault currents and power outages. Through simulations and experiments on short-circuit faults, the performance characteristics of the proposed AC SSCB are verified. A design guideline is also suggested to apply the proposed AC SSCB to various AC grids.

• 디지털융복합연구
• /
• 제17권2호
• /
• pp.389-397
• /
• 2019

본 연구는 메이커 운동의 확산으로 증가하고 있는 메이커 스페이스의 효과적인 운영 및 내실화를 위한 서비스 디자인의 가이드라인을 제시하여 활용될 수 있도록 하는데 목적이 있다. 연구방법 첫째, 메이커 스페이스의 정의 및 현황 등에 관해 문헌 조사 및 선행 연구를 조사한다. 둘째, 정성조사 방법으로 메이커 스페이스 서비스에 대한 비디오 에스노그라피, 참여관찰 및 심층 인터뷰를 실시하였다. 셋째, 조사한 내용을 분석하여 메이커 스페이스에 대한 퍼소나, 블루프린트 등의 가이드라인을 제시한다. 연구결과 메이커 스페이스를 일반랩과 전문랩으로 분류하고, 메이커 스페이스에서 나타나는 4가지 형태의 퍼소나를 도출하고 체계화를 위한 블루프린트를 구축하여 설계 및 운영에 대한 가이드라인을 제시한다. 본 연구에서 제시한 서비스 디자인의 퍼소나와 블루프린트는 기존 메이커 스페이스의 서비스 개선과 신규 메이커 스페이스의 설계, 콘텐츠 구성 및 운영의 내실화에 활용될 수 있는 가이드라인이 될 것이다.

• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.973-991
• /
• 2022

전 세계적으로 해상을 마주하고 있는 여러 국가들은 기존의 전력 생산방식의 단점을 극복하고 해상풍력 개발을 통한 친환경에너지자원을 활용하고 있다. 해상은 넓은 해역에 대규모 풍력단지를 개발할 수 있는 장점이 있으나 해양구조물의 설치로 인해 선박의 안전운항이 위협받고 있다. 이에 따라, 선박 통항로와 해상풍력단지 간 상호 미치는 영향에 대해 분석하여 선박이 안전하게 운항할 수 있도록 PIANC에서는 표준 Guideline을 제시하였다. 그럼에도 불구하고, 표준 Guideline은 모든상황에서 동일한 이격거리를 산정하였다. 따라서 본 연구에서는 선회성능, 조우상태, 환경외력, 해상밀집도, 해상풍력발전기, 항로형태 등을 요소로 반영한 선박 통항로와 해상풍력단지 간 최적의 이격거리 산정 모델을 개발하였다. 개발된 모델 검증을 위한 시뮬레이션 결과, 운항 준비상태에 따른 입지 특성별 선회성능 크기는 산정 모델에서 제시한 크기와 유사하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권3호
• /
• pp.25-36
• /
• 2019

Purpose: To establish guidelines for local public hospitals, the survey was conducted primarily on the current status of local public hospitals, focusing on the zone configuration and the spatial area of the operating department. Methods: 3 Methods have been used in this paper. 1) Analyzing drawings to derive the net floor area of each room. 2) A literature survey about composition of the zone by infection control. 3) Observation survey for user circulation analysis. Results: The operation department consists of the major, secondary, support and connected zones according to the user's actions. The spatial area composition ratio for each zone is major zone: 41.79%, secondary zone: 10.87%, support zone: 23.10%, and connected zone: 24.24%. Implications: This study is a basic research for guideline for the operation department in local public hospitals. In this study, zones configuration of the operation departments are classified in terms of user actions and room functions. In the future, it is required to establish criteria considering infection control and copper connection aspects.

• 한국농공학회논문집
• /
• 제65권5호
• /
• pp.37-49
• /
• 2023

The drought risk has been increasing recently due to climate change causing the extreme climate to be more frequent. In order to supply agricultural water stably under drought, it is necessary to operate an agricultural reservoir in response to drought. To this end, it is crucial to establish appropriate drought response operation rules considering weather conditions and reservoir status. In the reservoir operation simulation, the supply amount differs from the actual reservoir supply for many reasons, including maintaining water levels for supply and accommodating farmers' requests. So, for a more realistic reservoir operation simulation, it is necessary to reflect the reservoir operation rules of the actual water management site. Therefore, in this study, through a survey, the standards for limitation of agricultural water supply applied to agricultural reservoirs in Korea were investigated, and the criteria for drought response reservoir operation (DRO) were established based on the survey. Then, the DRO was applied to the irrigation period for nine subject reservoirs. The applicability was evaluated by comparing the DRO result to the operation result of HOMWRS (Hydrological Operation Model for Water Resources System). The reservoir drought index, storage rate, and daily supply were compared for evaluation. From the result, DRO showed more stable operation results in most cases against drought as it has fewer days of water supply limitation and a somewhat reservoir storage rate which can be utilized for prolonged drought.

• 대한인간공학회지
• /
• 제36권1호
• /
• pp.9-21
• /
• 2017

Objective: The objective of this study is to understand the effect of angle and curvature of push-return switches, which are external factors in the operation environment inside the cars, on the feel of operation and to propose optimum alternatives. Background: Customers' needs for products are changing from functional and performance aspects to customer-led type where customers can reflect on their needs on the products. The operation inside cars is executed by HMI. The push-return switch is utilized as the most intuitive mode of HMI; therefore, this push-return switch, which is widely used, has to be developed by assessing the preference and satisfaction of the customer. Method: The angle and curvatures, which are external factors that affect the feel of operation, are drawn through surveying the preceding research literatures. The stages to construct alternatives in experiments are as follows: (1) the tactile switch is replaced after dismantling the switch assembly to evaluate the internal characteristics proposed by preceding researches, (2) a drawing is prepared by using a design software, is printed using 3D printer, and then it is attached on the switch assembly, and (3) evaluation for satisfaction of operation is carried out by using a driving simulator. Results: Both the angle and curvature that are external factors of switch significantly affect the feel of operation. However, interaction between the two factors is found insignificant. Therefore, an optimum alternative is proposed considering the experimental outcomes. Conclusion: This study evaluates the satisfaction in operation that affects the feel of operation environment inside the cars. Based on the study results, a guideline for switch design in the center fascia is proposed. Application: This study is expected to be used as basic data for designing automotive switches, as well as switches in the industries similar with the operation environments of cars.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.721-724
• /
• 2007

Estimating of LFG emission rate has been well established. But, relatively short history of LFG extraction in Korea, the data and the formular have not been well compared and analyzed. Here, even though the operation period of extraction for Daegu Bangcheon-ri is short, the relevant correlation between estimated and the actual has been tried to find. Hopefully, this will be a guideline for the future LFG forecasting.