• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2005

Purpose : Heavy metal use when producing the block from the workshop. At this time, production of heavy metal dust and fume gives risk in human. This like heavy metal to improve seriousness through measurement and analysis. And by the quest in solution is purpose of this thesis. Materials and Methods : Organization is Inductively Coupled Plasma Atomic Emission Spectrometer, and the object is Deajeon city 4 workshops in university hospital radiation oncology (Bismuth, Lead, Tin and cadmium). Method is the ppb the pumping it does at unit, comparison analysis. And the Calculation heavy metal standard level in air through heavy metal standard level in body and blood, so Heavy metal temporary standard set. Results : Subterranean existence room air quality the administration laws appointed Lead and Cadmium's exposure recommend that it is $3{\mu}g/m^3\;and\;2{\mu}g/m^3$. And Bismuth and Tin decides $7{\mu}g/m^3\;and\;6{\mu}g/m^3$ through standard level in air heavy metal and standard level in body and blood. Heavy metal measurement level of workshops in 4 university hospital Daejeon city compares with work existence and nonexistence. On work nonexistence almost measurement level is below the recommend level. But work existence case express high level. Also consequently in composition ratio of the block is continuous with the detection ratio. Conclusion : Worker's heavy metal contamination imbrued serious for solution founds basic part. In hospital may operation on local air exhauster and periodical efficiency check, protector offer, et al. And worker have a correct understanding part of heavy metal contamination, and have continuous interest, health control. Finally, learned society sphere administer to establishment standard level and periodical measurement. And it founds basic solution plan of periodical special health checkup.

• Korean Security Journal
• /
• no.34
• /
• pp.89-113
• /
• 2013

Travel by airplane using airport in globalized modern society is familiar to our life but such airport can be a target of terrorists who would threaten our safety. However, aviation terrorism which is represented by 9.11 terror gives horror beyond our imagination to modern people. Since the first airplane hijacking in Peru in 1931 happened, security organization in each nation has taken various prevention measures to block aviation terrorism. The most realistic measures to prevent aviation terrorism would be security check activity to control approach of terrorist that passengers on airplane and cargos are checked to find out dangerous article like explosive etc. But security check activity in Korea shifted to security check activity focused on private security for efficiency of airport operation differently from security check activity in advanced countries where public interests is strengthened according to risk of terror after 9.11 system. That is, since Incheon airport opened in March 2001, security check system focused on the police was changed. Now Incheon international airport Corporation instructs and supervises security check job and private security personnel are in charge of actual security check activity. But this check system has limitation in blocking terror activity by terrorists which is systematized and intelligent as time passes due to deteriorated job satisfaction of private security personnel and confusing supervising system. Accordingly, it is suggested to introduce risk management skill which is one of management strategy of private corporation for security check activity to prevent terror activity. With this skill, risk factors of aviation terror are identified and analyzed regularly, and each process such as setting of priority, activity to reduce risk, and assessment of security is carried out. And it would be necessary to do efforts, for example, to properly change level of security check according to threat of terror such as to place policeman at airport security in case threat of terror is severe. On the other hand, it is necessary to establish national police organization for good communication of security check activity in field and supervising function, which can encourage systematization and specialization of aviation security job.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.113-139
• /
• 2007

This study aims to, looking from a standpoint of network, has investigated the shipping industry's B2B e-marketplace, the characteristics that can earn electronic trust from the users, and characteristics of the web-site. It has examined the mechanism whereby electronic trust be earned and how it affects web-site involvement and service transaction intention. Ultimately, The study attempts to make proposals whereby such trust can lead for a cooperative trading community in the shipping industry's B2B e-marketplace The Covalence structural equation modeling was designed and empirically tested for the shipping industry's B2B e-marketplace. The shipping industry employees were given questionnaires and data were analyzed. Except for perceived security of the three characteristic factors on the web-site, the perceived site quality and characteristics factors in operation only affected co-variables. Transaction Fairness was determined to be the most important factor among exogenous factors increasing electronic trust. With regards to transaction rules, if a transaction is beneficial only to one side, then no long term transaction will not take place. If the concerned parties properly recognize that transaction fairness is crucial to electronic transaction, then it will enormously contribute to successful operations of shipping e-marketplace. Also, Perceived efficiency in transaction also affects electronic trust. This reduces transaction costs and speeds up and simplifies the transaction process. It has reduced greater time and costs than existing off-line transaction, and would positively affect electronic trust. By making an open forum for participants to obtain information for transaction, they can gather useful information, and at the same time, the web-site operator can provide information, which, in turn, will increase electronic trust in electronic transaction. Furthermore, such formation of trust in electronic transaction influences shipping companies in such a way that they will want to continuously participate in the transaction, raising web-site involvement. The result of increased trust is that shipping companies in the future will do business with each other and form a foundation for continuous transactions amongst themselves. Consequently, the formation of trust in electronic transaction greatly influences web-site involvement and service transaction intention. The results of the study have again proved that in order to maintain continuous business relationship with the current clients, electronic trust in virtual space, which operates the shipping industry's B2B e-marketplace, is important for the interested parties.

• Journal of dental hygiene science
• /
• v.5 no.4
• /
• pp.233-238
• /
• 2005

The study was intended to investigate elementary schoolers' oral health status according to whether the school have and manage an school oral health clinic or not in order to provide useful information for continuously developing the school oral health clinic 1,163 children in Hwasan elementary school in Hwasung city and 485 children in S elementary school in the same locality were selected as the experimental group and the control group, respectively, and orally examined from May 1st to 30th, 2004. The findings from the oral examination were as follows. 1. DMF rate was higher in the higher grades in both the groups. The rate was lower in the experimental group with 45.1% of the children than in the control group with 65.3% of the children. 2. DMFT rate also were higher as the grades were higher in both the groups. The ratio was lower in the experimental group with 30.4% of the children than in the control group with 44.6% of the children. 3. DMFT index was 1.0 in number in the experimental group and 1.6 in the control group. Index increase from the 1st grade to the sixth grade was also more positive in the experimental group. 4. DT rate was a little higher in the experimental group in the first graders, but comparatively decreased to the grades while increased in the control group. In the sixth graders, the rate was 42.4% in the experimental group and 87.7% in the control group, the former was less than the latter by about 50% point. 5. FT rate was a little higher in the control group for the first graders but increased in the experimental group to the grades. The rate in the sixth graders was higher by more than double in the experimental group. Based on the above findings, the region of the study had better oral health statistics than in other regions. The operation of school oral health clinics that provide dental health care to children at the right time seems to contribute to enhancing their dental health status by preventing against dental diseases and changing their relevant knowledge, attitude and behaviors. In the future, more school oral health clinics should gradually be prepared to push ahead with a sustained, extensive dental health project geared toward school-aged children. To make it happen, dental hygienists who are professional medical personnels should be taken advantage of, and in order to beef up the efficiency of preventive measures and oral health education, the best dental health care services should be offered by harnessing dental hygienists and dentists who work at public dental clinics run by local governments.

• Progress in Medical Physics
• /
• v.20 no.1
• /
• pp.37-42
• /
• 2009

Proton therapy facility, which is recently installed at National Cancer Center in Korea, generally produces a large amount of radiation near cyclotron due to the secondary particles and radioisotopes caused by collision between proton and nearby materials during the acceleration. Although the level of radiation by radioisotope decreases in length of time, radiation exposure problem still exists since workers are easily exposed by a low level of radiation for a long time due to their job assignment for maintenance or repair of the proton facility. In this paper, the working environment near cyclotron, where the highest radiation exposure is expected, was studied by measuring the degree of radiation and its duration for an appropriate level of protective action guide. To do this, we measured the radiation change in the graphite based energy degrader, the efficiency of transmitted beam and relative activation degree of the transmission beam line. The results showed that while the level of radiation exposure around cyclotron and beam line during the operation is much higher than the other radiation therapy facilities, the radiation exposure rate per year is under the limit recommended by the law showing 1~3 mSv/year.

• The Journal of the Korean bone and joint tumor society
• /
• v.7 no.1
• /
• pp.28-35
• /
• 2001

Purpose : Authors investigated the efficiency of preoperative MRI in suspicious glomus tumor and the clinical outcomes after marginal excision. Materials and Methods : In 10 cases of glomus tumors in the fingers, authors retrospectively analyzed the clinical data, including previous trauma, treatment history, preoperative symptoms, physical examination, plain radiography, MRI (9 cases), pathological findings and postoperative complications. Results : The patients had pain in 10 cases, tenderness in 9 cases, cold sensitivity in 3 cases and edema in one case. MRI showed low signal (3 cases) or iso-signal (5) intensity on T1 weighted image, high signal intensity (8) on T2 weighted image, and all the lesions were enhanced in gadolinium enhancement images. The exact locations of glomus tumors were median in 6 cases, lateral in 5, lateral fold in 2 and pulp in 3 in transverse section and nail bed in 5 cases and nail matrix in 5 in sagittal section. Marginal excision was performed by lateral approach in one case and transungual in 9 cases. Histologically, all 10 cases were composed of solid sheets of round cells interrupted by thin-walled blood vessels. Most of clinical symptoms were disappeared in all cases after operation. Nail deformity was found in one case, which was originated from nail matrix, however, there was no recurrence. Summary : Clinical symptom was the most impotant factor in diagnosis of glomus tumor in the fingers. However, preoperative MRIs were helpful in patients, who had obscure pain or prolonged clinical symptoms with suspicious glomus tumors. Preoperative MRI might be one of the most useful tools for establishing the exact diagnosis and detecting the location of glomus tumors, in spite of the relatively high expenses.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.419-425
• /
• 2017

In this study, the performance characteristics of the K-based sorbents (KEP-CO2P2, KEPCO RI, Korea) has been studied in relation with the heat exchanger structure and shape in a mixing zone of the carbonator in the bench-scale dry $CO_2$ capture process. Two types of heat exchangers (different structure and shape) were used in the carbonator as CASE 1 and CASE 2, in which the experiment has been continuously performed under the same operating conditions. During the continuous operation, working temperature of carbonator was 75 to $80^{\circ}C$, that of regenerator was 190 to $200^{\circ}C$, and $CO_2$ inlet concentration of the feed gas was 12 to 14 vol%. Especially, to compare the dynamic sorption capacity of sorbents, the differential pressure of the mixing zone in the carbonator was maintained around 400 to 500 mm $H_2O$. Also, solid samples from the carbonator and the regenerator were collected and weight variation of those samples was evaluated by TGA. The $CO_2$ removal efficiency and the dynamic sorption capacity were 64.3% and 2.40 wt%, respectively for CASE 1 while they were 81.0% and 4.66 wt%, respectively for CASE 2. Also, the dynamic sorption capacity of the sorbent in CASE 1 and CASE 2 was 2.51 wt% and 4.89 wt%, respectively, based on the weight loss of the TGA measurement results. Therefore, It was concluded that there could be a difference in the performance characteristics of the same sorbents according to the structure and type of heat exchanger inserted in the carbonator under the same operating conditions.

• Progress in Medical Physics
• /
• v.24 no.2
• /
• pp.92-98
• /
• 2013

The experimental verification of treatment planning on the treatment spot is the ultimate method to assure quality of radiotherapy, so in-vivo skin dose measurement is the essential procedure to confirm treatment dose. In this study, glass rod dosimeter (GRD), which is a kind of photo-luminescent based dosimeters, was studied to produce a guideline to use GRDs in vivo dosimetry for quality assurance of radiotherapy. The pre-processing procedure is essential to use GRDs. This is a heating operation for stabilization. Two kinds of pre-processing methods are recommended by manufacturer: a heating method (70 degree, 30 minutes) and a waiting method (room temperature, 24 hours). We equally irradiated 1.0 Gy to 20 GRD elements, and then different preprocessing were performed to 10 GRDs each. In heating method, reading deviation of GRDs at same time were relatively high, but the deviation was very low as time went on. In waiting method, the deviation among GRDs was low, but the deviation was relatively high as time went on. The meaningful difference was found between mean reading values of two pre-processing methods. Both methods present mean dose deviation under 5%, but the relatively high effect by reading time was observed in waiting method. Finally, GRD is best to perform in-vivo dosimetry in the viewpoint of accuracy and efficiency, and the understanding of how pre-processing affect the accuracy is asked to perform most accurate in-vivo dosimetry. The further study is asked to acquire more stable accuracy in spite of different irradiation conditions for GRD usage.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.199-205
• /
• 1998

Cullet Quality Control in auto glass bottle factory is the most important in recent days because of the increasing cost of materials in glass bottle. Since the composition of plate glass cullet is similar, the cullet quality using plate cullet in glass bottle factory is easily controlled. In addition to this, the price of plate glass cullet is so low that the cost reduction can be achieved. If the ratio of plate glass cullet and gush is over 25%, the liquidity of glass water become worse, which is caused by different compositions and viscosity of the components. As a results, Furnace bottom temperature becomes low and glass water becomes inhomogeneous. Thus production efficiency of glass bottle becomes low because of increasing devitrification in Dead Corner part in glass melting furnace. Three experimental methods – (1) increasing melting temperature, (2) using Booster, (3) using bubbler – were performed to increase the furnace bottom temperature and glass water homogeneity. The amounts of plate glass cullet was able to increase up to 90%, 70% and 60% without any devitrification using booster, bubbler and the method of glass melting temperature increase from $1480^{\circ}C$ to $1560^{\circ}C$ respectively. It is not possible to increase the glass melting temperature without the reduction of furnace operation time and the increase of fuel cost. The booster process has disadvantage of much electric energy consumption. Since the bubbler process uses physical convection of melting glass based on compression air, the homogeneity of molten glass is not so good as that of booster process but it can reduce the cost of glass bottle.

• Korean Security Journal
• /
• no.38
• /
• pp.7-32
• /
• 2014

This study is aimed to analyze problems of police budgetary execution and to suggest better ways for establishing effective budget implementation as well as legitimacy of securing budget in the field of police work. For this purpose, this paper analyzed the annual reports on police budgetary execution, from 2009 to 2012, conducted by National Assembly Budget Office. In result, most parts of the police budgetary execution were not satisfied with the audit standard, and especially in terms of management of budgetary execution, it showed 40% in inappropriateness. In addition, excessive and underestimate appropriation in the police budgetary execution, which happened frequently in other offices, was recorded on the second place. 10% of the amount of budget was executed for ordinance violence. Given results analyzed from each division, Transportation Division occupied 40% of the amount of related problems and all of types in the field did not meet the audit standard, thus it is required to manage budgetary execution effectively. In terms of Public Safety Division, the problem was related to budgetary allocation prior to execution, such as overlap in other works, excessive and underestimate appropriation, and inappropriate business plans. Director General for Planning and Coordination did not meet the standard of law system maintenance, Given the light of the result of analyzing programs, traffic safety and securing communication was the most problematic and support for police administration, crime prevention and protecting the disadvantaged, educating professional police officers, and establishment of policing infrastructure were required to be reformed in sequence. In order to resolve these problems, it is demanded to check budgetary execution and the process in business plans on a regular basis. Additionally, in case of using budget in inappropriate parts, tough penality including reduction of budget in related to the local police should be implemented to increase the importance of budgetary execution. Moreover, because of the fact that a part of problem of budgetary execution was originally caused by the budgetary allocation, it is advised to allocate police budget using the budget proposal of National Finance Act and Ministry of Strategy and Finance.