• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.23-31
• /
• 2011

The wind energy is one of the most prospective resources in renewable energy. However, the WTGS shouldn't be installed indiscriminately because the power system can be negatively influenced by a variable and uncertain nature of the wind energy. It is the reason why it has to be limited to install the WTGS thoughtlessly mentioned above that support the importance of the maximum penetration limit of wind power. It may required that power system operators suggests a new way of power system operation as percentage of the WTGS increase in the existing power system. The wind power is fixed in a limited area, so using rate of the wind power will be increased by installing additional WTGS. In this paper, we have studied on economic evaluation of the wind capacity increased by restricting the output of the WTGS as the way to increase the wind capacity.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.125-141
• /
• 2006

It is no unnecessary to tell the importance of foreign trade in Korea economics. Nevertheless, government's direct support is impossible owing to WTO's regulation. Accordingly, government have brought focus into trade facilitation as paperless trade. e-Trade document repositary building by government's budget and private sector's cooperation is a part of e-Trade platform and necessary function in connection with relay and certification of e-Trade document. This study examined the estimated operational problems of e-Trade document repositary as compared Licensed Electronic Document Repositary. Firstly, the operator of e-Trade document repositary undertake multiple role and function as Licensed Certification Authorities(e-sign Act), Licensed Electronic Document Repositary(Framework Act on Electronic Transaction) etc. Secondly, sufficient levy that meet operating cost of the e-trade document is the key point of e-Trade document repositary's success, because additional budget invest in that operation is too hard to do. Thirdly, the operator of the e-Trade document repositary have to keep fairness, objectivity and transparency because the operational right is exclusive.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.457-468
• /
• 2020

With continuous industrial development, the types, and amount of particulate matter (PM) have been increasing. Since 2018, environmental standards regarding PM have become more stringent. Pulse air jet bag filters are suitable for PM under the 20 ㎛ and, can function regardless of size, concentration and type. Filtration velocity and shape are important factors in the operation and design of the pulse air jet bag filters however, few established studies support this theory. In this research, numerical simulations were conducted based on experimental values and, several methods were employed for minimizing the pressure drop. In the pilot system, as the inlet duct velocity was faster than 19 m/sec, flow was not distributed equally and, re-entrainment occurred due to the hopper directional vortex. The multi-inlet system decelerated the hopper directional vortex by 25 ~ 30%, thereby decreasing total pressure drop by 6.6 ~ 14.7%. The guide vane system blocked the hopper directional vortex, which resulted optimal vane angle of 53°. The total pressure of the guide vane system increased by 0.5 ~ 3% at 1.5 m/min conditions. However, the filtration pressure drop decreased by 4.8 ~ 12.3% in all conditions, thereby reducing the operating cost of filter bags.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.687-699
• /
• 2013

IP-based IP-USN overcomes that disadvantages of verify the existence and geographic limits of the sensor by applying a standard technique called 6LoWPAN. However, in terms of the management and cost, The USN node should work for a long period of time without periodic batter replacement. but this solution is insufficient.In this paper, we configure the node using TI's CC2530 that low-power Soc solution and Contiki OS for optimal low-power operation IP-USN and implement the gateway to support connecting IP networks and Sensor networks. In addition, a system implemented to measure and analyze the energy consumption of an independent power supply to look for ways.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.84-97
• /
• 2012

M2M (Machine-to-Machine) Technology makes it possible to network all kinds of terminal devices and their corresponding enterprise applications. Therefore, several M2M platforms were developed in China in order to collect information from terminal devices dispersed all over the local places through 3G wireless network. However, when enterprise applications try to integrate with M2M platforms, they should be maintained and refactored to adapt the heterogeneous features and properties of M2M platforms. Moreover, syntactical and semantic unification for information sharing among applications and devices are still unsolved because of raw data transmission and the usage of distinguished business vocabularies. In this paper, we propose and develop an M2M Middleware to support agile application integration with M2M platform. This middleware imports the event engine and XML-based syntax to handle the syntactical unification, makes use of Ontology-based semantic mapping to solve the semantic unification and adopts WebService and ETL techniques to sustain multi-pattern interactive approach, in order to agilely make applications integrated with the M2M platform. Now, the M2M Middleware has been applied in the China Telecom M2M platform. The operation results show that applications will cost less time and workload when being integrated with M2M platform.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.1-8
• /
• 2019

Breath analysis using a portable device is better than the classical breath analysis system in terms of installation and operation. There is an increasing need to develop cost-effective equipment for testing gas sensors from the viewpoint of functionalities that can be applied applicable to portable devices. In the present study, an economical gas chamber for in-situ gas measurement is implemented with a single gas chamber without using expensive gas storage and control equipment; the gas response characteristics are analyzed using the above-described chamber. The main features of the implemented gas chamber are simple injection procedure, improved gas diffusion, easy measurement and cleaning, support for low-power mode measurement function for portable devices, and open source platform. Moreover, an analysis of gas response characteristics based on changes in sensor voltage show that the sensitivity and 90% response time are affected by the sensor voltage. Furthermore, the sensitivity graph has an inflection point in a specific range. The gas sensor applied in this study showed fast response speed and high sensitivity for sensor voltages of 3.0-3.5 V, regardless of the concentration of acetone gas, the target gas used in this study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.3
• /
• pp.441-450
• /
• 2022

The introduction of autonomous underwater gliders (AUGs) specifically addresses the reduction of operational costs that were previously prohibited with conventional autonomous underwater vehicles (AUVs) using a "scaling-down" design philosophy by utilizing the characteristics of autonomous drifters to far extend operation duration and coverage. Long-duration, wide-area missions raise the cost and complexity of in-water testing for novel approaches to autonomous mission planning. As a result, a simulator that supports the rapid design, development, and testing of autonomy solutions across a wide range using software-in-the-loop simulation at faster-than-real-time speeds becomes critical. This paper describes a faster-than-real-time AUG simulator that can support high-resolution bathymetry for a wide variety of ocean environments, including ocean currents, various sensors, and vehicle dynamics. On top of the de facto standard ROS-Gazebo framework and open-sourced underwater vehicle simulation packages, features specific to AUGs for ocean mapping are developed. For vehicle dynamics, the next-generation hybrid autonomous underwater gliders (Hybrid-AUGs) operate with both the buoyancy engine and the thrusters to improve navigation for bathymetry mappings, e.g., line trajectory, are is implemented since because it can also describe conventional AUGs without the thrusters. The simulation results are validated with experiments while operating at 120 times faster than the real-time.

• Geomechanics and Engineering
• /
• v.29 no.3
• /
• pp.249-258
• /
• 2022

A disc cutter is an excavation tool on a tunnel boring machine (TBM) cutterhead; it crushes and cuts rock mass while the machine excavates using the cutterhead's rotational movement. Disc cutter wear occurs naturally. Thus, along with the management of downtime and excavation efficiency, abrasioned disc cutters need to be replaced at the proper time; otherwise, the construction period could be delayed and the cost could increase. The most common prediction models for TBM performance and for the disc cutter lifetime have been proposed by the Colorado School of Mines and Norwegian University of Science and Technology. However, design parameters of existing models do not well correspond to the field values when a TBM encounters complex and difficult ground conditions in the field. Thus, this study proposes a series of machine learning models to predict the disc cutter lifetime of a shield TBM using the excavation (machine) data during operation which is response to the rock mass. This study utilizes five different machine learning techniques: four types of classification models (i.e., K-Nearest Neighbors (KNN), Support Vector Machine, Decision Tree, and Staking Ensemble Model) and one artificial neural network (ANN) model. The KNN model was found to be the best model among the four classification models, affording the highest recall of 81%. The ANN model also predicted the wear rate of disc cutters reasonably well.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.855-865
• /
• 2024

Commercial deployment of nuclear microreactors presents an opportunity for the industry to rethink its approach to manufacturing, siting, operation and maintenance, and fuel cycle management as certain principles used in grid-scale nuclear projects are not applicable to a decentralized microreactor economy. The success of this nascent industry is dependent on its ability to reduce infrastructure, logistical, regulatory and lifecycle costs. A utility-like 'Central Facility' that consolidates the services required and responsibilities borne by vendors into one or a few centralized locations will be necessary to support the deployment of a fleet of microreactors. This paper discusses the requirements for a Central Facility, its implications on the cost structures of owners and suppliers of microreactors, and the impact of the facility for the broader microreactor industry. In addition, this paper discusses the pre-requisites for eligibility as well as the opportunities for a Central Facility host site. While there are many suitable locations for such a capability across the U.S., this paper considers a facility co-located with the Vogtle Nuclear Power Plant and Savannah River Sites to illustrate how a Central Facility can leverage the existing infrastructure and stimulate a local ecosystem.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.265-276
• /
• 1999

Video on Demand (VOD) system is definitely one of main applications in upcoming multimedia era. In this research, we have designed and implemented a host-based scalable VOD system (SVOD) which is composed of low cost PC servers and runs on Linux kernel that is currently spotlighted in enterprise and research domains. Our contribution is as follows: first, the previous Ext2 file system was modified to efficiently support continuous media like MPEG stream. Second, the storage server features a host-based scalable architecture. Third, a software MPEG decoder was implemented using Microsoft's DirectShow$\circledR$COM. Finally, flow control between client and server is provided to suppress overflow and underflow of client circular buffer and supports FF VCR operation. We have known that it is possible to develop a thread-based and scalable VOD system on low cost PC servers and free Linux kernel.